FOXBORO RH916NC - Image 1
Click to enlarge
FOXBORO RH916DD
FOXBORO RH916DD
Back to products
FOXBORO FBM242 RH916T
FOXBORO FBM242 RH916T

FOXBORO RH916NC

Product Name:​ RH916NC Termination Assembly Variant
Product Introduction:​ RH916NC is the same mechanical TA platform as RH916DD but with a normally-closed relay logic orientation and alternate keying. It is used where the plant standard calls for NC-form relay confirmation on discrete outputs or where cable exit direction differs in dense cabinets.
Category:
Description
Technical Specification:
  • Channels: 16, mapped to FBM242
  • Relay Form: NC/NO selectable per channel via jumper field on some revisions
  • Field Voltage: Same multi-voltage range as FBM242 (15–60 VDC, 120 VAC, 240 VAC)
  • Isolation: Inherited from FBM242 channel isolation; TA adds 600 VAC creepage spacing
    Material Composition:​ Identical to RH916DD; thermoplastic, brass, stainless.
    Structural Feature:​ Different mechanical key vs DD so an FBM configured for NO logic cannot be forced into an NC-standard TA without deliberate retrofit.
    Working Principle:​ Identical signal path to RH916DD; difference is default relay contact state and wiring legend on the cover sheet.
    Installation Requirement:​ Same DIN/cabinet rules as RH916DD. Confirm NC/NO jumpers before coupling to solenoid valves that fail unsafe on loss of power.
    Usage Note:​ Never assume NC means “safe de-energized”; FBM242 fail-safe config and TA relay form must be reviewed together.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “FOXBORO RH916NC”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

FOXBORO A2H124-24FX Industrial Managed Switch

The FOXBORO A2H124-24FX (also referred to as the Enterasys A2H124-24FX) is a Layer 2 managed Ethernet switch designed for industrial and enterprise networks. Manufactured by Enterasys Networks (now part of Extreme Networks), this switch combines high-performance connectivity with robust security and scalability.
Read more
Quick view
Placeholder

Foxboro E69F-BI2-MS Pneumatic Signal Converter

Technical Specifications
  • Accuracy
    • Output signal codes 2 and 3: ±1.0% of full scale
    • Output signal codes 7 and 8: ±2% of full scale
  • Linearity
    • ±0.5% of full scale, typical
  • Repeatability
    • ±0.25% of full scale, typical
  • Hysteresis
    • ±0.5% of full scale, typical
  • Supply Pressure Effect
    • Change in supply pressure causes zero shift of less than 0.04% of full scale/kPa
  • Ambient Temperature Effect
    • Over an operating range of 0 to 60°C (32 to 140°F), a 28°C (50°F) change in ambient temperature causes zero and span shifts of ±1% of full scale or less
  • Inclination Effect
    • A 5 - degree change in vertical inclination results in a maximum zero displacement of 0.25% of full scale
  • Shock Effect
    • At a shock test level of 300 m/s² (30 “g”) measured at the feedback bracket, the maximum zero displacement is 0.5% of full scale
Read more
Quick view

Foxboro FBM201 Analog Input Interface Module

Technical Specifications
  • Channels: 8 isolated and independent channels
  • Input Signal Range: 0 - 20 mA DC, 0 - 100 mV DC, 0 - 5 V DC, 0 - 10 V DC
  • Accuracy: ±0.1% of full scale
  • Resolution: 16 - bit (0.0015% accuracy)
  • Isolation Voltage: 1500V AC (between channels)
  • Operating Temperature: - 40°C to 70°C
  • Power Supply: 24VDC ±10%
  • Dimensions: 10.4 cm x 4.5 cm x 11.4 cm
  • Weight: 0.284 kg
Read more
Quick view

Foxboro FBM203 Foundation Fieldbus Analog Input Module

Product Type: 8-Channel Foundation Fieldbus H1 Analog Input Module Overview: The Foxboro FBM203 is an 8-channel analog input module for the Foxboro FBM Series Foundation Fieldbus system. It accepts 4–20 mA DC signals from field transmitters (pressure, temperature, level, flow) and communicates the digitized values to the DCS controller via the Foundation Fieldbus H1 segment. The module also supports HART communication for smart transmitter configuration.
Read more
Quick view

Foxboro FBM218 — 8-Channel Analog Output Module

Product Series: Foxboro I/A Series Fieldbus Module (FBM) — Analog Output Product Introduction: The FBM218 is an 8-channel analog output module that generates 4–20 mA current loop outputs (or 1–5 VDC voltage outputs) to control final control elements including control valves, VSDs, and dampers. It is the standard 8-channel output module in the Foxboro I/A Series FBM family and provides precise, isolated analog output signals for process control applications.
Read more
Quick view

FOXBORO FCP270

The FOXBORO FCP270 (Field Control Processor 270) is a distributed, fault-tolerant controller designed for industrial process automation. As part of the I/A Series Distributed Control System (DCS) by Foxboro (now Schneider Electric), it executes real-time control logic, data acquisition, and alarm management in harsh environments.
Read more
Quick view

FOXBORO H92904CC0500 Multi-Function Industrial Module

Technical Specifications:
  • The H92904CC0500 module is designed to manage digital inputs and outputs, facilitating communication between field devices and the control system.
  • It supports standard voltage levels, typically including 24V DC, which is common in industrial environments for interfacing with sensors and actuators.
  • Capable of operating under various environmental conditions, ensuring stability and reliability in harsh industrial settings.
  • Features isolation techniques that protect against electrical noise and transient voltages, ensuring accurate signal processing.
Read more
Quick view

FOXBORO STK-RPS-150PS redundant power supply module

Technical Specifications

  • Input Power Range: 100 - 240V
  • Line Frequency: 50 - 60 Hz
  • Output Power: 150W
  • Output Voltage: 12V DC
  • Output Current: 1A, 8.5A, 13A
  • Form Factor: Standalone
  • Hot - Pluggable: Yes
  • Protection Class: IP20
  • Dimensions: 483 x 483 x 300 mm
  • Weight: 25 kg
Read more
Quick view