HIMA F3AIO8401

Product Name: HIMA F3 AIO 84 01 Analog/Digital Mixed I/O Module
Product Introduction: Safety-related mixed analog and digital input/output expansion module designed for HIMA HIMatrix F3 series safety PLC systems and SIL-rated safety instrumented systems (SIS).

Category: HIMA

Description

Technical Specifications:
- Operating Voltage: 24 V DC (±15% to +20%)
- Analog Input Channels: 8 channels (configurable 0-10 V DC or 4-20 mA, >2 MΩ input resistance)
- Analog Output Channels: 4 channels (configurable 0-10 V DC or 4-20 mA)
- Digital I/O: 8 DI / 8 DO (depending on specific firmware configuration, primary focus is AIO)
- Resolution: 12-bit (Analog Input), 12-bit (Analog Output)
- Accuracy: ±0.1% FS at 25°C, ±0.5% FS full temperature range
- Communication Interface: RS-485 (Modbus RTU) / F3 System Bus
- Response Time: ≥ 20 ms
- Operating Temperature: 0°C to +60°C (storage: -40°C to +85°C)
- Power Consumption: Idle approx. 0.4 A, max load 0.8 A at 24 V DC
Functional Features: Integrated signal acquisition and output; channel-level diagnostics for open-circuit, short-circuit; supports software configuration of signal types without hardware changes; SafeEthernet compatibility in F3 architecture.
Performance Parameters: Sampling time approx. 45 µs; measurement refresh per controller cycle; safety-related accuracy max ±2% of final value.
Material Composition: Metal housing providing mechanical protection and EMI shielding; PCB with conformal coating for industrial environments.
Structural Characteristics: Compact modular design for 35 mm DIN rail mounting; spring clamp terminals or screw-type terminals; integrated status LEDs (RUN, FAULT, channel status).
Working Principle: Converts analog field signals via ADC for safety logic solver processing and converts digital results to analog via DAC; digital I/O isolated via optocouplers; continuous self-diagnostics monitor integrity of conversion circuits.
Advantages: Reduces wiring complexity by combining AI/AO in one module; SIL 3 capable design (redundant circuits); high diagnostic coverage; compatible with SILworX engineering tool.
Applicable Industries: Chemical, Petrochemical, Oil & Gas, Pharmaceutical, Power Generation, Rail Signaling.
Model Series: HIMA HIMatrix F3 Series (F3 AIO 8/4 01 variant naming).
Installation Requirements: Install on 35 mm DIN rail inside control cabinet (IP20); ensure 24 V DC supply with safe isolation per IEC 61131-2; ground earth terminal properly.
Usage Precautions: Do not mix voltage/current configuration without software verification; ensure external fusing 10 A time-lag; avoid operation outside 0°C to +60°C without derating; verify polarity during wiring to prevent damage.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “HIMA F3AIO8401”

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.