Honeywell CC-TCNT01 - Image 1
Click to enlarge
Honeywell CC-TCF901
Honeywell CC-TCF901
Back to products
Honeywell CC-TDIL01
Honeywell CC-TDIL01

Honeywell CC-TCNT01

Product Brief

Dedicated terminal base providing physical wiring termination for C300 controller redundant communication interfaces, fiber optic links and fieldbus communication circuits; integrates signal isolation, surge protection and impedance matching hardware for controller control network, FOUNDATION Fieldbus and Modbus communication channels, serves as mechanical mating base for C300 control processor communication daughter card.
Category:
Description

Technical Specifications

  • Supported Communication Interfaces: Redundant ControlNet, FOUNDATION Fieldbus H1, Modbus RTU RS485, Fiber Ethernet
  • Terminal Channel Count: 8 multi-purpose communication signal terminal pairs
  • Signal Isolation Rating: 2500 VAC galvanic isolation per communication channel
  • Surge Protection Withstand: 40 VDC transient voltage surge suppression
  • Terminal Screw Torque Requirement: 0.7 N·m tightening torque
  • Supported Wire Gauge: 26 AWG to 16 AWG twisted-pair communication cable
  • Operating Temperature Range: -40 °C to +70 °C
  • Physical Dimensions: 160 mm × 98 mm × 30 mm
  • Net Weight: 0.28 kg

Functional Features

  1. Independent surge suppression circuit for every communication terminal pair
  2. Built-in impedance matching resistors for FOUNDATION Fieldbus H1 bus termination
  3. Galvanic isolation barriers separating controller internal circuits and field communication wiring
  4. Front labeled terminal mapping aligned with C300 controller communication channel addressing
  5. Rear edge connector direct mechanical and electrical mating with C300 controller communication daughter card
  6. DIN rail mounting bracket pre-installed for cabinet rack fixation

Performance Parameters

  • Fieldbus signal transmission bandwidth: 31.25 kbps FOUNDATION Fieldbus H1 standard
  • RS485 Modbus maximum baud rate: 115200 bps
  • Terminal contact resistance: ≤ 12 mΩ per communication channel pair
  • Surge protection response time: <1 ns transient spike suppression

Material Composition

  • Chassis Housing: UL94 V-0 flame retardant PA66 plastic
  • Terminal Hardware: Gold-plated copper contact blocks, nickel-plated steel fastening screws
  • Internal PCB: FR-4 communication-grade circuit board with conformal moisture-resistant coating

Structural Characteristics

  • Standard narrow Series-C IOTA form factor matching IOM module rack height
  • Front exposed screw terminal block for field communication cable termination
  • Rear single edge connector locking onto C300 controller communication daughter card port
  • Integrated DIN rail clip for slide-on rack installation with anti-vibration locking tab

Working Principle

Receives field communication bus signals from external twisted-pair cables via front screw terminals; internal surge suppression circuits filter electrical transients from field wiring; impedance matching and isolation circuits condition communication signals to standard industrial bus voltage levels, then route conditioned signals through rear edge connector to paired C300 controller communication daughter card. Isolation barriers eliminate ground loop interference between controller rack and remote fieldbus instruments.

Advantage Highlights

  1. All field communication wiring terminates on separate terminal base, controller communication daughter card hot-swappable without cable disconnection
  2. Integrated fieldbus termination resistors eliminate external bus terminator hardware
  3. Per-channel surge protection reduces external signal isolator component count
  4. Standardized terminal labeling minimizes field communication wiring configuration errors
  5. Unified terminal base for all C300 controller communication interface types reduces spare part inventory

Applicable Industries

All process control industries deploying Honeywell Experion PKS C300 DCS with FOUNDATION Fieldbus or Modbus field instrumentation: petrochemical, oil & gas, power generation, water treatment, mining

Installation Requirements

  1. Must mate exclusively with C300 controller communication daughter card
  2. Mount on standard 35 mm DIN rail inside Class 1 industrial control cabinet
  3. Field communication cables use dedicated shielded twisted-pair instrument cable, single-point shield grounding at CC-TCNT01 earth lug
  4. Maintain minimum 10 mm horizontal gap between adjacent terminal base units for heat dissipation
  5. IOTA dedicated earth terminal hardwired to cabinet protective earth bus bar

Usage Precautions

  1. Do not apply transient voltage exceeding 40 VDC to any communication terminal pair
  2. Separate high-current power wiring from communication cables connected to CC-TCNT01 terminals
  3. Activate built-in fieldbus termination resistors only at physical bus cable endpoints to avoid signal reflection distortion
  4. Do not over-tighten terminal screws beyond specified torque rating to prevent plastic terminal block cracking
  5. Verify communication bus wiring polarity before controller commissioning to eliminate bus communication failure
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Honeywell CC-TCNT01”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

HONEYWELL 05701-A-0351 Control Card

Technical Specifications:
  • Power Supply: 24VDC
  • Operating Temperature: -40 to 70°C
  • Protection Grade: IP65
  • Dimensions: 96 x 48 x 25 mm
  • Weight: 200g
  • Material: ABS plastic
Read more
Quick view

