GE IS200TBCIH2CCD Contact Input Group Isolation Terminal Board (TBCI).
Product Introduction
The IS200TBCIH2CCD is a Contact Input Group Isolation Terminal Board manufactured by GE, specifically designed for the Mark VI Speedtronic series of gas and steam turbine management systems. It serves as a critical component for efficient signal termination, processing, and isolation of dry contact inputs in industrial control environments. This board facilitates seamless integration with GE's Mark VI platform, ensuring reliable and precise data acquisition while maintaining system integrity in demanding industrial settings. It supports both simplex and Triple Modular Redundancy (TMR) applications, working in conjunction with VTCC/VCRC processor boards in VME racks.
GE SFLA36AT0250
Product Overview
The GE SFLA36AT0250 is a 3-pole molded case circuit breaker (MCCB) from the Spectra RMS™ series, engineered for industrial and commercial power distribution systems requiring precise, reliable overcurrent protection. It features a digital solid-state RMS sensing trip unit with LSI (Long-Time, Short-Time, Instantaneous) protection functions, adjustable settings, and field-installable rating plugs for flexible ampacity configuration (70–250A). The bolt-on mount design ensures secure panelboard installation, while current-limiting technology minimizes fault energy let-through to protect downstream equipment.
GE RS-FS-9001
Product Overview
The GE RS-FS-9001 is a high-performance ultraviolet (UV) flame sensor from the Reuter-Stokes Flame Tracker™ series, engineered for industrial high-risk environments requiring reliable flame presence detection. It uses a silicon carbide (SiC) photodiode to capture long-wavelength UV radiation emitted by flames, which penetrates fuel mist, steam, and water vapor better than traditional UV sensors. The two-wire design with 4–20 mA output enables seamless integration with safety controllers, DCS, or PLC systems for rapid alarm triggering and safety shutdowns. It operates reliably in extreme temperatures (with optional water cooling), high pressure, and heavy vibration, making it ideal for combustion systems where false alarms or missed detection could lead to catastrophic incidents. The sensor replaces legacy models like 362A1052P001 and meets global safety certifications for hazardous area use.
GE PWB68A993125
Product Overview
The GE PWB68A993125 is a dedicated industrial control printed circuit board designed for SCR (Silicon Controlled Rectifier) gate driving, signal filtering, and electrical interface management in industrial automation, HVAC, and power control systems. It integrates SCR gate drive circuits, signal filtering stages, and terminal blocks to enable precise switching and regulation of SCR-based power circuits, ensuring stable load control and protection against electrical noise/interference. The board supports direct connection to standard industrial sensors, controllers, and SCR power modules, and operates reliably in harsh industrial environments with wide temperature ranges and electrical noise immunity. It serves as a critical interface between control systems (PLCs, DCS) and power switching components, facilitating seamless integration and enhanced system safety.
GE PQMII-T20-C
Product Overview
The GE PQMII-T20-C is a high-precision power quality meter from the PQM II Series, engineered for continuous monitoring, analysis, and control of three-phase electrical systems in industrial, commercial, and utility applications. It delivers comprehensive measurement of voltage, current, power, energy, frequency, harmonics, and power quality events (sags, swells, transients) with industry-leading accuracy. The unit supports 20 current inputs and 4 voltage inputs for multi-circuit monitoring, integrates 4 isolated analog outputs, 4 relay outputs, and 4 switch inputs for control/alarming, and offers Modbus RTU communication via RS232/RS485. It includes advanced features such as 63rd harmonic analysis, voltage disturbance recording (VDR), event logging, and waveform capture to diagnose power quality issues and protect critical assets.
DEIF PPU/2/GS
Product Overview
The DEIF PPU/2/GS (GE PPU2GS) is a compact, rugged generator paralleling and protection unit designed for precise control, synchronization, and protection of single or multiple generator sets in marine, industrial, and offshore power systems. It enables seamless paralleling of generators to share load, optimizes fuel efficiency, and provides comprehensive protection against electrical faults and operational anomalies. The unit integrates voltage, current, frequency, and power factor monitoring with advanced protection algorithms, ensuring safe and reliable power distribution. It supports manual or automatic synchronization, load sharing, and generator shedding based on predefined parameters, and interfaces with SCADA systems via analog outputs and optional communication modules.
