HYBRICON PCI354-1022-38 - Image 1
HYBRICON PCI354-1022-38 - Image 2
HYBRICON PCI354-1022-38 - Image 3
Click to enlarge
HYBRICON PCI354-1022-38
HYBRICON PCI354-1022-38 - Image 2
HYBRICON PCI354-1022-38 - Image 3
Schneider PC-E984-685
Schneider PC-E984-685
Back to products
EMERSON NTE207-CBNS-0000
EMERSON NTE207-CBNS-0000

HYBRICON PCI354-1022-38

Product Name:​ Hybricon PCI354-1022-38 PCI Interface / I/O Board
Product Introduction:​ A Hybricon (formerly part of Curtiss-Wright / Naval embedded systems line) PCI-format board, typically used in industrial PCs, test racks and ruggedized VME/PCI hybrid chassis for digital I/O, serial or custom interface tasks.
Category:
Description
Technical Specifications:
  • Form Factor:​ 3U/6U PCI board (full-height PCI, 32-bit 33 MHz unless stated)
  • Part Number Decoded:​ PCI354 family, 1022-38 revision/variant code
  • Typical I/O (PCI354 class):​ 16–32 TTL/CMOS digital I/O lines, optional differential pairs, on-board FIFO, 5 V signaling, 3.3 V tolerant variants exist
  • Connector:​ 50-pin or 100-pin header / D-sub depending on front panel bracket
  • Driver Support:​ Windows XP/7/10 and Linux kernel modules, vendor C API
  • Power:​ +5 V from PCI edge, +12 V if relay/special front-end fitted
  • Operating Temp:​ 0…+55 °C commercial, -40…+85 °C conformal-coated version possible
  • Mounting:​ Standard PCI slot in desktop/19-inch IPC; bracket secured by screw
    Functional Features:​ Interrupt-driven I/O, programmable direction per port, on-board counter/timer on some PCI354 builds, galvanic isolation only if external conditioning used.
    Application Scenarios:​ Factory test benches, signal routing in ATE systems, bridge between legacy parallel I/O and modern SCADA PC, simulation rigs.
    Installation Notes:​ Disable BIOS-assigned IRQ conflict; install vendor driver before inserting board; use ferrite clamp on ribbon if near VFDs.
    Usage Precautions:​ Board is not 24 V tolerant on direct pins—use external opto-isolator card for field wiring; static discharge can damage unbuffered TTL; do not draw more than 0.5 A total from on-board 5 V rail.
Cross-Brand Notes
  • Saia PCD2.M110 and PCD3.M5540/M6340 share PG5 programming but differ in RISC vs Motorola core; projects are not binary-compatible.
  • PCD3.A465 analog module works in PCD3.C holders driven by M5540/M6340/T760 but not directly in Schneider 984 racks.
  • Schneider PC-E984-685 talks Modbus RTU easily to Saia RS-485 port but has no Ethernet native—add a Modbus/TCP gateway if integrating with PCD3 Ethernet.
  • Hybricon PCI354 sits in the PC layer, often used as the HMI/logger front-end above a Saia or Schneider PLC via serial or OPC.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “HYBRICON PCI354-1022-38”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Amat 0010-44213

  • Precision Performance: Engineered for high-precision control, the AMAT 0010-44213 meets the stringent requirements of semiconductor manufacturing.
  • Environmental Resistance: Operates reliably in high-temperature and high-pressure environments, withstanding harsh industrial conditions.
  • Compatibility: Seamlessly integrates with various semiconductor devices, lithography machines, plasma etching equipment, and other advanced material processing technologies.
  • Interface and Control: Effectively interfaces with AMAT’s equipment modules and control systems, ensuring collaborative operation across the entire production line.
Read more
Quick view

KUKA KSD1-08 Servo Drive Module – Complete Technical Profile

Technical Specifications:
  • The KSD1-08 is part of a series of drive systems tailored for dynamic and efficient operation of robotic arms and similar machinery.
  • It supports various communication protocols essential for integration within complex automation systems.
  • Capable of handling significant power loads while maintaining high efficiency and minimal heat generation, ensuring reliable performance over extended periods.
Read more
Quick view