Honeywell 51195153-902 Pressure Sensor Module

Technical Specifications
  • Model: 51195153-902
  • Brand: Honeywell
  • Origin: United States
  • Pressure Range: ±5 PSI to ±200 PSI (customizable for specific needs)
  • Output Signal: 0-5 V analog voltage or 4-20 mA current loop (configurable)
  • Operating Temperature: -40°C to +125°C
  • Protection Rating: IP67 (dustproof and waterproof)
  • Communication Interface: Supports Modbus RTU and Profinet (industrial Ethernet protocols)
  • Material: Stainless steel 316L housing for compatibility with corrosive media
  • Response Time: 1 ms (typical for dynamic pressure scenarios)
  • Accuracy: ±0.1% FS (full-scale) over the specified range
  • Long-Term Stability: Zero drift ≤0.02% FS/year; span drift ≤0.05% FS/year
Read more
Quick view

Honeywell 51304511-100 NIM Modem Module

Technical Specifications
  • Brand: Honeywell
  • Model: 51304511-100
  • Type: NIM Modem Module
  • Origin: United States
  • Communication Protocols: Supports standard industrial protocols for integration with Honeywell Experion PKS and other automation platforms.
  • Input/Output Channels: Configurable for multi-channel data transmission.
  • Operating Temperature: -40°C to 85°C (industrial-grade range).
  • Protection Rating: IP65 or higher for dust and water resistance.
  • Mounting: Compact design for easy installation in control cabinets or DIN rails.
  • Power Supply: 24 VDC (typical for industrial control systems).
Read more
Quick view

Honeywell CC-IP0101 – Profibus DP Gateway Module Overview

Technical Specifications:

  • Type: IP Communication Module
  • Network Compatibility: Supports Ethernet networks for seamless integration
  • Protocols: Compatible with common building automation protocols such as BACnet/IP, Modbus TCP
  • Power Supply: Operates on standard power supply voltages suitable for building control systems
  • Environmental Conditions: Designed to operate under typical indoor conditions, ensuring reliability in various settings
Read more
Quick view

Honeywell CC-PAIN01 Analog Input Module

Technical Specifications
  • Input Channels: Typically 4 analog input channels (configurable for current/voltage signals).
  • Input Range:
    • Current: -20 mA to 20 mA
    • Voltage: -10 V to 10 V
  • Accuracy: ±0.1% of full-scale range.
  • Resolution: 16-bit analog-to-digital conversion.
  • Communication Interface: RS-485 for seamless integration with process control systems.
  • Power Supply: 24 VDC.
  • Operating Temperature: -40°C to 85°C (wide temperature range for extreme environments).
  • Humidity Tolerance: 0% to 95% non-condensing.
  • Protection Rating: IP67 (dust-tight and waterproof).
  • Dimensions: 100 mm x 60 mm x 30 mm.
  • Weight: 200 g.
Read more
Quick view

HONEYWELL CC-PCNT02 | C300 Controller Module Comprehensive Technical & Application Profile

Technical Specifications:
  • Processor Capability: Equipped with a high-performance processor designed to handle complex algorithms and real-time data processing tasks efficiently.
  • Memory: Offers substantial memory capacity to support extensive data logging, historical data storage, and the execution of sophisticated control strategies.
  • Communication Interfaces: Supports various communication protocols such as Ethernet, Modbus, and proprietary Honeywell protocols, facilitating seamless integration with other systems and devices.
  • I/O Capabilities: Designed to interface with multiple input/output modules, supporting both discrete and analog signals for comprehensive field device control.
Read more
Quick view

Honeywell CC-TAIM01 51305959-175 Low-Level Analog Input Multiplexer Module

Technical Specifications
  • Brand: Honeywell
  • Model: CC-TAIM01
  • Part Number: 51305959-175
  • Input Channels: 8 channels (expandable via cascading)
  • Signal Types: Supports low-level voltage (mV) and current (mA) signals.
  • Input Range: ±150mV (typical for thermocouples/RTDs).
  • Resolution: 16-bit ADC for high-precision measurements.
  • Sampling Rate: Up to 100 samples per second (configurable per channel).
  • Accuracy: ±0.1% full-scale error.
  • Isolation: Channel-to-channel isolation to prevent cross-talk.
  • Communication: Compatible with Honeywell C300 controllers and Experion PKS systems via standard protocols (e.g., Modbus, Ethernet/IP).
  • Power Supply: 24V DC ±10%.
Read more
Quick view

Honeywell FC-SAO-0220M Analog Output Module

Technical Specifications
  • Output Channels: 2 independent analog output channels
  • Signal Type: Supports current (4–20 mA) and voltage (0–10 V DC) outputs
  • Accuracy: ±0.1% of full-scale span
  • Resolution: 16-bit for high-precision control
  • Response Time: ≤10 ms (configurable)
  • Isolation: Channel-to-channel isolation to prevent cross-talk
  • Power Supply: 24 V DC ±10%
  • Operating Temperature: -20°C to +70°C (expandable to -40°C to +85°C with optional variants)
  • Protection Rating: IP20 (standard); IP67 with protective cover
  • Mounting: DIN rail or rack-mounted
  • Communication: Compatible with Honeywell’s proprietary protocols and industrial standards (e.g., Modbus, HART).
Read more
Quick view