Emerson DeltaV KJ3223X1-BA1 - Image 1
Emerson DeltaV KJ3223X1-BA1 - Image 2
Emerson DeltaV KJ3223X1-BA1 - Image 3
Click to enlarge
Emerson DeltaV KJ3223X1-BA1
Emerson DeltaV KJ3223X1-BA1 - Image 2
Emerson DeltaV KJ3223X1-BA1 - Image 3
Emerson DeltaV KJ2222X1-BA1
Emerson DeltaV KJ2222X1-BA1
Back to products
Emerson DeltaV KJ3243X1-BA1
Emerson DeltaV KJ3243X1-BA1

Emerson DeltaV KJ3223X1-BA1

Product Name:​ Emerson DeltaV KJ3223X1-BA1 Series 2 2-Wire Analog Input Module, 16-Channel, 4–20 mA with HART
Product Introduction:​
The KJ3223X1-BA1 is a high-density, 16-channel, 2-wire 4–20 mA analog input (AI) module for the DeltaV system. It receives current-loop signals from field transmitters and optionally communicates with HART-enabled devices for digital parameter access and diagnostics.
Category:
Description
Technical Specifications:
  • Manufacturer:​ Emerson Automation Solutions
  • Model / Part No.:​ KJ3223X1-BA1 (also referenced 12P2871X012)
  • Series:​ DeltaV Series 2
  • Input Channels:​ 16 (2-wire, loop-powered from field device)
  • Input Signal Range:​ 4–20 mA (also supports 0–20 mA / 1–5 mA if configured in software)
  • Resolution:​ 16-bit A/D conversion
  • Accuracy:​ ±0.1 % FS (typical); ±0.2 % over temp
  • Sampling Rate:​ 100 ms per channel (typical scan)
  • HART:​ HART 5/6/7 digital communication supported (via HART modem in terminal block or multiplexer)
  • LocalBus Power:​ 12 V DC, 150 mA typical
  • Field Power (Bussed):​ 24 V DC externally supplied (through terminal block), 600 mA max per carrier
  • Field Circuit Rating:​ 24 V DC, 30 mA per channel typical
  • Open Sensor Detection:​ Yes (< 3.6 mA indicates wire break if enabled)
  • Overrange Capability:​ Up to 21.5 mA readable
  • Hot-Swap:​ Yes
  • Operating Temp:​ -40 °C to +70 °C
  • Certification:​ Class I Div 2, ATEX Zone 2, CE, FM, CSA
  • Weight:​ ~0.18 kg
Functional Features:
  • Automatic channel calibration stored in EEPROM
  • HART variable (PV, SV, TV, CV) readable via DeltaV AMS Device Manager
  • Configurable engineering units, alarm limits, damping
  • Channel-level diagnostics reported to DeltaV alarm summary
Material & Construction:
  • Molded flame-retardant plastic housing (UL94-V0)
  • Gold-plated backplane edge connector
  • Designed for horizontal mounting in DeltaV I/O carrier
Installation & Notes:
  • Requires matching 2-wire AI terminal block (e.g. VE4003 or similar — confirm in DeltaV hardware setup)
  • Ensure field power supply is stable 24 V DC with proper noise filtering
  • Do not mix sourcing and sinking transmitters on same module group unless specified
  • Ground shield at field device or at barrier — not both ends
Applications:​ Pressure, differential pressure, temperature (via transmitter), flow, level — any 4–20 mA loop-connected process measurement in oil & gas, chemical, power, pulp & paper.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Emerson DeltaV KJ3223X1-BA1”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

EMERSON A6110 – Dual-Channel Shaft Relative Vibration Monitor

Technical Specifications:

  • Function: Communication Module or Controller within the Ovation System
  • Compatibility: Designed to integrate seamlessly with Emerson's Ovation platforms.
  • Communication Protocols: Supports industry-standard protocols such as Modbus, Ethernet/IP, and others to ensure broad compatibility across different devices and systems.
  • Processing Power: Equipped with sufficient processing capabilities to handle complex control algorithms efficiently.
  • Memory: Comes with adequate memory to store configuration data, control logic, and operational parameters.
  • Environmental Conditions: Rated for operation under specific temperature and humidity conditions, suitable for demanding industrial environments.
Read more
Quick view

