Jetter JM-204-480-OEM-S1 - Image 1
Jetter JM-204-480-OEM-S1 - Image 2
Click to enlarge
Jetter JM-204-480-OEM-S1
Jetter JM-204-480-OEM-S1 - Image 2
Yaskawa JAPMC-CP2230-E
Yaskawa JAPMC-CP2230-E
Back to products
Yaskawa JRMSI-120XBP01200
Yaskawa JRMSI-120XBP01200

Jetter JM-204-480-OEM-S1

  • Product Name: JetMove 204-480 Digital Servo Amplifier (OEM Version with STO)
  • Product Introduction: A compact digital servo drive from Jetter (now part of Bosch Rexroth ecosystem) for controlling synchronous servo motors, asynchronous motors, and stepper motors in closed control cabinets.
Category:
Description
  • Technical Specifications:
    • Power Section: 3-phase AC 340…530 V (DC Link voltage dependent)
    • Current Rating: 4 A continuous / 8 A peak (model specific to 204-480 rating)
    • Control Supply: DC 24 V
    • Feedback Support: Resolver, EnDat 2.2, SSI, Incremental Encoder
    • Option: -S1 indicates Safe Torque Off (STO) compliance.
  • Functional Features:
    • Torque, speed, and position control loops.
    • JX2 system bus interface for communication with Jetter CPUs.
    • Integrated braking chopper capability.
    • DIP switch configuration for basic setup without software.
  • Application Scenarios: Conveyors, production machinery, handling systems.
  • Use Precautions: Must be installed in a closed control cabinet. The -S1 STO option is required for safety-related deactivation but the base unit is not a safety-rated device unless properly integrated. Phase wiring must match motor voltage rating strictly.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Jetter JM-204-480-OEM-S1”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

CCC TIOC-555HD

Technical Specifications

There is currently no specific and detailed technical specification information available for the CCC TIOC - 555HD. However, based on similar products such as the CCC IOC - 555 - D, it may have the following characteristics:
  • Communication Interface: May support RS - 485 communication.
  • I/O Channels: It is possible to have multiple digital inputs and outputs, as well as analog inputs and outputs. For example, the IOC - 555 - D has 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs.
Read more
Quick view

CONTROL 9180B-8

  • Power Supply: Supports AC 220V/50Hz or DC 24V, depending on design requirements.
  • Communication Interfaces: Equipped with RS-485, Ethernet, and Modbus protocols for seamless integration with other devices or systems.
  • Processor: High-performance CPU ensures rapid response and accurate control.
  • Protection Rating: IP65 or higher for dust and water resistance, suitable for harsh industrial conditions.
  • Operating Temperature: Wide temperature range to adapt to diverse industrial settings.
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

KONGSBERG MRU-E-JB3

Technical Specifications:
  • Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
  • Accuracy: High accuracy across all axes with minimal latency
  • Update Rate: Configurable up to 100 Hz for real-time applications
  • Operating Voltage: Typically 12 to 36 VDC
  • Power Consumption: Low power consumption suitable for extended operation
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -50°C to +85°C
  • Humidity Range: 0% to 100% relative humidity, waterproof design
  • Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
  • Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration
Read more
Quick view

KUKA KSD1-08 Servo Drive Module – Complete Technical Profile

Technical Specifications:
  • The KSD1-08 is part of a series of drive systems tailored for dynamic and efficient operation of robotic arms and similar machinery.
  • It supports various communication protocols essential for integration within complex automation systems.
  • Capable of handling significant power loads while maintaining high efficiency and minimal heat generation, ensuring reliable performance over extended periods.
Read more
Quick view

PARKER AR-04AE-13574

Functional Characteristics High – Performance: Provides high – torque output and fast response, enabling precise control of servo motors. Easy
Read more
Quick view

REXROTH VT-VPCD-1-16/V0/1-P-1 R901089559

Product Introduction

The REXROTH VT - VPCD - 1 - 16/V0/1 - P - 1 (R901089559) is a state - of - the - art digital control electronics module. It is specifically designed for the precise control of axial piston pumps, especially the AVS type with HS control. This module plays a crucial role in managing the swivel angle, pressure control, and power limitation of the pump through an electrically controlled proportional valve.
Read more
Quick view

ZYGO ZMI-2002 8020-0211-1-J Precision Measurement System

Technical Specifications:
  • The ZMI-2002 operates based on innovative interferometry principles, offering nanometer-level precision for surface form measurements.
  • It supports a wide range of optical configurations to accommodate diverse measurement needs.
  • Capable of providing high-resolution data, which ensures accurate characterization of surfaces and components.
Read more
Quick view