Bosch Rexroth VT-VRPA1-50-1X/V0 R900952202 - Image 1
Bosch Rexroth VT-VRPA1-50-1X/V0 R900952202 - Image 2
Bosch Rexroth VT-VRPA1-50-1X/V0 R900952202 - Image 3
Click to enlarge
Bosch Rexroth VT-VRPA1-50-1X/V0 R900952202
Bosch Rexroth VT-VRPA1-50-1X/V0 R900952202 - Image 2
Bosch Rexroth VT-VRPA1-50-1X/V0 R900952202 - Image 3
KOLLMORGEN S20260-VTS
KOLLMORGEN S20260-VTS
Back to products
Bosch Rexroth MSK040C-0600-NN-M1-UG1-NNNN R911306061
Bosch Rexroth MSK040C-0600-NN-M1-UG1-NNNN R911306061

Bosch Rexroth VT-VRPA1-50-1X/V0 R900952202

  • Product Name:​ Euro-card format analog amplifier for proportional flow / pressure control valves (FE, FES, DBETR, 2FRE series)
  • Part Number:​ R900952202 (VT-VRPA1-50-1X/…)
  • Product Type:​ Analog electronic amplifier card, European card format 100×160 mm (DIN 41494)
Category:
Description
  • Product Type:​ Analog electronic amplifier card, European card format 100×160 mm (DIN 41494)
  • Function / Working Principle:​ Receives a 0–±10 V or 4–20 mA command signal from a PLC / controller, processes it through a ramp generator and PID position controller, then drives the proportional solenoid coil with a regulated current output. Includes inductive position transducer oscillator/demodulator for valves with electrical position feedback.
  • Key Technical Specs:
    • Supply Voltage:​ 24 V DC (reverse polarity protected)
    • Solenoid Output Current:​ up to ~1.2–2.0 A (valve dependent)
    • Command Input:​ Differential input, switchable 0–+10 V / 0–20 mA / 4–20 mA via jumper
    • Ramp Time:​ Adjustable via front potentiometers; typ. 0.02–5 s or 0.2–50 s (jumper selectable)
    • Internal Supply:​ ±9 V generated internally (max. 25 mA external load)
    • Indicators:​ Green LED = ready for operation; Yellow LED = enable active
    • Connectors:​ 32-pin or 48-pin edge connector
    • Operating Temp.:​ 0 °C to +50 °C (some versions up to +70 °C)
    • Protection:​ Short-circuit protection on output stage, wire-break detection
  • Features:​ Zero-point & gain trim potentiometers, separate up/down ramp adjustment, enable input, “ramp off” input, measurement sockets for command & actual value, plug-in jumpers for valve type configuration.
  • Application:​ Hydraulic press control, injection molding machines, test rigs — anywhere proportional flow/pressure valves require precise closed-loop control.
  • Installation Notes:​ Mount in standard Euro-card rack; ensure proper shield grounding of solenoid cables; set jumpers before power-up per target valve datasheet.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bosch Rexroth VT-VRPA1-50-1X/V0 R900952202”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

BENDER IRDH575B1W-435

Technical Specifications:
    • Rated Voltage: Up to 690 V AC, 24–300 V DC
    • Measuring Range: 0 to 999 kΩ (depending on voltage level)
    • Response Time: Rapid detection time for insulation faults
    • Operating Temperature: -10°C to +60°C
    • Storage Temperature: -25°C to +70°C
    • Humidity Range: 0% to 95% relative humidity, non-condensing
    • Communication Interfaces: RS-485, Modbus RTU, Ethernet interface for network integration
    • Display: LCD display for status indication and parameter setting
Read more
Quick view

Fireye 45UV5-1101

Technical Specifications:
  • Detection Type: Ultraviolet (UV)
  • Sensing Distance: Effective sensing distance up to several meters, depending on flame size and intensity
  • Operating Voltage: Typically operates on 24 VDC
  • Power Consumption: Low power consumption suitable for energy-efficient applications
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -40°C to +85°C
  • Humidity Range: 0% to 95% relative humidity, non-condensing
Read more
Quick view

