Shop - Page 194 of 326 - qzmro Automation

Showing 2317–2328 of 3912 results

Show sidebar

Show 9 12 18 24

Clear filters

GE IC670ALG310-JA Analog Input Module

Technical Specifications

Input Channels: 8 single-ended analog input channels
Input Signal Types: Supports 0-20 mA, 4-20 mA, 0-5 VDC, 1-5 VDC, and ±10 VDC signals
Resolution: 12-bit analog-to-digital conversion for precise signal representation
Conversion Time: 100 microseconds per channel (typical)
Input Impedance:
- Current inputs: 250 ohms
- Voltage inputs: 10 megohms

Quick view

GE IC670CHS002 I/O Terminal Module

Technical Specifications

Terminal Count: 37 terminals
Supported Modules: Can accommodate two field control modules
Installation Method: Supports DIN rail or panel mounting, designed for horizontal installation
Wire Specifications: Each terminal can accommodate two solid or stranded copper wires ranging from AWG #14 (2.1 mm²) to AWG #22 (0.35 mm²)
Operating Temperature: 0°C to 60°C
Storage Temperature: -40°C to 85°C

Quick view

GE IC670GBI002 Field Control Genius Bus Interface Unit

Product Overview The GE IC670GBI002 is a Genius Bus Interface Unit (BIU), a core component of the GE Fanuc Field Control distributed I/O system. It functions as the intelligent "head module" for an I/O station, interfacing up to eight Field Control I/O modules with a host PLC or computer over a Genius serial bus. The unit is responsible for scanning I/O modules, processing data, handling datagram communications, and performing diagnostic tests, all within a rugged aluminum housing designed for DIN rail mounting.

Quick view

GE IC670GBI002H Field Control Bus Interface Unit

Product Introduction The IC670GBI002H is a Bus Interface Unit designed as part of the GE Fanuc Field Control series. It functions as the primary communication and control head for a remote I/O station, managing the data exchange between a host controller and up to eight locally mounted Field I/O modules across a Genius Bus network .

Technical Specifications Product Type: Bus Interface Unit

Quick view

GE IC670GBI102D Genius Bus Interface Unit

The GE IC670GBI102D is a Genius Bus Interface Unit (BIU), a core component of the GE Fanuc Field Control distributed I/O system. It functions as the intelligent communication gateway for an I/O station, interfacing up to eight Field Control I/O modules with a host PLC or computer over a Genius serial bus . The unit scans connected I/O modules, processes data, manages Genius datagram communications, performs diagnostic tests, and reports status to the host or a connected handheld monitor. Its aluminum housing is designed for standard DIN rail mounting in industrial environments .

Quick view

GE IC670MDL240J 16-Point Discrete Input Module

Product Description The GE IC670MDL240J is identified as a discrete input module within the GE Fanuc Field Control series . It is designed to interface with binary state field devices such as switches, buttons, and sensors, converting their on/off signals for processing by a programmable logic controller . The module features 16 independent input channels and is built for industrial automation environments .

Quick view

GE IC670MDL640 Digital Input Module

Technical Specifications

Number of Input Channels: 16 digital input channels
Input Signal Types: Accepts 24 VDC input signals
Input Voltage Range: 0 to 30 VDC, with a nominal voltage of 24 VDC
User Input Current: 7.5 mA per point
Current Consumption: 75 mA from the Bus Interface Unit (BIU) power supply with all inputs active; maximum current consumption of 83 mA
On-State Voltage Rating: +15 VDC to +30 VDC for positive logic; -15 VDC to -30 VDC for negative logic

Quick view

GE IC670MDL740K Digital Output Module

Technical Specifications

Number of Output Channels: 16 digital output channels
Output Signal Types: Supports 24 VDC output signals
Output Current: 0.5 A per channel
Maximum Total Output Current: 8 A (for all channels combined)
Output Voltage Range: 10 VDC to 30 VDC
Power Consumption: 111 mA from the Bus Interface Unit (BIU) power supply

Quick view

GE IC676PBI016

Technical Specifications:

Input Voltage: 24 V DC
Output Voltage: 24 V DC
Maximum Power: 30 W
Operating Temperature: -20°C to 60°C
Storage Temperature: -40°C to 85°C
Humidity: 10% to 90% RH (non-condensing)
Dimensions: 100 mm x 80 mm x 30 mm
Weight: 200 g

Quick view

GE IC676PBO082 Output Module

The search results describe the GE IC676PBO082 in fundamentally different ways depending on the source. The most frequently cited description identifies it as an 8-point discrete output module for the GE VersaMax series that provides relay outputs for switching field devices. However, other sources describe it as a PROFIBUS-DP digital output block for VersaMax IP, while additional listings claim it is a relay output module for the Series 90-70 PLC platform, and one source identifies it as a push-pull digital output module for PACSystems RSTi-EP.

Quick view

GE IC687RCM711 Redundant Communication Module

Technical Specifications

Communication Protocol: Supports Ethernet/IP (compliant with ODVA standards), including Class 1 (real-time control) and Class 3 (non-real-time data) modes.
Network Interface: Two RJ45 Ethernet ports, supporting 10/100 Mbit/s adaptive speed with Auto-MDIX auto-crossover functionality.
Processor: 32-bit microprocessor with a main frequency of 200 MHz.
Memory: 128 MB RAM for data caching and 64 MB Flash for configuration storage.
Power Supply: Draws power from the internal 5V DC bus of GE RX3i PLC, with a maximum power consumption current of ≤300 mA.