GE IC752SPL013
- Product Introduction: The IC752SPL013 is a dedicated operator interface panel for GE EX2100 excitation control systems, serving as the primary HMI for generator excitation monitoring and control. It integrates a 16‑character alphanumeric display, 12‑button keypad, and multiple communication ports to enable parameter configuration, real‑time status visualization, alarm management, and manual control functions in power generation applications. It is engineered for harsh industrial environments, with an IP54/NEMA 4X enclosure rating and wide temperature tolerance.
- Manufacturer: GE Energy (General Electric Energy, now part of GE Vernova)
- Display: 16‑character alphanumeric backlit LCD; LED backlight for visibility in low‑light conditions
GE IC698PSA350
- Product Introduction: The IC698PSA350 is a 350W high-capacity power supply module designed for GE PACSystems RX7i PAC main racks, manufactured by GE Fanuc (now part of Emerson Automation). It plugs into slot 0 of the RX7i main rack, delivering +5 VDC, +12 VDC, and -12 VDC power to the backplane while providing logic-level sequencing signals for module operation. It supports wide input voltage ranges (85-264 VAC or 100-150 VDC), incorporates power factor correction, and features comprehensive protection mechanisms and status indicators.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Input Voltage Range: 85–264 VAC (47–63 Hz); 100–150 VDC
GE IC698ETM001
- Product Introduction: The IC698ETM001 is a dedicated Ethernet interface module for GE PACSystems RX7i controllers, equipped with a 200 MHz Ethernet processor and an internal switch. It enables high-speed TCP/IP communication with GE controllers, HMI/SCADA, and third‑party systems, supporting Ethernet Global Data (EGD), Service Request Transport Protocol (SRTP), and Modbus TCP. It features dual auto‑sensing Ethernet ports, a serial station manager port, and redundant IP addressing for network reliability, with comprehensive diagnostics and web‑based monitoring.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Ethernet Processor: 200 MHz dedicated Ethernet processor
GE IC698CPE040‑JP
- Product Introduction: The IC698CPE040‑JP is a single‑width, Japan‑specific CPU module for GE PACSystems RX7i PACs, powered by a 1.8 GHz Intel Pentium M microprocessor. It delivers high‑speed real‑time control for industrial processes, communicating with I/O and smart modules via a VME64 backplane. It integrates 64 MB battery‑backed RAM, 64 MB non‑volatile flash memory, dual 10/100BASE‑TX Ethernet ports, and three isolated serial ports (RS‑232/422/485). It supports IEC 61131‑3 programming languages, online logic modification, and firmware updates without hardware disassembly.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Processor: 1.8 GHz Intel Pentium M microprocessor, 32‑bit, supports floating‑point operations
GE IC698CPE030
- Product Introduction: The IC698CPE030 is a single‑width CPU module for GE PACSystems RX7i PACs, powered by a 600 MHz Intel Pentium M microprocessor. It provides high‑performance real‑time control, connecting to I/O and smart modules via a VME64 backplane. It features 64 MB battery‑backed RAM and 64 MB non‑volatile flash memory, dual 10/100BASE‑TX Ethernet ports, three isolated serial ports, and supports IEC 61131‑3 programming languages. It works with Series 90‑70 I/O modules and VME modules, and allows online logic modification without stopping the CPU, minimizing downtime in critical applications.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Processor: 600 MHz Intel Pentium M microprocessor, 32‑bit, supports floating‑point operations
GE IC698CPE010
- Product Introduction: The IC698CPE010 is a single‑width CPU module for GE PACSystems RX7i PACs, powered by a 300 MHz Celeron microprocessor. It delivers real‑time control for industrial machinery and processes, communicating with I/O/smart modules via a VME64 backplane. It includes 10 MB battery‑backed RAM, 10 MB non‑volatile flash memory, 2 Ethernet ports, 3 serial ports, and supports multiple IEC 61131‑3 programming languages, with web‑based monitoring and firmware updates without disassembly.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Processor: 300 MHz Intel Celeron microprocessor, 32‑bit, supports floating‑point operations
