Reliance Electric 57C417

Technical Specifications

• Series: AutoMax‑DCS‑system‑interface‑module
• External‑Communication‑Interface: RS‑232‑serial‑port‑for‑AutoMate‑link‑connection
• Backplane‑Bus: AutoMax‑proprietary‑chassis‑backplane‑bus‑interface
• Operating‑Ambient‑Temperature: 0 °C ~ +60 °C
• Storage‑Temperature: −40 °C ~ +85 °C
• Mounting‑Mode: Plug‑in‑slot‑installation‑inside‑AutoMax‑main‑chassis
• Diagnostic‑Indicator: Front‑panel‑status‑LED‑for‑interface‑communication‑state‑indication
• Weight: Approximately 0.55 kg
• Functional Features
• Dedicated‑hardware‑interface‑to‑realize‑data‑connection‑between‑AutoMax‑DCS‑chassis‑and‑AutoMate‑external‑host‑system
• RS‑232‑serial‑physical‑interface‑provides‑hardware‑link‑for‑AutoMate‑software‑data‑interaction
• Completes‑protocol‑adaptation‑and‑data‑buffer‑forwarding‑between‑AutoMax‑backplane‑bus‑and‑AutoMate‑serial‑link
• Front‑panel‑LED‑indicators‑reflect‑communication‑link‑status‑and‑fault‑condition‑for‑quick‑on‑site‑judgment
• Standard‑AutoMax‑chassis‑plug‑in‑module‑form‑factor‑facilitates‑installation‑and‑maintenance‑replacement‑work
• Supports‑external‑AutoMate‑host‑to‑read‑AutoMax‑system‑process‑data‑and‑send‑control‑commands‑to‑AutoMax‑system‑through‑this‑module
• Application Scenarios: Legacy‑AutoMax‑DCS‑system‑connecting‑to‑AutoMate‑host‑monitoring‑and‑configuration‑software;‑retrofit‑and‑spare‑parts‑maintenance‑of‑old‑industrial‑control‑systems‑in‑metallurgy‑chemical‑and‑paper‑making‑industry;‑on‑site‑debug‑and‑data‑interaction‑scenarios‑between‑AutoMax‑control‑chassis‑and‑external‑AutoMate‑host‑equipment
• Performance Parameters: Stable‑serial‑port‑data‑transmission‑rate‑matching‑AutoMate‑communication‑protocol‑timing‑requirement;‑real‑time‑data‑buffer‑forwarding‑between‑backplane‑bus‑and‑serial‑port;‑link‑fault‑state‑visual‑feedback‑via‑LED‑indicators.
• Material Composition: Multi‑layer‑printed‑circuit‑board‑with‑serial‑communication‑controller‑chip‑and‑AutoMax‑bus‑interface‑circuit;‑reinforced‑plastic‑module‑housing‑frame;‑gold‑plated‑edge‑connector‑for‑AutoMax‑chassis‑backplane‑bus‑connection;‑front‑panel‑RS‑232‑connector‑and‑status‑LED‑assembly.
• Structural Characteristics: Standard‑AutoMax‑chassis‑plug‑in‑card‑module‑structure;‑rear‑side‑gold‑plated‑edge‑connector‑inserts‑into‑main‑chassis‑backplane‑slot;‑front‑panel‑equipped‑with‑RS‑232‑interface‑connector‑and‑group‑of‑communication‑status‑LED‑indicators;‑module‑front‑side‑fixing‑screws‑for‑locking‑in‑chassis‑slot.
• Working Principle: After‑power‑on‑initialization,‑module‑establishes‑hardware‑connection‑with‑AutoMax‑chassis‑backplane‑bus;‑receives‑data‑from‑AutoMax‑processor‑via‑backplane‑bus‑and‑converts‑into‑serial‑data‑format‑suitable‑for‑AutoMate‑protocol‑and‑output‑via‑RS‑232‑port‑to‑external‑AutoMate‑host‑system;‑meanwhile‑receives‑command‑and‑data‑sent‑from‑AutoMate‑host‑and‑transmits‑back‑to‑AutoMax‑processor‑through‑backplane‑bus‑after‑protocol‑conversion‑processing.
• Installation Requirements: Insert‑module‑into‑vacant‑slot‑of‑AutoMax‑main‑chassis‑under‑power‑off‑condition;‑tighten‑front‑panel‑fixing‑screws‑to‑ensure‑reliable‑contact‑between‑edge‑connector‑and‑chassis‑backplane‑bus;‑use‑qualified‑RS‑232‑serial‑cable‑to‑connect‑front‑panel‑interface‑to‑AutoMate‑host‑equipment‑serial‑port;‑complete‑relevant‑communication‑parameter‑configuration‑in‑AutoMax‑system‑software.