ABB LC100SSP7

Product Name:​ ABB S800 I/O — Module Terminal Unit (MTU) / Base for S800 I/O Modules — LC100SSP7
Product Brief:
The ABB LC100SSP7 is a passive Module Terminal Unit (MTU) belonging to the ABB S800 distributed I/O system. It provides the mechanical mounting, backplane bus connection, and field wiring terminals for one S800 I/O module (AI/AO/DI/DO/TC/RTD etc.). The “SSP7” suffix typically denotes a specific terminal block configuration, wiring type, or country variant.
Category:
Description
Technical Specifications:
  • System:​ ABB S800 I/O (compatible with all S800 I/O modules — AI801, DI810, DO820, etc.)
  • Mounting:​ 35 mm DIN rail (EN 60715)
  • Bus Interface:​ S800 module bus (ribbon or PCB edge connector to plugged I/O module)
  • Field Wiring Terminals:​ Spring or screw type (model-dependent), accepts 0.2–2.5 mm² wire
  • Voltage Rating (Terminals):​ 250 VAC / 300 VDC max
  • Isolation:​ Between channels and system bus per module type inserted
  • Operating Temp:​ -40 °C to +70 °C (G3 coating available)
  • Dimensions (Typical MTU):​ approx. 112 mm (H) × 108 mm (W) × 65 mm (D) for single-width unit
  • Hot-Swap Support:​ Yes — I/O module can be replaced live when system permits
Features:
  • Clear terminal labeling on front flap
  • Integrated keying to prevent wrong module insertion
  • Supports redundant power and redundant communication when used with appropriate CI8xx interfaces
Installation & Notes:
  • Insert S800 I/O module until it clicks into MTU; tighten fixing screws
  • Use shielded twisted pair for analog signals; ground shield at one end only
  • Verify MTU variant matches module type (e.g., some MTUs are NAMUR-compliant for intrinsically safe modules)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ABB LC100SSP7”

Your email address will not be published. Required fields are marked *

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.