SUPERIOR ELECTRIC M092-FF-206 - Image 1
Click to enlarge
TEKNIC M-2330-109
TEKNIC M-2330-109
Back to products
Lenze MDFKARS080-22
Lenze MDFKARS080-22

SUPERIOR ELECTRIC M092-FF-206

Product Name​
Superior Electric SLO-SYN M092-FF-206 synchronous/stepping motor.
Introduction​
M092-FF-206 is a SLO-SYN stepping/synchronous motor from Superior Electric. It is intended for positioning drives, indexing tables, automation feeders and other applications requiring repeatable step motion with holding torque.
Category:
Description
Technical Specifications​
Model M092-FF-206, SLO-SYN family. Motor type synchronous/stepping. Rated voltage 4.0 V. Rated current 4.0 A. Step count 200 steps per revolution, equal to 1.8° full-step angle. Holding torque 370 oz-in. Temperature rise 65°F above ambient at rated condition in cited distributor data. Insulation Class A. Connection configuration per SLO-SYN FF winding; verify 4-lead, 6-lead or 8-lead arrangement from the nameplate because controller compatibility depends on lead count. Frame family M092 corresponds to the 90 mm/NEMA 34-class SLO-SYN size in Superior Electric M-series documentation.
Functional Features​
200-step full-step indexing, high holding torque for static load retention, synchronous operation with compatible SLO-SYN drive, reversible direction, zero-backlash coupling benefit when used with rigid mechanical linkage, and Class A insulation for general industrial duty.
Application Scenarios​
Indexing tables, conveyor positioning, valve actuation, packaging machines, textile equipment, laboratory automation, robotics prototypes and replacement service for legacy Superior Electric SLO-SYN systems.
Performance Parameters​
4.0 V, 4.0 A, 200 steps/rev, 370 oz-in holding torque, 65°F rise at rated condition, Class A insulation. Actual speed-torque curves depend on drive type, supply voltage, microstepping setting and inertia load.
Material Composition​
Cast or laminated stator stack, copper windings with Class A insulation system, rotor with permanent-magnet or reluctance configuration according to SLO-SYN M092 variant, steel shaft, aluminum or cast end bells, and standard lead exit box or connector.
Structural Characteristics​
M092 90 mm-class frame with square mounting flange, central output shaft, rear terminal or lead outlet, and holes compatible with SLO-SYN mounting kits. Size and mass should be confirmed from the M092 drawing because FF-206 lead configuration affects terminal box type.
Working Principle​
The drive energizes stator phases in sequence. The rotor moves one step per phase commutation, producing discrete angular increments. In full-step mode the motor uses 200 increments per revolution. Holding current maintains position without movement. With a synchronous drive and AC/DC excitation profile, the motor can also run as a constant-speed synchronous device depending on controller.
Installation Requirements​
Mount on the SLO-SYN M092 flange with matched bolts and coupling concentricity. Identify lead count and phase pairing before connecting the drive. Use a Superior Electric SS-series or compatible stepper drive rated for 4.0 V/4.0 A or appropriate chopped/constant-current supply. Provide cooling allowance for 65°F temperature rise at rated current. Ground the frame according to machine electrical design.
Usage Precautions​
Do not exceed 4.0 A without verifying winding thermal rating; Class A insulation has lower temperature allowance than Class H or F motors. Avoid sustained operation inside the motor’s natural-resonance speed band without acceleration profiling. Confirm 200-step and lead configuration before replacing another M092 variant, because FF-206 electrical data may not match FF-402 or other suffix windings. Inspect leads and terminal box for insulation integrity before energizing.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “SUPERIOR ELECTRIC M092-FF-206”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

BENDER IRDH575B1W-435

Technical Specifications:
    • Rated Voltage: Up to 690 V AC, 24–300 V DC
    • Measuring Range: 0 to 999 kΩ (depending on voltage level)
    • Response Time: Rapid detection time for insulation faults
    • Operating Temperature: -10°C to +60°C
    • Storage Temperature: -25°C to +70°C
    • Humidity Range: 0% to 95% relative humidity, non-condensing
    • Communication Interfaces: RS-485, Modbus RTU, Ethernet interface for network integration
    • Display: LCD display for status indication and parameter setting
Read more
Quick view

CCC IOC-555-D 17-550555-001 Simplex I/O Card / Communication Control Board

Technical Specifications:
  • The module offers 16 serial input/output channels.
  • It integrates a processor, memory, and I/O interfaces into a compact form factor suitable for embedded systems.
  • It supports high computing performance with low power consumption characteristics.
  • Storage options include flash memory and RAM for storing the operating system, applications, and data.
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

Motorola IPMC761-002

  • Processor: Equipped with an MPC7450 series PowerPC processor at 1 GHz, with 512 KB of on - chip L2 cache and 2 MB of L3 cache, and an Altivec coprocessor for high - performance computational applications.
  • Memory: Two banks of soldered flash memory.
  • Communication Interfaces: Includes 1 parallel port, 2 asynchronous serial ports, and 2 synchronous/asynchronous serial ports.
  • Bus Type: VME bus.
  • Power Supply: Draws +5 V and +3.3 V through the PMC connectors.
  • Dimensions: 263 × 58 × 28 mm.
  • Weight: 4.3 kg.
Read more
Quick view

ONLINE DEVELOPMENT 56SAM-810

Technical Specifications:
  • Processor: Equipped with a high-performance microprocessor tailored for real-time processing tasks, ensuring efficient operation in demanding environments.
  • Memory: Includes both RAM and flash memory options to facilitate program execution and data storage. The exact size can vary but is typically sufficient for storing application-specific software and temporary data.
  • Communication Interfaces: Supports multiple communication protocols, including serial interfaces (RS-232/485), Ethernet, and possibly fieldbus options like CAN or Modbus, facilitating connectivity with other devices and systems.
  • Input/Output Capabilities: Designed to interface with various sensors, actuators, and control systems through configurable digital and analog input/output channels.
Read more
Quick view

PARKER AR-04AE-13574

Functional Characteristics High – Performance: Provides high – torque output and fast response, enabling precise control of servo motors. Easy
Read more
Quick view

ygo 7702 8070-0102-35

  • Laser Type: Helium - neon laser
  • Wavelength: 633 nm
  • Output Power: > 400 µW
  • Beam Diameter: 3 mm or 6 mm
  • Usable Beam Length: 2 m
  • Beam Pointing Stability: < 0.1 arc sec/°C
  • Operating Temperature: 10 - 30 °C
  • Vacuum Wavelength Stability: 0.01 ppm/24 hour
  • Mounting Type: May have different mounting options, such as with plastic mounting feet.
  • Weight: Approximately 5.5 kg (for some models of the 7702 laser head)
Read more
Quick view

ZYGO ZMI-2002 8020-0211-1-J Precision Measurement System

Technical Specifications:
  • The ZMI-2002 operates based on innovative interferometry principles, offering nanometer-level precision for surface form measurements.
  • It supports a wide range of optical configurations to accommodate diverse measurement needs.
  • Capable of providing high-resolution data, which ensures accurate characterization of surfaces and components.
Read more
Quick view