Show sidebar
Show 9 12 18 24

Triconex 5382

Technical Specifications:
  • Type: Communication Module
  • Voltage Range: 16-30 VDC (maximum 36 VDC)
  • Voltage Drop: <1.5 VDC (typical)
  • Power Module Load: <10 watts
  • Current Rating: Up to 0.7A per point, with a maximum surge of 4.8A per 10 milliseconds
  • Minimum Load Requirement: 30mA
  • Maximum Load Leakage: 4mA
  • Isolation: 1500 VDC point isolation
  • Diagnostic Indicators: Each point's on/off status, module status (pass, fault, active), field alarm power, and load (one per point)
  • Color Code: Emerald green
  • Manufacturer: TRICONEX, USA
Read more
Quick view

Triconex 5401S2 Analog Input/Output Module

Technical Specifications:
  • Type: Analog Input/Output Module
  • Architecture: Triple Modular Redundant (TMR) for enhanced fault tolerance and system reliability.
  • Input/Output Signals: Supports a variety of analog input and output signals, including 4-20mA current signals and 0-10V voltage signals.
  • Precision: High-precision analog signal conversion technology ensures accurate input/output signals for control devices.
  • Communication: Each chassis has six RS-485 IO expansion bus interfaces in the upper left corner of the backplane. Channels A, B, and C have two sets of ports that provide two triple serial communication paths between the chassis. The triple IO bus transfers data between the IO module and the main processor at a speed of 375 kilobits per second, while the communication bus runs at 2 megabits per second between the main processor and the communication module.
Read more
Quick view

Triconex 5481 Isolated Analog Input TriPak 1

Technical Specifications:
  • Input Types: Voltage, current, temperature, resistance
  • Input Ranges:
    • Voltage: 0-10V
    • Current: 0-20mA
    • Temperature: -100°C to +400°C
    • Resistance: 0-100Ω
  • Accuracy: 0.1%
  • Resolution: 16-bit
  • Isolation Voltage: 1500 Vrms
  • Response Time: 1 millisecond
  • Operating Temperature: -40°C to +70°C
  • Dimensions: 176 mm x 102 mm x 25 mm
Read more
Quick view

Triconex 7400166-390 External Control Board Termination Component

Product Introduction: The Triconex 7400166-390 is an external control board termination component designed for use within the Triconex safety instrumented system (SIS). It serves as a critical interface for connecting external control boards to the SIS, ensuring reliable signal transmission and system integrity. This component is engineered to meet the stringent requirements of industrial safety applications, providing high reliability and fault tolerance.
Read more
Quick view

Triconex 7400212-100

Technical Specifications:
  • Architecture: Triple Modular Redundant (TMR) design for enhanced fault tolerance and system availability.
  • Safety Integrity Level (SIL): Certified for SIL 3 applications, ensuring compliance with international safety standards.
  • Processing Capability: Equipped with powerful processing capabilities to rapidly respond to control demands.
  • Programmability: Highly programmable and flexible, allowing users to customize configurations and programming to suit specific application needs.
  • Communication Capability: Outstanding communication capabilities for seamless integration with other devices and systems, enabling real-time data transmission and sharing.
Read more
Quick view

Triconex 8110 High Density Triple Modular Redundancy Main Chassis

Technical Specifications
    • Electrical Parameters
      • The input voltage range covers 10.5V to 30V RMS, and the output voltage range is 0V to 10V RMS. The maximum output current reaches 24 amperes, and the maximum working frequency is 2500 Hz, with a control accuracy of ±1%.
      • The power consumption is optimized for energy efficiency. The galvanic isolation design is adopted, and the isolation voltage meets industrial anti-interference standards, which can effectively reduce the impact of electrical noise on the system.
    • Physical Parameters
      • There are differences in dimensions and weight among different versions. One common version has dimensions of approximately 15.9 cm × 14.7 cm × 8.1 cm and weighs about 1.13 kilograms. Another version has dimensions of 16 cm × 16 cm × 12 cm and a weight of 0.8 kilograms, and there is also a model weighing 1.36 kilograms, which is compact and convenient for installation in standard control cabinets.
Read more
Quick view