GE IC698CMX016
- Product Introduction: The IC698CMX016 is a reflective memory module for GE PACSystems RX7i PACs, enabling deterministic real-time data sharing across multiple CPUs and devices via fiber optic networks. It uses 16 MB reflective memory (SDRAM) to synchronize data between nodes with zero software latency, supporting VMIC5556-compatible reflective memory networks. Installed in RX7i main racks (slots 3/4), it connects via LC multi-mode fiber for daisy-chain or ring topologies, ideal for high-speed, deterministic control and data acquisition in industrial systems.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Reflective memory (Control Memory Xchange) module for PACSystems RX7i
GE IC698CHS117C
- Product Introduction: The IC698CHS117C is an 18‑slot wall‑mount I/O chassis for GE PACSystems RX7i PACs, built on a VME64 backplane with 4x standard VME bandwidth for high‑speed I/O throughput. It supports RX7i CPUs, RX7i I/O modules, Series 90‑70 I/O, and standard VME modules, with slot 0 dedicated to power modules, slot 1 for CPU (slot 2 used if dual‑width CPU with embedded Ethernet), and slots 3–18 for I/O. It features slot sensing, software configuration (no DIP switches/jumpers), and works with high‑power RX7i power supplies, delivering reliable, scalable I/O expansion for industrial control systems.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Chassis Type: 18‑slot wall‑mount I/O chassis for PACSystems RX7i
GE IC697PWR711K
- Product Introduction: The IC697PWR711K is a 100W rack-mounted switching power supply module designed for GE Series 90-70 PLC systems, installed in the leftmost slot of standard IC697 or VME Integrator racks via a 48-pin backplane connector. It delivers +5 VDC, +12 VDC, and -12 VDC regulated outputs to power PLC CPUs, I/O modules, and peripherals, with support for 120/240 VAC or 125 VDC input, power factor correction, and ride-through capability for transient power loss. It can power one or two racks when total load stays within 100W rating, connected via a prewired inter-rack cable.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: 100W switching power supply for Series 90-70 PLC backplanes
GE IC697CMM742
- roduct Introduction: The IC697CMM742 is a single‑slot TCP/IP Ethernet (Type 2) Interface Module for GE Series 90‑70 PLC systems, delivering 10 Mbps Ethernet connectivity compliant with IEEE 802.3 standard. It has three network ports (10BaseT RJ‑45, 10Base2 BNC, AUI 15‑pin D), one RJ‑11 RS‑232 Local Station Manager Port, and one 15‑pin D‑type Serial Software Load Port, supporting TCP/IP, SRTP, EGD, and Modbus TCP/IP protocols for seamless integration with Ethernet LAN, SCADA, HMI, and other industrial devices.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single‑slot Ethernet Interface Module (Type 2) for Series 90‑70 PLC baseplates
GE IC697CMM711
- Product Introduction: The IC697CMM711 is a single-slot communications coprocessor module for GE Series 90-70 PLC systems, equipped with a 12 MHz 80C186 microprocessor and dual configurable RS-232/RS-422/RS-485 serial ports (25-pin D-shell female connectors). It supports CCM (master/slave/peer), SNP/SNP‑X (master/slave), and Modbus RTU (slave only) protocols, enabling multi‑drop network data exchange between the PLC and other industrial devices, with software configuration eliminating manual jumpers/switches.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single‑slot communications coprocessor module for Series 90-70 baseplates
- Microprocessor: 12 MHz 80C186
GE IC697BEM721
- Product Introduction: The IC697BEM721 is a single-slot I/O Link Interface Module designed for GE Series 90-70 PLC systems, providing a high-speed serial interface between the PLC and up to 16 CNC-compatible I/O Link devices. It features dual RS-422/485 ports, conformal coating for harsh environments, and three LED indicators for real-time status monitoring, enabling seamless integration and data exchange in industrial automation applications.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: I/O Link Interface Module for Series 90-70 PLCs
