Show sidebar
Show 9 12 18 24

Vibro-Meter IOC4T 200-560-000-016

Product Name:​ VM600 Series Input/Output Conditioning Card (IOC4T)
Product Introduction:​ Signal conditioning and interface I/O card for the VM600 machinery protection system; works in pair with MPC4 dynamic protection cards to acquire dynamic vibration signals and tachometer signals from proximity probes, accelerometers, and speed sensors.
Read more
Quick view

Vibro-Meter IOC4T 200-560-000-1130

Product Name: VM600 IOC4T Input/Output Interface Card
Product Introduction: The Vibro-Meter IOC4T​ (part of Meggitt VM600 machinery protection system) is a signal interface card​ that pairs with the MPC4 protection card​ to provide field wiring termination, analog outputs, relay alarms, and buffered raw signal access for vibration/tachometry monitoring.
Read more
Quick view

Vibro-Meter IOCN 200-566-000-113

  • Product Name: VM600 Series I/O Communication Interface Card (CIC)
  • Product Introduction: A communication gateway module within the Meggitt (formerly Vibro-Meter) VM600 Machinery Protection System (MPS) and Condition Monitoring System (CMS). It bridges field-level vibration/temperature data with higher-level control systems like DCS or SCADA.
Read more
Quick view

Vibro-Meter IOCT16T

  • Product Name: VM600 Series Intelligent Front-End Data Acquisition Unit (DAU)
  • Product Introduction: A high-performance signal conditioning and data acquisition module designed for VM600 CMS, capable of processing complex dynamic signals from rotating machinery sensors.
Read more
Quick view

Vibro-Meter IPC704 244-704-000-042

  • Product Name: Vibration Signal Conditioner / Charge Amplifier
  • Product Introduction: A two-wire or three-wire signal converter designed to interface piezoelectric accelerometers (CA series) and dynamic pressure sensors (CP series) with VM600 monitoring cards or third-party DCS.
Read more
Quick view

Vibro-Meter MPC4 VM600 200-510-076-114

Product Brief:​ The MPC4 is a plug-in 6U Eurocard that acquires up to four dynamic (AC) signals from vibration/position sensors (accelerometers, velocity pickups, eddy-current probes) plus two tacho/keyphasor inputs. It performs digital filtering (high-pass / low-pass / band-pass, 6–60 dB/octave, software-configurable), integration/differentiation, true RMS / peak / peak-peak calculation, order tracking, and compares against programmable Alert/Danger setpoints. Communicates with VM600 IOC4T/IOT modules via backplane for alarm relays, analog outputs, and host communication. Fully compliant with API 670.
Read more
Quick view

Vibro-Meter RPS6U 200-582-500-013

  • Part Number:​ 200-582-500-013 (RPS6U PSU / rack assembly)
  • Function / Working Principle:​ Houses up to 6 Vibro-Meter signal conditioner / monitor cards (e.g. IOC4T, MPC4, AMC8) and provides regulated DC power (+5 V / ±12 V / +24 V depending on backplane) plus system alarm relays and bus communication to host machinery protection system (VM600 IPC / VIBRO-RACK).
Read more
Quick view

Vibro-Meter SIM-275A 200-582-500-013

Technical Specifications
  • Input Voltage: Supports redundant power inputs for enhanced reliability.
  • Output Voltage: Delivers stable 24 VDC to downstream modules.
  • Power Capacity: Designed to handle the electrical demands of multiple monitoring units simultaneously.
  • Operating Temperature: -10°C to +40°C (14°F to 104°F).
  • Storage Temperature: -20°C to +85°C (-4°F to 185°F).
  • Dimensions: Compact form factor for integration into standard VM600 racks.
  • Weight: Lightweight yet robust construction for ease of installation.
Read more
Quick view

Vibro-Meter VC-920

Manufacturer:​ Brüel & Kjær Vibro (formerly Vibro-Meter / Schenck)
Product Brief:​ A compact, DIN-rail or panel-mountable single-channel vibration monitor for bearing housing and casing vibration, accepting acceleration or velocity sensor inputs and providing alarm relays, analog output, and buffered dynamic signal.
Read more
Quick view

Vibro-Meter VM-3024H

Product Overview
The VM-3024H is a high-reliability DC power supply module designed for Vibro-Meter's vintage VM-3 or VM600 racks, providing stabilized 24 V DC to power transducer electronics, signal conditioners, and system modules. Often used in redundant pairs for continuous availability.
Read more
Quick view

Vibro-Meter VM-701BNB1TRPTB1

Product Overview
The VM-701 (and variants such as BNB1TRPTB1) is typically a VM600 rack power supply unit (RPS6U type) or a combined CPU/Communications module designation within the VM600 family. The RPS6U supplies regulated +24 V DC and ±15 V / +5 V to the VM600 backplane. When specified as a CPU variant (CPUM + IOCN pair), it provides rack management, Ethernet/serial communications, and data buffering.
Read more
Quick view

Vibro-Meter VM-742B1-1

Product Overview
The VM-742 series is a 2-wire loop-powered vibration/temperature transmitter compatible with Vibro-Meter's sensor portfolio (typically IEPE accelerometers or velocity pickups). It conditions the dynamic signal and outputs a proportional 4–20 mA current representing overall vibration (RMS or peak) for direct connection to a DCS or PLC. Often used in API 670-compliant machinery health monitoring where a full rack system is not required.
Read more
Quick view