EMERSON A631206 High-Precision Vibration Sensor Module

Technical Specifications:
  • Sensor Type: Piezoelectric acceleration sensor with built-in charge amplifier.
  • Measurement Range:
    • Acceleration: ±50 g peak (adjustable for custom applications).
    • Velocity: 0–100 mm/s RMS (derived from acceleration data).
    • Displacement: 0–2000 µm peak-to-peak (integrated from velocity).
  • Frequency Response: 0.5 Hz to 10 kHz (±3 dB).
  • Sensitivity: 100 mV/g (typical, configurable for specific needs).
  • Output Signals:
    • 4–20 mA current loop (for PLC/DCS integration).
    • Voltage output (0–10 V or ±5 V, selectable).
    • Digital output (RS485/Modbus RTU).
Read more
Quick view

EMERSON Liebert 805411 Precision Cooling Controller

Technical Specifications:
  • Control Capacity: Supports group control of up to 32 air conditioning units, with flexible grouping for backup, rotation, and load balancing.
  • Communication Interfaces:
    • RS485/Modbus RTU for integration with building management systems (BMS).
    • Ethernet for remote monitoring and configuration.
  • Input/Output Signals:
    • Analog inputs for temperature/humidity sensors.
    • Digital outputs for alarm and status indicators.
    • Relay outputs for compressor/fan control.
  • Display: LCD screen with multi-language support for real-time parameter visualization.
  • Power Supply: 24V AC/DC with redundancy options.
Read more
Quick view

Emerson Ovation 1C31197G01

Product Name: Emerson Ovation 1C31197G01 Analog Input Module Product Overview: The 1C31197G01 is a 16-channel 4–20 mA analog input module for the Ovation DCS, offering the highest channel density in the 1C31100 series. Model Series: Ovation 1C31100 Series
Read more
Quick view

Emerson Ovation 1C31219G01

Product Name: Emerson Ovation 1C31219G01 Analog Output Module Product Overview: The 1C31219G01 is a 4-channel 4–20 mA HART-enabled analog output module for the Ovation DCS. It provides smart output capability with HART protocol communication. Model Series: Ovation 1C31200 Series HART Output Modules
Read more
Quick view

EMERSON PR6426/010-140 + CON021/916-200 – Eddy-Current Vibration & Displacement System

The Emerson PR6426010-140 in conjunction with CON021916-200 appears to be part of Emerson's range of measurement and control devices, specifically designed for pressure measurement in industrial applications. These components are often associated with Rosemount, a brand well-known for its high-quality pressure transmitters and other instrumentation devices used across various industries.
Read more
Quick view

EMERSON VE3008 CE3008 KJ2005X1-MQ1 12P6381X042 – DeltaV MQ Controller

Technical Specifications:

  • Device Type: Digital Valve Controller / Positioner
  • Model Series: VE3008 and CE3008 are part of the same product family, with VE3008 typically representing the electronic control module and CE3008 indicating the complete positioner assembly.
  • Actuator Compatibility: Designed to work with pneumatic actuators, providing precise control over valve position.
  • Communication Protocols: Supports HART, FOUNDATION Fieldbus, and other digital communication standards for integration into control systems.
Read more
Quick view

MERSON 1X00781H01L Power Module

Technical Specifications:
  • Input Voltage: 100-240 VAC (47-63 Hz)
  • Output Voltage: 24 VDC
  • Rated Output Current: 10 A
  • Output Ripple & Noise: <50 mVpp
  • Efficiency: >85%
  • Operating Temperature Range: -40°C to +70°C
  • Storage Temperature Range: -40°C to +85°C
  • Protection Grade: IP30
  • Installation: DIN rail mounting
  • Dimensions: 100 × 58 × 25 mm
  • Weight: 350 g
Read more
Quick view