GE PCH1026
Product Overview
The GE PCH1026 is a highly configurable digital structural vibration monitor engineered for low‑frequency (0.05–1000 Hz) monitoring in wind turbines, developed in collaboration with global turbine manufacturers and protecting over 100,000 units worldwide. It integrates a 3‑axis internal accelerometer (X/Y/Z) and up to 4 external sensor inputs to capture acceleration, velocity, and displacement across critical turbine structuresPCH Engineering A/S. The unit uses advanced DSP with 50% overlap FFT, 127 zoom ranges, and programmable filters to isolate structural modes from operational noise, delivering precise RMS/Peak/Peak‑to‑Peak measurements.
GE MX150
Product Overview
The GE MX150 is a microprocessor-based controller designed for GE Zenith ZTG/ZTGD/ZTGSE/ZTGDSE series automatic transfer switches (ATS), serving as the core control unit for emergency and standby power systems. It replaces the legacy MX100 controller and integrates a microprocessor board, LCD/keypad interface, and isolated I/O for seamless interaction with dual power sources (S1: normal, S2: emergency). The controller monitors voltage, frequency, and phase synchronization of both sources, automatically transferring loads to the backup source when the normal source fails, and retransferring once the normal source stabilizes within preset parameters.
Motorola MVME51005E-0163
roduct Overview
The MVME51005E-0163 is a high-performance 6U VME64x single-board computer (SBC) from GE (formerly Motorola Computer Group, later Emerson/Artesyn), built for mission-critical embedded systems requiring deterministic processing, rugged reliability, and long-term availability. It features the Freescale PowerPC 7455 (G4) processor running at 1.0 GHz, with 32KB L1 (I/D) cache, 2MB on-die L2 cache, and an AltiVec 128-bit SIMD unit for accelerated signal processing. The board integrates 512MB ECC DDR SDRAM (expandable to 1GB/2GB), 8MB Flash, and CompactFlash Type I/II storage for reliable data retention and boot capabilities. It includes dual 10/100/1000Base-T Ethernet ports, two RS-232/422 serial ports, USB 2.0, and a 64-bit PMC slot for I/O expansion, alongside a VME64x interface (64-bit/66MHz, 2eSST support) for seamless integration with legacy and modern VME systems.
Motorola MVME-2400
Product Overview
The MVME-2400 is a high-performance VME single-board computer (SBC) from GE (formerly Motorola Computer Group), designed for embedded computing in industrial automation, military/aerospace, telecommunications, and medical systems. It features the low-power, high-performance MPC750 PowerPC microprocessor (233/350/450 MHz) with 32KB/32KB L1 cache and 1MB L2 cache, delivering robust processing for real-time control and data acquisition. The board integrates 32MB–512MB ECC SDRAM (100 MHz PC100), 8MB Flash, and 1MB PROM for reliable operation in harsh environments, and includes dual PMC (PCI Mezzanine Card) slots for flexible I/O expansion—supporting up to six PMCs with optional PMCspan modules. It provides 10/100Base-T Ethernet, RS232/RS485 serial ports, and VME64 interface (64-bit/66MHz, 40MB/s max) for seamless integration with legacy and modern systems.
GE MM2-PD-1-2-120
Product Overview
The MM2-PD-1-2-120 is a microprocessor-based intelligent motor management system from GE Multilin’s Motor Manager 2 (MM2) series, engineered for real-time protection, control, and monitoring of industrial motors in motor control centers (MCCs) and panel-mount applications. It integrates process control (10 process inputs, undervoltage autorestart) and enhanced protection (power measurement, thermistor monitoring, 2nd contactor control, 2 process inputs) in a single device, with a 120V AC control voltage for global compatibility. The unit features a full-faceplate LCD display for real-time visualization of phase/ground current, thermal capacity, power, and energy, and supports Modbus RTU communication for SCADA integration.
GE ML2400-F-AC-XX-A6-A4-XX-XX-X
Product Overview
The ML2400-F-AC-XX-A6-A4-XX-XX-X is a fully managed, rugged Ethernet switch from GE Multilin’s MultiLink series, designed for harsh industrial and utility environments, including power substations, manufacturing plants, and critical infrastructure. It features a front-mounted port configuration for easy access, an AC power supply (100–240V AC), and a modular design with A6 (16-port 10/100Base-TX copper) and A4 (8-port 100Base-FX fiber) communication modules. The switch delivers deterministic network performance with IEEE 802.1p QoS, SMART RSTP for fast network recovery, and Link-Loss-Alert for rapid fault detection. It supports IEC 61850 (GOOSE/MMS), Modbus, and DNP3 protocols for seamless integration with SCADA/DCS systems, and offers advanced security features including port security, RADIUS/TACACS+ authentication, and SSH/HTTPS encryption.
