Bently 126615-01 Proximitor® I/O Module
Product Overview
The Bently 126615-01 is an I/O module designed for use with Bently Nevada's 3500 series machinery protection and condition monitoring systems. It serves as an interface between the displacement sensors and the monitoring system, receiving signals from the sensors and converting them into a format that can be processed by the monitoring system. This module is essential for accurate measurement and analysis of vibration and displacement in rotating machinery.
Bently 99005-50-01-00 System Module Controller
Product Overview
The Bently 99005-50-01-00 is a system module controller designed for integration into Bently Nevada's machinery protection and condition monitoring systems. It serves as a critical component in managing and processing signals from various sensors, such as vibration probes, speed sensors, and displacement transducers, to ensure the safe and efficient operation of rotating machinery.
Bently 33103-00-04-10-02-00 Proximity Probe
Product Overview
The Bently 33103-00-04-10-02-00 is a high-precision proximity probe designed for non-contact vibration and displacement measurement in rotating machinery. It is part of the Bently Nevada 3300 series, which is widely used in the monitoring and protection of critical equipment such as turbines, compressors, pumps, and motors. The probe converts the gap between the probe tip and the observed target into a proportional voltage signal, enabling precise measurement of static and dynamic distances.
Bently 18745-04 Proximitor Sensor
Product Overview
The Bently 18745-04 is a proximitor sensor designed for non-contact vibration and displacement measurement in rotating machinery. It is part of the Bently Nevada 3300 series, which is widely used in the monitoring and protection of critical equipment such as turbines, compressors, pumps, and motors. The sensor converts the gap between the probe tip and the observed target into a proportional voltage signal, enabling precise measurement of static and dynamic distances.
Bently 133323-01 Modbus Communication Gateway Module
Product Overview
The Bently 133323-01 is a Modbus communication gateway module designed for the Bently Nevada 3500 system. It facilitates the integration of monitoring data from the 3500 system into process control systems (DCS, PLC, etc.) by enabling data transmission through Modbus RTU (serial) and Modbus/TCP (Ethernet) protocols. This module plays a crucial role in enhancing the interoperability of the 3500 system with various automation systems, ensuring seamless data exchange and real-time monitoring.
Bently 990-10-XX-03-00 Vibration Transmitter
Product Overview
The Bently 990-10-XX-03-00 is a vibration transmitter designed for monitoring the vibration of rotating machinery, such as centrifugal air compressors, small pumps, motors, and fans. It converts vibration signals into proportional 4-20 mA current signals, which can be directly input into mechanical control systems for real-time monitoring and protection.
Technical Specifications
- Input Signal: Accepts input from a single non-contact 3300 NSV proximity probe and its matching extension cable.
Bently 990-04-50-01-00 Vibration Transmitter
Product Overview
The Bently 990-04-50-01-00 is a vibration transmitter designed primarily for monitoring the vibration of rotating machinery such as centrifugal air compressors, small pumps, motors, and fans. It converts vibration signals into proportional 4-20 mA current signals, which can be directly input into mechanical control systems for real-time monitoring and protection.
Technical Specifications
- Input Signal: Accepts input from a single non-contact 3300 NSV proximity probe and its matching extension cable.
Bently 330105-02-12-10-02-05 8mm Reverse Mount Proximity Probe
Product Overview
The Bently 330105-02-12-10-02-05 is an 8mm reverse mount proximity probe designed for the Bently Nevada 3300 XL series vibration monitoring system. It measures the gap between the probe tip and observed conductive surfaces, converting this distance into a proportional voltage output. This enables real-time monitoring of static (position) and dynamic (vibration) parameters in rotating machinery, supporting predictive maintenance and fault prevention.
Bently 3500/91M EGD Communication Gateway Module
Product Overview
The Bently 3500/91M is an Ethernet Global Data (EGD) communication gateway module designed for the Bently Nevada 3500 series mechanical protection and condition monitoring system. It facilitates seamless integration between the 3500 monitoring system and external control systems, enabling real-time data exchange and centralized monitoring. This module is critical for industries relying on rotating machinery, ensuring efficient and reliable operation through advanced communication capabilities.
Bently 3500/70-01-01 Channel Relay Module
Product Overview
The Bently 3500/70-01-01 is a high-performance channel relay module designed for the Bently Nevada 3500 series mechanical protection and condition monitoring system. It provides relay output functionality to transmit detected abnormal situations to control systems or alarm systems, ensuring safe and reliable operation of rotating machinery.
Bently 3500/22-01-01-00 Transient Data Interface (TDI) Module
Product Overview
The Bently 3500/22-01-01-00 is a transient data interface module designed for the Bently Nevada 3500 monitoring system. It serves as a bridge between the 3500 monitoring framework and compatible software, such as System 1 Condition Monitoring and Diagnostic Software. The TDI module combines the functions of the 3500/20 Rack Interface Module (RIM) and a communication processor, enabling continuous collection of steady-state and transient waveform data from M-series monitors (e.g., 3500/40M, 3500/42M). This data is transmitted to host software via Ethernet for real-time analysis and monitoring.
Bently 330907-A05-B30C05-D02-ECN Eddy Current Proximity Probe
Product Overview
The Bently 330907-A05-B30C05-D02-ECN is a high-performance eddy current proximity probe designed for non-contact measurement of vibration, displacement, and position in rotating machinery. It operates on the principle of electromagnetic induction, generating a high-frequency magnetic field that interacts with the target surface to produce eddy currents. Changes in the gap between the probe and target alter the impedance of the probe's coil, which is converted into a voltage signal proportional to the displacement.
