Foxboro FXAOM01AD Analog Output Module
Model Series: FXA Series — I/A Series Analog Output
Manufacturer: Foxboro (Schneider Electric / Invensys)
Product Overview:
The FXAOM01AD is a single-channel analog output module from the Foxboro I/A Series FXA family. It converts digital control signals from the processor into a 4–20 mA, 2-wire analog current output for driving field control valves, actuators, and other final control elements.
FOXBORO FBM242 RH916YY Analog Output Module
Product Series: I/A Series Foundation Fieldbus Module
Product Introduction:
The FBM242 is an 8-channel analog output module for the Foxboro I/A Series DCS. Revision RH916YY identifies the specific hardware/firmware version. This module provides 4-20mA current output signals to control final control elements including control valves, variable frequency drives (VFDs), damper actuators, and other current-driven devices. It features per-channel diagnostics and individual channel isolation.
FOXBORO FBM237 P0914XS Analog Input Module
Product Series: I/A Series Foundation Fieldbus Module
Product Introduction:
The FBM237 is a 16-channel analog input module for the Foxboro I/A Series DCS. Revision P0914XS indicates the specific firmware/hardware revision. This module accepts 4-20mA, 0-20mA, 0-10V, and 1-5V analog signals from field transmitters including pressure transmitters, temperature transmitters (RTD/TC), level transmitters, and flow transmitters. It provides high-resolution, isolated analog-to-digital conversion with built-in diagnostics.
FOXBORO FBM231 Serial Communication Module
Product Series: I/A Series Foundation Fieldbus Module
Product Introduction:
The FBM231 is a dual-port RS-422/RS-485 serial communication module for the Foxboro I/A Series DCS. It provides high-speed, noise-immune serial communication for connecting to remote I/O, RTUs, variable frequency drives (VFDs), and other industrial devices using Modbus RTU/ASCII and DF1 protocols.
FOXBORO FBM230 Serial Communication Module
Product Series: I/A Series Foundation Fieldbus Module
Product Introduction:
The FBM230 is a dual-port serial communication interface module for the Foxboro I/A Series DCS. It provides RS-232 and RS-485 communication capabilities, enabling the controller to interface with legacy devices, RTUs, PLCs, and other serial devices using Modbus RTU/ASCII protocols.
Foxboro FEM100 Foundation Fieldbus H1 Interface Module
Product Classification: Foundation Fieldbus H1 Segment Interface Module
Product Introduction:
The Foxboro FEM100 is a Foundation Fieldbus H1 interface module for the Foxboro I/A Series DCS. It provides the physical layer and data link layer connection to Foundation Fieldbus H1 segments, enabling communication with FF H1-enabled field devices including transmitters, valves, analyzers, and positioners. The FEM100 supports up to 32 FF devices per segment and provides intrinsic safety barriers for hazardous area installations.
Foxboro FCP280 Analog Output Module
Product Classification: 8-Channel / 16-Channel Analog Output Module (4–20 mA)
Product Introduction:
The Foxboro FCP280 is a dedicated analog output module for the Foxboro I/A Series DCS. It provides multiple channels of 4–20 mA current loop outputs used to control final control elements such as control valves, variable speed drives (VFDs), damper actuators, and other current-loop-driven devices. The module delivers precise, isolated analog output signals with per-channel diagnostic capability.
Foxboro P0916AC Analog Input Module
Model Series: P09 Series — I/A Series Analog Input
Manufacturer: Foxboro (Schneider Electric / Invensys)
Product Overview:
The P0916AC is a 16-channel analog input module for the Foxboro I/A Series DCS. It accepts 4–20 mA, 4-wire signals from field transmitters. The "AC" variant is configured for 4-wire transmitters where loop power is supplied externally, allowing higher accuracy and isolation from the module's internal power supply.
Foxboro N-2AX+DIO Ethernet Communication Module with Digital I/O
Model Series: N-2AX Series — I/A Series Network Interface Module
Manufacturer: Foxboro (Schneider Electric / Invensys)
Product Overview:
The N-2AX+DIO is a dual-port Ethernet communication module with integrated digital input/output (DIO) for the Foxboro I/A Series DCS. It provides 10/100 Mbps Ethernet connectivity for system integration, HMI access, and remote engineering, while also offering 8 digital inputs and 8 digital outputs for local discrete I/O control.
Foxboro IPM2-P0904HA Intelligent Valve Positioner
Model Series: IPM2 Series — Smart Positioner
Manufacturer: Foxboro (Schneider Electric / Invensys)
Product Overview:
The IPM2-P0904HA is a HART-compatible intelligent electro-pneumatic valve positioner from the Foxboro IPM2 product family. It provides precise control of pneumatic control valves by converting a 4–20 mA control signal into a proportional pneumatic output pressure. It supports HART 5/7 protocol for digital communication and advanced diagnostics.
Foxboro FBM242 RH916YY High-Speed Counter
Product Classification: High-Speed Event Counter and Pulse Input Module
Product Introduction:
The Foxboro FBM242 with part number RH916YY is a high-speed counter and pulse input module designed for precise measurement of frequency, totalization, and event counting in the Foxboro I/A Series DCS. It accepts high-frequency pulse signals from flow meters, turbine meters, encoders, and other pulse-generating devices. The RH916YY revision identifies the specific hardware configuration of this module.
Foxboro FBM237 P0914XS Serial Communication Module
Product Classification: Serial Communication Interface (SCI) Module
Product Introduction:
The Foxboro FBM237 with part number P0914XS is a serial communication module that provides RS-232/RS-422/RS-485 serial interface capability for the Foxboro I/A Series DCS. It enables communication with external devices such as PLCs, RTUs, smart instruments, variable frequency drives (VFDs), and third-party systems using standard serial protocols. The P0914XS revision denotes the specific hardware/firmware variant of this module.