KONGSBERG MRU-E-JB3

Technical Specifications:
  • Measurement Axes: 6 DOF (Degrees of Freedom) - heave, surge, sway, roll, pitch, and yaw
  • Accuracy: High accuracy across all axes with minimal latency
  • Update Rate: Configurable up to 100 Hz for real-time applications
  • Operating Voltage: Typically 12 to 36 VDC
  • Power Consumption: Low power consumption suitable for extended operation
  • Operating Temperature: -40°C to +70°C, ensuring performance in extreme environments
  • Storage Temperature: -50°C to +85°C
  • Humidity Range: 0% to 100% relative humidity, waterproof design
  • Environmental Protection: IP68 rated for underwater use and protection against dust and water ingress
  • Communication Interfaces: RS-232, RS-422, Ethernet, NMEA 0183, and others depending on configuration
Read more
Quick view

MOLEX SST-PFB-SLC

Product Introduction

The MOLEX SST-PFB-SLC is a Profibus scanner module designed for use with the Allen-Bradley SLC 500 controller series. It is manufactured by SST, a brand under Molex. The module enables communication between an SLC processor (SLC 5/03 or later) and DP remote I/O devices on a Profibus network, acting as a Profibus DP remote I/O scanner.
Read more
Quick view

ONLINE DEVELOPMENT 56SAM-810

Technical Specifications:
  • Processor: Equipped with a high-performance microprocessor tailored for real-time processing tasks, ensuring efficient operation in demanding environments.
  • Memory: Includes both RAM and flash memory options to facilitate program execution and data storage. The exact size can vary but is typically sufficient for storing application-specific software and temporary data.
  • Communication Interfaces: Supports multiple communication protocols, including serial interfaces (RS-232/485), Ethernet, and possibly fieldbus options like CAN or Modbus, facilitating connectivity with other devices and systems.
  • Input/Output Capabilities: Designed to interface with various sensors, actuators, and control systems through configurable digital and analog input/output channels.
Read more
Quick view

Radisys SBC486DX66 Industrial Single-Board Computer

Technical Specifications (for a typical Radisys SBC):
  • Processor Architecture: High-performance multi-core processors optimized for handling large volumes of session traffic.
  • Memory: Equipped with ample RAM and storage to support real-time processing, session management, and logging activities.
  • Network Interfaces: Multiple Gigabit Ethernet ports supporting SIP, RTP, and other communication protocols to facilitate seamless connectivity between different network segments.
  • Security Features: Comprehensive security measures including encryption, authentication, and denial-of-service protection.
  • Scalability: Designed to scale from small businesses up to large enterprises and service providers, managing thousands of sessions simultaneously.
  • Environmental Tolerance: Built to operate reliably in standard data center environments
Read more
Quick view

SAACKE FSC-01

Technical Specifications:
  • Supply Voltage: 24 V DC (typical), with options for 110–230 V AC in certain configurations
  • Power Consumption: Low power draw, optimized for continuous operation
  • Operating Temperature: -10°C to +55°C
  • Storage Temperature: -25°C to +70°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Protection Rating: IP20 (suitable for indoor panel mounting)
  • Input Compatibility: Accepts signals from flame detectors including UV, IR, and ionization sensors
  • Output Relays: Equipped with safety-rated relay outputs for burner activation, alarm signaling, and system shutdown
Read more
Quick view

TOSHIBA GBU648E-S

  • Slot Capacity: Supports up to 8 modules, allowing flexible configuration with TOSHIBA’s EX10 series components (e.g., power supplies, CPUs, I/O units).
  • Power Supply Compatibility: Works with modules like PS261 (power supply) and PU11A (CPU), ensuring stable energy distribution and control logic execution.
  • Communication Modules: Integrates with Profibus DP modules (e.g., GPF611-S) for seamless connectivity with field devices, enabling real-time data exchange in industrial networks.
  • Analog/Digital Modules: Compatible with GAD668-S (analog input) and GDA664-S (analog output) modules, supporting high-precision signal processing for sensors and actuators.
  • Physical Design: Compact, rack-mounted structure optimized for space efficiency in control panels.
Read more
Quick view