Bently Nevada 330103-11-16-10-12-05 Vortex Flow Sensor Probe - Image 1
Bently Nevada 330103-11-16-10-12-05 Vortex Flow Sensor Probe - Image 2
Click to enlarge
Bently Nevada 330103-11-16-10-12-05 Vortex Flow Sensor Probe
Bently Nevada 330103-11-16-10-12-05 Vortex Flow Sensor Probe - Image 2
Bently 330101-00-20-10-02-05 Proximity Probe System Transducer
Bently 330101-00-20-10-02-05 Proximity Probe System Transducer
Back to products
Bently 330104-00-05-10-01-00 Proximity Probe
Bently 330104-00-05-10-01-00 Proximity Probe

Bently Nevada 330103-11-16-10-12-05 Vortex Flow Sensor Probe

Product Overview
The Bently Nevada 330103-11-16-10-12-05 is a high-precision vortex flow sensor probe designed for non-contact measurement of vibration and displacement in rotating machinery. It converts mechanical vibrations and displacements into high-fidelity electrical signals, enabling nanoscale perception and early fault warning for rotating equipment health.

Category:
Description

Technical Specifications

  • Measurement Principle: Utilizes vortex current effects and electromagnetic field modulation to detect mechanical quantities.
  • Frequency Response: 0.5 Hz to 10 kHz, capturing a wide range of vibration frequencies.
  • Sensitivity: 8 mV/μm, ensuring high-resolution detection of minute displacements.
  • Linear Range: 2 mm (typical for 8 mm probes), providing ample measurement range.
  • Temperature Range: Standard probes support -51°C to +177°C; high-temperature models extend up to 350°C.
  • Probe Size: 8 mm diameter, suitable for most general-purpose monitoring scenarios.
  • Output Signal: Converts impedance changes into a DC voltage output ranging from -2V to -18V.

Functional Characteristics

  • Non-Contact Measurement: Eliminates mechanical wear and tear, ensuring long-term stability and reliability.
  • High Precision: Nanoscale displacement resolution (0.1 μm) and linearity better than ±1% full scale.
  • Triple Anti-Interference Design:
    • Hardware: Shielded cables and differential signal transmission minimize electromagnetic noise.
    • Algorithm: Adaptive digital filtering eliminates 50/60 Hz power frequency interference.
    • Structure: Fully sealed stainless steel housing achieves IP67 protection, withstanding high-pressure water jets and chemical corrosion.
  • Self-Diagnostic Capability: Monitors coil impedance to detect probe aging, cable breaks, or excessive gaps, outputting HART alarm signals.
  • Intelligent Integration: Supports real-time frequency spectrum analysis, identifying 12 typical fault features such as unbalance, misalignment, and bearing wear.

Application Scenarios

  • Power Generation: Monitors vibration and displacement in steam turbines, generators, and other large rotating equipment to prevent catastrophic failures.
  • Petrochemical Industry: Detects abnormal vibrations in compressors, pumps, and other high-temperature, high-pressure equipment, ensuring safe operation.
  • Metallurgical Industry: Measures axial displacement in rolling mills and other heavy machinery, preventing collisions between rotating and stationary parts.
  • Mechanical Manufacturing: Provides vibration data for CNC machine tools and other precision equipment, supporting predictive maintenance strategies.

Advantages

  • Military-Grade Reliability: Withstands harsh industrial environments with stable performance.
  • Intelligent Diagnostics: Early fault warning with high accuracy (95%+), reducing unplanned downtime.
  • Universal Compatibility: Supports multiple output protocols (4-20mA + HART, Modbus, PROFIBUS) for seamless integration with DCS/PLC systems.
  • Easy Maintenance: Modular probe design allows quick replacement without disassembling equipment, cutting maintenance time by 80%.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bently Nevada 330103-11-16-10-12-05 Vortex Flow Sensor Probe”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

BENTLY 3500/33 149986-01

Technical Specifications
  • Channels: 16 independent relay outputs.
  • Relay Type: Single-pole double-throw (SPDT) contacts.
  • Electrical Ratings:
    • Max Switching Current: 5 A at 30 VDC or 5 A at 250 VAC.
    • Max Switching Power: 120 W DC or 1250 VA AC.
    • Min Load: 100 mA at 5 VDC (standard contacts); 1 mA at 1 VDC (low-current optional contacts).
Read more
Quick view

Bently Nevada 125840-01 High-Voltage AC Power Input Module (PIM) for 3500 Series Racks

Technical Specifications

  • Manufacturer: Bently Nevada (Baker Hughes)
  • Product Type: High-Voltage AC Power Input Module (PIM)
  • Series Compatibility: 3500 Series Racks
  • Form Factor: Half-height
  • Input Voltage: AC 220V (supports multiple standard power supplies)
  • Output Current: Up to 2A
  • Power Rating: 1000W
  • Operating Temperature Range: -40°C to +85°C
  • Storage Temperature Range: -20°C to +80°C
  • Relative Humidity Compliance: Compliant with IEC 60068 standards
  • Environmental Rating: IP67 (dust and water ingress protection)
  • Dimensions (Width×Height×Depth): 2.54 cm × 12.6 cm × 10.16 cm
  • Weight: 0.5 kg
  • Communication Protocol: Modbus TCP/IP
  • Certifications: ISO 9001, UL, CE, ATEX, IEC 60529 compliant
Read more
Quick view