Motorola IPMC761-002

  • Processor: Equipped with an MPC7450 series PowerPC processor at 1 GHz, with 512 KB of on - chip L2 cache and 2 MB of L3 cache, and an Altivec coprocessor for high - performance computational applications.
  • Memory: Two banks of soldered flash memory.
  • Communication Interfaces: Includes 1 parallel port, 2 asynchronous serial ports, and 2 synchronous/asynchronous serial ports.
  • Bus Type: VME bus.
  • Power Supply: Draws +5 V and +3.3 V through the PMC connectors.
  • Dimensions: 263 × 58 × 28 mm.
  • Weight: 4.3 kg.
Read more
Quick view

ONLINE DEVELOPMENT 56SAM-810

Technical Specifications:
  • Processor: Equipped with a high-performance microprocessor tailored for real-time processing tasks, ensuring efficient operation in demanding environments.
  • Memory: Includes both RAM and flash memory options to facilitate program execution and data storage. The exact size can vary but is typically sufficient for storing application-specific software and temporary data.
  • Communication Interfaces: Supports multiple communication protocols, including serial interfaces (RS-232/485), Ethernet, and possibly fieldbus options like CAN or Modbus, facilitating connectivity with other devices and systems.
  • Input/Output Capabilities: Designed to interface with various sensors, actuators, and control systems through configurable digital and analog input/output channels.
Read more
Quick view

Radisys SBC486DX66 Industrial Single-Board Computer

Technical Specifications (for a typical Radisys SBC):
  • Processor Architecture: High-performance multi-core processors optimized for handling large volumes of session traffic.
  • Memory: Equipped with ample RAM and storage to support real-time processing, session management, and logging activities.
  • Network Interfaces: Multiple Gigabit Ethernet ports supporting SIP, RTP, and other communication protocols to facilitate seamless connectivity between different network segments.
  • Security Features: Comprehensive security measures including encryption, authentication, and denial-of-service protection.
  • Scalability: Designed to scale from small businesses up to large enterprises and service providers, managing thousands of sessions simultaneously.
  • Environmental Tolerance: Built to operate reliably in standard data center environments
Read more
Quick view

SAACKE FSC-01

Technical Specifications:
  • Supply Voltage: 24 V DC (typical), with options for 110–230 V AC in certain configurations
  • Power Consumption: Low power draw, optimized for continuous operation
  • Operating Temperature: -10°C to +55°C
  • Storage Temperature: -25°C to +70°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Protection Rating: IP20 (suitable for indoor panel mounting)
  • Input Compatibility: Accepts signals from flame detectors including UV, IR, and ionization sensors
  • Output Relays: Equipped with safety-rated relay outputs for burner activation, alarm signaling, and system shutdown
Read more
Quick view

TOSHIBA GBU648E-S

  • Slot Capacity: Supports up to 8 modules, allowing flexible configuration with TOSHIBA’s EX10 series components (e.g., power supplies, CPUs, I/O units).
  • Power Supply Compatibility: Works with modules like PS261 (power supply) and PU11A (CPU), ensuring stable energy distribution and control logic execution.
  • Communication Modules: Integrates with Profibus DP modules (e.g., GPF611-S) for seamless connectivity with field devices, enabling real-time data exchange in industrial networks.
  • Analog/Digital Modules: Compatible with GAD668-S (analog input) and GDA664-S (analog output) modules, supporting high-precision signal processing for sensors and actuators.
  • Physical Design: Compact, rack-mounted structure optimized for space efficiency in control panels.
Read more
Quick view

Yaskawa CACR-SR07BE12M

  • Input Voltage: Three - phase AC 200V - 230V
  • Output Current: 7A
  • Output Power: 1.5kW or 0.75kW
  • Control Method: Vector control
  • Communication Interface: RS - 485
  • Protection Level: IP20
  • Output Frequency Range: 0.1 - 400Hz
  • Overload Capacity: 150% of the rated current for 60 seconds
  • Dimensions: 150mm * 240mm * 350mm
  • Weight: Approximately 1.14kg
Read more
Quick view