LAPP 1030211

• Number of Cores: 12 cores
• Cross‑Section per Core: 0.14 mm²
• Core Insulation Material: PVC compound
• Outer Sheath Material: PVC, black outer sheath
• Core Colour Coding: DIN 47100 standard colour‑coding scheme
• Rated Voltage: 250 V
• Test Voltage: 1200 V AC
• Operating Temperature Range: ‑20 °C up to +70 °C fixed installation; ‑5 °C up to +70 °C for flexible movement
• Flame Behaviour: Flame‑retardant compliant with IEC 60332‑1‑2
• Approval Standards: VDE certified, CE marked, CPR classification available

Functional Features

• Compact outer diameter despite high core count, saving wiring space inside cabinets
• Fine‑stranded conductor provides good flexibility for occasional bending and wiring routing
• PVC insulation and sheath deliver general‑purpose resistance against oils and chemical agents
• Flame‑retardant construction limits flame propagation inside electrical enclosures

Application Scenarios

• Control‑cabinet internal signal‑wiring
• Office machines, weighing instruments, measurement equipment
• PLC signal‑I/O interconnections, low‑voltage control‑signal transmission
• Dry‑and‑damp indoor environments with light mechanical stress; occasional non‑repetitive flexing

Performance Parameters

• Copper index: 11.3 kg/km
• Cable weight: 33 kg/km
• Mutual capacitance between adjacent cores: approximately 120 pF/m

Material Composition

• Conductor: Bare electrolytic‑copper fine strands
• Core insulation: Special‑formula PVC insulation compound
• Outer sheath: Abrasion‑resistant black PVC outer jacket

Structural Characteristics

• Multiple insulated cores twisted in layered concentric stranding
• Overall compact circular outer profile
• No overall shielding layer
• Outer‑sheath surface continuously printed with LAPP part number and product identification text

Working Principle Multi‑core cable conducts low‑level digital and analogue control‑signal potentials between automation components; twisted‑core construction reduces internal crosstalk between signal lines.

Installation Requirements

• Suitable for fixed installation and only occasional flexing; not designed for continuous‑motion drag‑chain service
• Minimum bending radius: 8 × outer cable diameter for fixed installation; 15 × outer diameter during manual flexing
• Avoid pulling cable via conductor cores; mechanical tension must act on outer‑sheath jacket

Usage Notes

• Not suitable for high‑EMI environments without additional external shielding measures
• Not rated for direct burial underground
• Not intended for power‑circuit main‑power wiring; limited to low‑level control‑signal circuits
• Avoid exposure to strong solvents and concentrated chemicals