GE IC697ALG320
- Product Introduction: The IC697ALG320 is a high-level analog output module for GE Series 90-70 PLC systems, featuring 4 individually configurable channels for voltage or current outputs, with no jumpers/DIP switches needed for setup. It offers 16-bit DAC resolution (14-bit monotonicity), output-backplane isolation, factory calibration data stored in EEPROM, and supports unipolar/bipolar voltage (0-10 VDC, ±10 VDC) and current (0-22.5 mA, 4-20 mA) signals, designed for precise control of industrial actuators, valves, and process control loops.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot high-level analog output module for Series 90-70 PLC baseplates
GE IC695RMX128
- Product Introduction: The IC695RMX128 is a single-slot reflective memory module for GE PACSystems RX3i universal backplanes, delivering 128 MB user memory for real-time data sharing across redundant CPU pairs and reflective memory networks. It uses 2.12 Gbaud fiber-optic links (LC connectors) for 2.1 GB/s deterministic data transfer, supports hot insertion/removal, dynamic packet sizing, and network error detection, enabling seamless failover and data synchronization in mission-critical industrial control systems.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot reflective memory module for RX3i redundant CPU systems and reflective memory networks
GE IC695PSD140E
- Product Introduction: The IC695PSD140E is a 40-Watt DC-input multipurpose power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC, +3.3 VDC, and +24 VDC outputs for powering RX3i CPU, I/O, communication, and relay modules. It supports redundancy and load-sharing setups, can be daisy-chained up to four units, and features front-panel LED indicators and an on/off switch with a protective cover, optimized for industrial DC power systems requiring reliable and expandable power distribution.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot 24 VDC input multipurpose power supply module for RX3i universal backplane
GE IC695PSD140A
- Product Introduction: The IC695PSD140A is a 40-Watt DC-input power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC, +3.3 VDC, and +24 VDC outputs. It is built for load-sharing and redundancy setups, supports daisy-chaining up to four units, and powers RX3i CPU, I/O, communication, and relay modules in industrial DC power systems.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot 24 VDC input multipurpose power supply module for RX3i universal backplane
GE IC695PSD040F
- Product Introduction: The IC695PSD040F is a 40-Watt DC-input power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC and +3.3 VDC outputs for powering RX3i CPU, I/O modules, and internal circuits. It features front-panel LED status indicators, an on/off switch with a protective cover, and supports daisy-chaining up to two units for expanded capacity, optimized for industrial environments with DC power infrastructure.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot 24 VDC input power supply module for RX3i universal backplane
- Input Voltage (Nominal): 24 VDC
GE IC695PSD040
- Product Introduction: The IC695PSD040 is a 40-Watt DC-input power supply module designed for GE PACSystems RX3i universal backplanes, operating from a nominal 24 VDC input to deliver regulated +5.1 VDC and +3.3 VDC outputs for powering RX3i CPU, I/O modules, and internal circuits. It features LED status indicators, on/off switch with protective cover, and supports daisy-chaining up to two units for expanded capacity, ideal for industrial environments with DC power infrastructure.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot 24 VDC input power supply module for RX3i universal backplane
GE IC695PSA040
- Product Introduction: The IC695PSA040 is a 40-Watt universal power supply module for GE PACSystems RX3i controllers, converting 85-264 VAC or 100-300 VDC input into regulated +3.3 VDC, +5.1 VDC, and +24 VDC outputs. It powers RX3i backplane modules, CPU, I/O, and relay circuits, with front-panel LEDs for status monitoring, and works exclusively in RX3i universal backplanes (one module per backplane, no redundancy).
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: 40-Watt power supply module for RX3i PACSystem universal backplane
GE IC695PBM300
- Product Introduction: The IC695PBM300 is a single-slot PROFIBUS-DP master module for GE PACSystems RX3i controllers, enabling seamless integration of PROFIBUS-DP networks with RX3i systems. It connects up to 125 PROFIBUS-DP slaves, supports DP-V1 advanced messaging, Sync/Freeze modes, and field-upgradable firmware, designed for discrete and process automation requiring reliable industrial communication.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot PROFIBUS-DP master communication module for RX3i universal backplane
GE IC695NIU001
- Product Introduction: The IC695NIU001 is a single - slot Ethernet Network Interface Unit for GE PACSystems RX3i controllers, enabling remote use of RX3i and Series 90 - 30 I/O on Ethernet networks. It works with the backplane - based Ethernet interface module IC695ETM001 for Ethernet communication, features two configurable serial ports (RS - 232/RS - 485), supports automatic data exchange via EGD, and offers local logic execution, data storage, and redundant controller compatibility.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single - slot Ethernet Network Interface Unit (ENIU) for RX3i PACSystem
GE IC695ETM001CA-ER
- Product Introduction: The IC695ETM001CA-ER is an enhanced dual-port Ethernet interface module for GE PACSystems RX3i controllers, offering advanced network redundancy, enhanced security, and extended temperature range, fully compatible with RX3i hot standby redundant systems (IC695RMX128) to ensure continuous network connectivity in mission-critical applications.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single-slot Ethernet interface module for RX3i universal backplane
GE IC695ETM001
- Product Introduction: The IC695ETM001 is a single - slot, dual - port Ethernet interface module for GE PACSystems RX3i controllers, connecting the controller to 10/100 Mbps Ethernet networks, supporting TCP/IP, SRTP, Modbus TCP, and EGD protocols, and featuring an embedded switch with auto - negotiation, crossover detection, and a Station Manager port for online configuration and monitoring.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Module Type: Single - slot Ethernet interface module for RX3i backplane
GE IC695CRU320-EN
- Product Introduction: The IC695CRU320-EN is a high-performance hot standby redundant CPU module in GE PACSystems RX3i platform, built with 1 GHz Intel Celeron-M processor, supporting dual-slot installation, seamless switchover between master and standby CPUs within 3.133 ms to 1 logic scan, and providing 64 MB battery-backed RAM and 64 MB non-volatile flash memory, ideal for mission-critical industrial automation systems requiring uninterrupted operation.
- Manufacturer: GE Fanuc (General Electric Fanuc Intelligent Platforms, now part of Emerson Automation)
- Processor: 1 GHz Intel Celeron-M 32-bit microprocessor
