GE

The IC694MDL940 is a 16‑channel normally‑open (Form A) relay output module from GE Fanuc (Emerson Automation) for PACSystems RX3i PLCs, offering 16 individually isolated outputs split into 4 groups of 4, each with a dedicated common terminal. It switches AC/DC loads (5–250VAC, 5–30VDC) with 2A per point (pilot duty), 4A per group common, and 5A inrush handling, plus 250VAC continuous (1500VAC surge) field‑to‑backplane/point‑to‑point isolation. It has 15ms on/off response, per‑channel LED indicators, and runs on +24VDC backplane power (135mA) with no external supply needed. The single‑slot module converts PLC digital commands into relay‑switched signals for industrial actuators, ideal for mixed AC/DC control with noise immunity and safety isolation.

The IC694PWR330 is a 30-Watt high-capacity serial expansion power supply module tailored for GE PACSystems RX3i, dedicated to supplying regulated power to serial expansion backplanes. It accepts a wide input range of 85–264 VAC or 100–300 VDC, and delivers three outputs: 5 VDC (30W max) for backplane logic, 24 VDC Relay (15W max) for output relay modules, and 24 VDC Isolated (20W max) for 24 VDC input modules and external devices. It integrates 1500 VAC input-to-backplane isolation, comprehensive protection (overvoltage, undervoltage, overcurrent, short - circuit), and LED indicators for power, output status, and faults. It is a non - hot - swappable module, exclusively for serial expansion backplanes, offering stable supplementary power for distributed RX3i systems in industrial automation applications.

The IC695ALG708 is an 8-channel non-isolated analog output module for PACSystems RX3i, designed to deliver precise voltage and current signals for industrial control applications. It is fully software-configurable via Proficy Machine Edition (no jumpers), with each channel independently settable to voltage (±10 V, 0–10 V) or current (0–20 mA, 4–20 mA) outputs. It offers 15.6–15.9 bits resolution (per range), 8 ms full-channel update rate, full autocalibration, and on-board diagnostics including high/low/high-high/low-low alarms, clamping, and over/underrange detection. The module uses detachable terminal boards (IC694TBB032/TBS032 or extended versions), supports hot-swap, and operates with RX3i CPUs (firmware 3.00+), providing flexible, high-precision control for actuators, valves, drives, and other field devices.

The IC695CPE305 is a single‑slot, high‑performance CPU module from GE Fanuc (Emerson Automation) for PACSystems RX3i PLCs, featuring a 1.1GHz processor, 5MB RAM user memory, 5MB non‑volatile flash storage, and embedded 10/100Mbps Ethernet (PROFINET, Modbus TCP, SRTP), RS‑232 serial, and USB 2.0 ports. It supports 4 programming languages (Ladder Diagram, Structured Text, Function Block Diagram, C), 512 program blocks (max 128KB/block), and legacy Series 90‑30 I/O compatibility. The module runs on 3.3V (1.0A)/5V (1.0A, up to 1.5A with USB)/24V (0.5A startup/0.1A run, Energy Pack) backplane power, has 32Kbits discrete/%I/%Q and 32Kwords analog/%AI/%AQ reference tables, and includes an optional IC695ACC400 Energy Pack for power‑loss data protection. It delivers deterministic control for process/manufacturing automation with 0.72ms per 1000 Boolean instructions scan time and seamless HMI/SCADA integration via OPC UA.

The IC695CPE305LT-ABAD is a rugged, high-performance multicore CPU module in the PACSystems RX3i lineup, built for real-time control of machines, processes, and distributed automation systems in extreme industrial environments. It features a 1.1 GHz dual-core processor, 5 MB RAM, and 5 MB non-volatile flash user memory, with battery-less data retention via the IC695ACC400 Energy Pack. It is equipped with 2 switched gigabit Ethernet ports, 1 isolated RS-232/485 serial port, and 1 USB 2.0 port, supporting protocols such as SRTP, Modbus TCP/IP, OPC UA, PROFINET, and Modbus RTU. The module operates on RX3i Universal Backplanes, supports up to 512 program blocks, and is compatible with Series 90-30 I/O for seamless migration. It uses Proficy Machine Edition for programming in Ladder Diagram, Structured Text, Function Block Diagram, and C, delivering powerful processing, secure communication, and flexible scalability for mission-critical industrial applications in harsh conditions.