Show sidebar
Show 9 12 18 24

ABB AC900F PM904F

  • Processor Type: PowerQUICC II Pro
  • CPU Clock Frequency: 800 MHz
  • Controller Memory: 48 MB (16 MB battery - buffered SRAM, 32 MB DRAM)
  • Communication Interfaces: 4 Ethernet interfaces, 2 serial interfaces
  • Supported Protocols: Ethernet - based protocols like Modbus TCP, IEC 60870 - 5 - 104; serial interface protocols such as Modbus RTU/ASCII, IEC 60870 - 5 - 101
  • I/O Points: Supports up to 1500 I/O points
  • Redundancy: Yes
  • Switching Time: 500 ms
  • Operating Temperature: -20°C ~ +70°C
  • Storage Temperature: -40°C ~ +85°C
  • Dimensions: 285 mm x 152 mm x 95 mm
Read more
Quick view

ABB ACU-01B 3HNA024871-001 — Axis Control Module

Procurement & Compatibility Notes

  • Valid Part Suffixes: ACU-01B 3HNA024871-001/03 (full industrial variant) .
  • Incompatible Claims:
    • "PLC for oil/gas" → Refers to ABB AC500 series (e.g., PM865 processor) .
    • "100W power module" → Matches ABB UFC760BE142 specs .
  • Warranty: 12 months for factory-sealed units .
Read more
Quick view

ABB AFC094AE02 HIEE200130R0002

Technical Specifications

  • Supported Communication Protocols:
    • Primary protocols: Profibus-DP (slave mode), Modbus RTU (master/slave modes), and Ethernet/IP (adapter mode)
    • Supplementary protocol: ABB proprietary SPA (Serial Peripheral Access) bus for internal system communication
  • Communication Ports:
    • 1 x Profibus-DP port (RS-485 physical layer, baud rate up to 12 Mbps)
    • 1 x Modbus RTU port (RS-485 physical layer, baud rate range: 9600 bps to 115200 bps)
    • 1 x Ethernet/IP port (RJ45 connector, 10/100 Mbps adaptive, full/half-duplex mode)
  • Data Transfer Capacity:
    • Maximum data exchange rate: 100 Mbps (via Ethernet/IP port)
    • Profibus-DP: Up to 244 bytes of input data and 244 bytes of output data per communication cycle
    • Modbus RTU: Supports up to 1000 registers (32-bit or 16-bit) for read/write operations
Read more
Quick view

ABB AFC094AE02 HIEE200130R0002 Industrial Programmable Controller Module

Based on comprehensive analysis of ABB technical documentation and verified sources, the ABB AFC094AE02 is a multi-functional industrial module primarily serving as an ARCnet Control Panel, with significant contradictions in technical descriptions across sources. Below is a consolidated technical profile validated against manufacturer-aligned data:
Read more
Quick view

ABB AFP9075355 – UNITROL 1020 Digital Excitation System

Technical Specifications:
  • It forms part of the UNITROL family, known for providing reliable and efficient control of generator excitation.
  • This system supports various voltage regulation methods ensuring compatibility with different types of generators and operational needs.
  • Capable of handling a wide range of input signals to accurately monitor and adjust generator output.
Read more
Quick view

ABB AIM0006 2RCA021397A0001F Communication Module (800M Control System Series)

  • Electrical Parameters
    • Power supply voltage: 24V DC
    • Power consumption: About 2W
    • Load capacity: Up to 10 amps per channel
  • Communication Parameters
    • Communication protocols: Modbus RTU, Profibus DP, CANopen
    • Baud rate: Up to 12 Mbps
    • Interfaces: RS-485, RJ45; some models also support USB and Ethernet
  • Environmental Parameters
    • Operating temperature: -25°C to 70°C
    • Storage temperature: -40°C to 85°C
    • Vibration resistance: 0.5g RMS (57Hz to 250Hz)
  • Physical Parameters
    • Weight: About 0.5kg
Read more
Quick view

ABB AO2000 LS25 Analog Output Module

Technical Specifications
  • Channel Quantity: 25 channels
  • Output Type: Voltage and current
  • Output Range: Voltage: ±10V, ±5V, ±2.5V, ±1V; Current: ±20mA, ±10mA, ±5mA, ±2mA
  • Resolution: 16 - bit
  • Accuracy: ±0.1%
  • Power Supply Voltage: 9 - 32V DC
  • Rated Output Load: 0 - 600Ω
  • Linearity Error: ≤0.2%
  • Stability Error: ≤0.1% F.S./24h
Read more
Quick view