Bently Nevada 133292-01 3500/15 Low Voltage DC Power Supply Module

Technical Specifications

  • Manufacturer: Bently Nevada
  • Product Type: Low Voltage DC Power Supply Module
  • Series Compatibility: 3500 Series Machinery Protection and Monitoring System (3500/15)
  • Power Requirements & Output:
    • Input voltage: 85 to 264 VAC
    • Output voltage: 20 to 30 VDC (standard output at 24 VDC)
    • Output current: 5 A
    • Power consumption: 5 W
    • Efficiency: 85%
  • Environmental Ratings:
    • Operating temperature: -40 °C to +85 °C
    • Working humidity: 0% to 95%
    • Vibration resistance: Compliant with industrial vibration standards for rack-mounted power modules
Read more
Quick view

Bently Nevada 13677-01 Industrial Signal Conditioning Module

Technical Specifications

    • Input Parameters
      • Input type: Low-level analog signals (voltage, current, or resistance-based sensor inputs)
      • Input channels: 4 differential or 8 single-ended input channels
      • Input range: Configurable for ±5 VDC, ±10 VDC, 0–5 VDC, 4–20 mA, or 10–30 mA
      • Input impedance: ≥ 100 kΩ for voltage inputs; ≤ 10 Ω for current inputs
      • Common-mode rejection ratio (CMRR): ≥ 80 dB at 50/60 Hz (minimizes interference from common-mode signals)
    • Output Parameters
      • Output type: Standardized analog output (4–20 mA DC or 0–10 VDC)
      • Output accuracy: ±0.05% of full scale (at 25 °C ambient temperature)
      • Output resolution: 16-bit (ensures precise signal representation)
      • Output load capacity: Up to 500 Ω for 4–20 mA output; ≥ 10 kΩ for voltage output
    • Electrical Requirements
      • Power supply: 24 VDC ±10% (compatible with standard industrial power systems)
      • Power consumption: ≤ 2.0 W (low energy consumption for continuous operation)
      • Reverse polarity protection: Integrated (prevents module damage from incorrect wiring)
      • EMI/RFI immunity: Complies with IEC 61000-6-2 (industrial environment electromagnetic compatibility standards)
Read more
Quick view

Bently Nevada 21747-045-01 High-Performance Proximitor Probe Extension Cable

Technical Specifications

  • Product Type: Proximitor Probe Extension Cable
  • Core Material: High-grade conductive material with corrosion-resistant coating; high-strength alloy components
  • Cable Length: 4.5 meters (designated by "045" in part number)
  • Armor Protection: Steel armor (designated by "01" in part number)
  • Connector Type: DB9 shielded connector
  • Wire Gauge: 22 AWG
  • Operating Temperature Range: -34 °C to +177 °C (-29 °F to +351 °F)
  • Environmental Protection Rating: IP67 (dust-tight and water-resistant)
  • Electrical Rating: 24 V DC
  • Operating Frequency: Up to 1 MHz
  • Insulation Resistance: ≥ 100 MΩ @ 500 VDC
  • Signal Output: 200 mV/mil
  • Measurement Range Compatibility: 0 - 80 mils (0 - 2 mm)
  • Accuracy: ± 4% calibrated
  • Dimensions: 300 × 300 × 60 mm
  • Weight: 0.59 kg
  • Country of Origin: USA
Read more
Quick view

BENTLY NEVADA 3500/15 133292-01 LOW-VOLTAGE DC POWER MODULE

Technical Specifications:
  • Input Channels: Supports multiple input channels for connecting proximity probes, velocity sensors, and accelerometers, allowing comprehensive monitoring of machinery vibration and position.
  • Communication Interfaces: Equipped with standard communication interfaces such as Modbus/TCP or Ethernet, facilitating integration with distributed control systems (DCS) and other plant management networks.
  • Processor Capability: Features robust processing capabilities to handle real-time data acquisition, analysis, and alarming functions efficiently.
  • Power Supply: Operates on a specific voltage range suitable for industrial environments, with options for redundant power supplies to ensure uninterrupted operation.
  • Environmental Tolerance: Designed to withstand harsh industrial conditions, including resistance to temperature extremes, humidity, and electromagnetic interference.
Read more
Quick view

Bently Nevada 60M500-05-00 vbOnline Pro Condition Monitoring System

Technical Specifications

  • Electrical Parameters
    • Minimum input power: 18 VDC
    • Maximum input power: 36 VDC
    • Maximum current: 1.7 A
    • Maximum inrush current: 2.7 A (less than 5 ms)
    • Dynamic range: 110 dB @ fs = 102.4 ksps
    • Signal/noise ratio: 110 dB @ fs = 102.4 ksps
    • A/D conversion: 24-bit sigma-delta
    • Bandwidth: 0 to 40 kHz
    • Output signal: 0-5 V
    • Supported protocols: Bently Nevada proprietary protocol, Modicon Modbus, Modbus/TCP
    • Communication interfaces: Ethernet TCP/IP, serial (RS 232/RS 422/RS 485)
Read more
Quick view

Bently Nevada 9200-06-01-10-00 Vibration Transmitter

Technical Specifications

  • Input Parameters
    • Input type: Accepts signals from piezoelectric accelerometers or velocity sensors
    • Input range: Configurable for acceleration (0–500 m/s²), velocity (0–50 mm/s), or displacement (0–1000 μm)
    • Frequency response: 0.5 Hz to 10,000 Hz (covers most industrial rotating machinery needs)
    • Input impedance: ≥ 10 MΩ (ensures minimal signal loss from sensors)
  • Output Parameters
    • Output type: 4–20 mA DC current loop (standard industrial output)
    • Output accuracy: ±0.1% of full scale (at 25 °C ambient temperature)
    • Output load: Up to 750 Ω (compatible with most DCS/PLC input modules)
    • Additional output: Optional relay output (for alarm triggering, based on configuration)
Read more
Quick view