Triconex 8111 Expansion Chassis

Technical Specifications:
  • I/O Capacity: Supports up to 128 I/O channels, allowing for extensive system expansion.
  • Hot-Swappable Modules: Modules can be added or removed without shutting down the system, improving maintenance efficiency.
  • Redundant Power Supplies: Built-in redundant power supplies ensure continuous operation even in the event of a power supply failure.
  • Compatibility: Fully compatible with all Triconex controllers and TriconView software for seamless integration and configuration.
  • Operating Temperature: Typically operates within a temperature range of -40°C to +70°C, ensuring reliable performance in extreme conditions.
  • Enclosure: Features a sealed NMA4X aluminum enclosure that provides protection against harsh environmental conditions, including dust and moisture.
Read more
Quick view

Triconex 8120E

Technical Specifications:
  • Operating Temperature: -20°C to +60°C (-4°F to +140°F)
  • Storage Temperature (Non-operational): -20°C to +65°C (-4°F to +158°F)
  • Relative Humidity: Up to 95% (non-condensing)
  • Vibration Resistance: 0.04 G²/Hz, 1.04 Grms, 10 to 500 Hz
  • Input/Output Support: Compatible with various modules, including digital input modules and external terminal modules, for receiving and transmitting analog and digital signals.
  • Communication Capabilities: Supports multiple communication protocols, including MODBUS slave/master, Tristation, TSAA (including DDE, OPC), and point-to-point communication protocols.
  • Certifications: Meets TUV AK6, NFPA72, FM, CSA, and other safety and reliability standards.
Read more
Quick view

TRICONEX 8301A Communication Module

Technical Specifications
  • Model: 8301A
  • Manufacturer: TRICONEX (a brand of Schneider Electric)
  • Function: Communication module for connecting I/O modules to the TRICONEX controller
  • Input/Output Types: Supports digital input and output signals
  • Redundancy: Part of the TRICONEX TMR (Triple Modular Redundant) architecture, ensuring fault tolerance and high availability
  • Voltage Range: Typically operates within a standard industrial voltage range, compatible with 24VDC systems
  • Environmental Conditions: Designed to withstand harsh industrial environments, including extreme temperatures and vibrations
  • Mounting: Rack-mounted for easy integration into existing control systems
  • Diagnostic Capabilities: Includes built-in diagnostic features for monitoring module status and troubleshooting issues
Read more
Quick view

Triconex 8305A

Technical Specifications:
  • Architecture: Triple Modular Redundancy (TMR) with three independent processors, each with its own memory and bus interface.
  • Processor: Each processor has 2MB RAM and 2MB flash memory.
  • Input/Output Modules: Supports a variety of I/O modules, including digital input, analog input, digital output, and analog output modules.
  • Communication Protocols: Supports multiple communication protocols, including Modbus, OPC, and Ethernet/IP, enabling seamless integration with other devices and systems.
  • Power Requirements: 100-240VAC, 50/60Hz, with a maximum power consumption of 350W.
  • Operating Temperature Range: 0℃ to 60℃.
  • Safety Integrity Level: Complies with SIL 3 (Safety Integrity Level 3) certification standards, ensuring high safety and reliability.
Read more
Quick view

Triconex 8307A Power Supply Module

Product Introduction: The Triconex 8307A is a power supply module designed for use within the Tricon triple modular redundant (TMR) safety control system. It provides reliable and stable power to the Tricon system, ensuring continuous operation even in harsh industrial environments. The module is part of the Triconex family of safety instrumented systems (SIS), known for their high reliability and fault tolerance.
Read more
Quick view

Triconex 8310

Technical Specifications:
  • Power Module Specifications:
    • Input Voltage: 95–180 VAC or 95–180 VDC
    • Output Voltage: 24 VDC
    • Input Current: 150 mA
    • Output Current: 1 A
    • Fuse Rating and Type: 5 Amps, time-delay
    • Weight: Approximately 3.8 kg (shipping weight: 7 kg)
    • Power Consumption: 175 Watts
    • Operating Temperature Range: -40°C to 70°C
Read more
Quick view