ABB AO2000 LS25 Laser Gas Analyzer – Comprehensive Technical Profile

Technical Specifications:
  • Measurement Technology: Utilizes advanced optical or electrochemical technologies depending on the specific gas being measured.
  • Gas Types: Capable of measuring a wide range of gases including but not limited to CO, CO2, NO, NOx, SO2, O2, and hydrocarbons.
  • Measurement Range: Offers versatile measurement ranges tailored to the application requirements, ensuring accurate readings from ppm to percentage levels.
  • Accuracy: High accuracy with minimal drift over time, contributing to reliable long-term performance without frequent recalibrations.
  • Response Time: Fast response times allowing for real-time monitoring and quick reaction to changes in gas concentration.
  • Environmental Tolerance: Designed to withstand challenging industrial conditions, including resistance to dust, moisture, temperature extremes, and corrosive atmospheres.
  • Outputs and Interfaces: Equipped with standard analog outputs (4-20mA) and digital communication interfaces such as Modbus, Profibus, or Ethernet for seamless integration into existing control systems.
  • Power Supply Requirements: Operates on standard industrial power supplies, with options for redundant configurations to ensure uninterrupted operation.
Read more
Quick view

ABB AO2000-LS25

Technical Specifications:
  • Modular design allowing for up to four analyzer modules in one system with the capability to measure up to six different sample components.
  • High-performance measurement technology ensuring accurate readings without the need for calibration gas cylinders.
  • Quick response time of less than 1 second.
  • Measurement accuracy within ±1%.
  • Operating temperature range from -20°C to +50°C.
  • Power consumption rated at 100W.
  • Dimensions of approximately 233.4 mm x 160 mm x 41 mm and weight of about 2.5 kg.
Read more
Quick view

ABB AO810V2 Analog Output Module

Technical Specifications

  • Number of Channels: 8
  • Output Signal: 0 (4) … 20 mA, 10 V positive or negative
  • Resolution: 16 - bit
  • Accuracy: ±0.1%
  • Load Resistance: 500 / 850 ohms
  • Operating Temperature: - 25 °C to +60 °C
  • Storage Temperature: - 20 °C to +80 °C
  • Humidity: 95%
  • Dimensions: 45 mm x 102 mm x 119 mm or 127 mm x 96 mm x 22 mm
  • Weight: 0.18 kg or 0.2 kg
  • Power Supply: DC 24V
  • Protection Level: IP20
Read more
Quick view

ABB AW600068（NAVIGATOR 600）Navigation Controller

Technical Specifications

  • Processor: 32 - bit RISC processor with a clock speed of 800 MHz
  • Memory: 512 MB DDR3 SDRAM (for program execution and data processing); 256 MB Flash memory (for firmware storage and configuration data)
  • Operating Voltage: 24 V DC (nominal); Voltage range: 18 V DC - 32 V DC
  • Power Consumption: Maximum 15 W under full load conditions
  • Operating Temperature: - 10°C to +55°C (ambient temperature, no forced cooling required)
  • Storage Temperature: - 40°C to +85°C (for long - term storage without operational stress)
  • Humidity Resistance: 5% - 95% relative humidity (non - condensing)
  • Protection Level: IP20 (front panel); IP40 (when installed in a closed control cabinet)
Read more
Quick view

ABB AZ20 112112221112E STD Combustion Gas Oxygen Analyzer

  • Measurement Parameters
    • Measurement range: 0-25% O2.
    • Accuracy: ±0.2%.
    • Response time: Less than 10 seconds.
  • Electrical Parameters
    • Power supply voltage: 24V DC.
    • Communication interface: RS485 Modbus.
  • Environmental Parameters
    • Operating temperature: -20°C to 50°C.
    • Protection level: IP65.
  • Mechanical Parameters
    • Probe insertion length: 0.5 to 4.0 meters.
    • High temperature resistance: Up to 800°C.
    • Dimensions: Net width 120mm, net height 60mm, net depth 135mm.
Read more
Quick view