Shop

Technical Specifications

• Number of Channels: 40
• Output Range: 4 - 20 mA
• Accuracy: ±0.1% of full scale
• Linearity: ±0.2% of full scale
• Noise: <0.1% of full scale
• Response Time: <250 ms
• Operating Temperature Range: - 40°C to 85°C
• Power Supply Voltage: 24 VDC
• Power Consumption: <10 W
• Dimensions: 2.2 x 12.4 x 12.6 cm
• Weight: 0.1 kg

• Input Channels: 32 digital input channels for receiving switch-type signals from field devices (e.g., buttons, relays, limit switches).
• Voltage Range: 24 V DC (operating voltage).
• Current Range: 2 A per channel.
• Response Time: Less than 2 milliseconds for rapid signal capture.
• Accuracy: ±0.1% for precise measurement.
• Isolation Voltage: 250 V RMS (channel-to-ground isolation).
• Surge Voltage: 4 kV for protection against electrical surges.
• Noise Suppression: 500 V/μs to minimize interference.

• Input Channels: 40 analogue channels, supporting simultaneous connection of multiple sensors (e.g., temperature, pressure, flow).
• Signal Conversion: Converts analogue signals (voltage/current) into digital data for transmission to control systems via industrial protocols like Modbus or Profibus.
• Input Range: Compatible with a wide range of sensor outputs, including 0-10V and 4-20mA signals.
• Resolution: Features 16-bit ADC (Analog-to-Digital Converter) for high-precision capture of minute signal variations.
• Sampling Rate: Short sampling cycles to meet real-time control demands.
• Redundancy: Certain models support redundant configurations to enhance system availability and prevent data loss from single-point failures.
• Isolation: Electrical isolation technology minimizes electromagnetic interference (EMI) for accurate data transmission.

• Channels: 40 digital input/output channels (configurable for either input or output).
• Voltage Range:
  • Operating voltage: 24 V DC (standard); supports up to 60 V DC via external power distribution units.
  • Field terminal wire size: 12 AWG to 28 AWG.
• Current Rating:
  • Maximum current per channel: 2 A.
  • Power dissipation: 0.5 W per power group.
• Isolation:
  • Channel-to-channel isolation: 50 V reinforced (continuous), tested at 1411 V DC for 60 seconds.
  • Power group-to-power group isolation: 250 V basic (fault), tested at 2436 V DC for 60 seconds.

Technical Specifications

1. License & Software Specifications
   • License Model: 5‑user concurrent access; unlimited AADvance controller support
   • Software Compatibility: AADvance Workbench (Release 1.20.518 and later; Software Identity: 354130)
   • Programming Standards: IEC 61131‑3 (LD, FBD, ST, IL, SFC); IEC 61499 distributed function blocks
   • Safety Compliance: Supports IEC 61508 SIL 2/SIL 3 AADvance controller applications
   • Validation Method: Hardware‑bound USB key (no network license server required)
   • User Access: Concurrent logins for up to 5 engineers; role‑based permissions configurable via Workbench
2. Hardware & Physical Specifications
   • Form Factor: USB 2.0 hardware key (plug‑and‑play)
   • Dimensions (H×W×D): 22 mm × 124 mm × 126 mm (0.87 in × 4.88 in × 4.96 in)
   • Weight: 0.1 kg (0.22 lb)
   • Enclosure: Rugged plastic casing (IP50 dust protection)
   • Interface: USB 2.0 (backward‑compatible with USB 1.1/3.0 ports)
   • Durability: 10,000+ insertion cycles; operating temperature range for key: 0°C to +60°C (32°F to 140°F)

• Processor Architecture: Triple-redundant design with three independent processor modules.
• Input Voltage: 24 V DC.
• Operating Temperature: -40 °C to +70 °C.
• Storage Temperature: -25 °C to +70 °C.
• Humidity: 10% to 95% non-condensing.
• Communication Protocols: Supports Modbus TCP/IP, EtherNet/IP, Profinet, and other industrial protocols.
• Dimensions: 100 mm × 120 mm × 30 mm.
• Weight: Approximately 1.5 kg (depending on configuration).
• Memory: Variable binding memory increased from 64K to 128K for enhanced data handling.
• Redundancy: Redundant power supplies, communication interfaces, and I/O modules.