ALSTOM UMT162 CS-C3 - Image 1
ALSTOM UMT162 CS-C3 - Image 2
ALSTOM UMT162 CS-C3 - Image 3
Click to enlarge
ALSTOM UMT162 CS-C3
ALSTOM UMT162 CS-C3 - Image 2
ALSTOM UMT162 CS-C3 - Image 3
ALSTOM UT150-1
ALSTOM UT150-1
Back to products
Vibro-Meter VC-920
Vibro-Meter VC-920

ALSTOM UMT162 CS-C3

Manufacturer:​ ALSTOM (GE Power heritage) — UMT series
Product Brief:​ A microprocessor-based, high-integrity protection relay for continuous monitoring of vibration (radial / axial), shaft displacement, and rotor speed on steam, gas, and hydro turbines. Provides Alarm and Trip relay outputs with self-diagnostics.
Category:
Description
Technical Specifications
  • Input Channels:​ 2 independent dynamic channels (proximity probe / velocity pickup); 1 tachometer / speed input
  • Sensor Compatibility:​ –24 V DC eddy-current proximity probes (BN-style); seismic velocity sensors (100 mV/mm/s typical); TTL / Namur tacho
  • Frequency Range:​ 0.5 Hz – 1 kHz (configurable per application)
  • Measurement Accuracy:​ ±1 % FS
  • Output Relays:​ 2 × programmable Alert relays (Form C), 2 × Danger/Trip relays (Form C, 5 A @ 250 V AC); latching or non-latching selectable
  • OK Monitoring:​ Separate watchdog/OK relay for internal self-test & sensor supply supervision
  • Communication:​ RS-485 Modbus RTU; front RS-232 for local config via PC
  • Power Supply:​ 24–250 VDC or 85–265 VAC, 50/60 Hz (dual-isolated option available)
  • Operating Temp.:​ –20 °C to +70 °C
  • Enclosure:​ Typically panel-mount or 19″ rack adapter; approx. 160 × 160 × 230 mm (W×H×D)
  • Compliance:​ IEC 60255, IEEE C37.90, CE
Features
  • Dual-channel signal processing with fail-safe logic
  • Configurable alarm delay (0–100 s) to avoid nuisance trips
  • Trend data and event logging for predictive maintenance
  • Integrates with ALSTOM Alspa™ and GE Mark VIe architectures
Installation & Notes
  • Mount in control cabinet away from strong EMI sources
  • Use properly calibrated proximity probe extension cables matching the probe’s scale factor (typically 200 mV/mil or 7.87 mV/µm)
  • Earth the transducer system at one point only to prevent ground loops
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ALSTOM UMT162 CS-C3”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

ALSTOM 3EST125-975 DCC2382A

  • Power Supply Voltage: 24 VDC, 48 VDC, 110/220 VAC (depending on the model)
  • Input Signal: Analog/digital signal (depending on the model)
  • Output Signal: Analog/digital signal, relay output (depending on the model)
  • Communication Interface: RS232, RS485, Ethernet, IEC 61850, etc. (depending on the model)
  • Operating Temperature Range: -40°C to +85°C (industrial grade)
  • Protection Level: IP20 or higher (depending on the model)
  • Mounting Method: Rack mounting, DIN rail mounting (depending on the model)
Read more
Quick view

Alstom ALE111-S50

Product Overview

ALE111-S50 is a DCS rack-mounted Ethernet communication coupler facilitating 10 Mbps 10Base-T data exchange between CENTUM VP FCU field control units and remote plant monitoring stations over standard copper twisted-pair Ethernet wiring. It is deployed for non-hazardous general industrial control cabinet environments without corrosive gas exposure.
Read more
Quick view

ALSTOM AS111-1 Analog Output Module

Technical Specifications:
  • Output Channels: 8 channels
  • Output Signal Types:
    • Current: 0–20 mA or 4–20 mA
    • Voltage: 0–10 V
  • Supply Voltage: 24 V DC (operating range: 19.2–30 V)
  • Signal Accuracy: Industrial-grade precision, suitable for precise process control
  • Isolation: Analog and digital circuits are isolated to enhance system anti-interference capabilities
  • Feedback Mechanism: Built-in loop self-check function for output monitoring and calibration
  • Dimensions: Approximately 26.5 × 2.6 × 26.5 cm
  • Weight: Approximately 0.53 kg
Read more
Quick view

ALSTOM AS111-1 Analog Output Module / Control Motherboard

Technical Specifications:
  • Output Channels: 8 channels
  • Output Signal Types:
    • Current: 0–20 mA or 4–20 mA
    • Voltage: 0–10 V
  • Supply Voltage: 24 VDC (operating range: 19.2–30 VDC)
  • Signal Precision: Industrial-grade accuracy compliant with precision process control standards
  • Isolation: Analog and digital circuits are isolated to enhance system抗干扰能力 (anti-interference capability)
  • Feedback Mechanism: Built-in loop self-checking for output monitoring and calibration
  • Dimensions: Approximately 26.5 × 2.6 × 26.5 cm
  • Weight: Approximately 0.53 kg
  • Communication Protocols: Supports multiple industrial protocols, including CAN, RS485, RS232, and standard bus interfaces
  • Processor: High-performance ARM Cortex-A9 (for railway applications) with 1GB DDR3 memory and 128MB NOR flash
Read more
Quick view

ALSTOM EP3-E-4-A

Technical Specifications:
  • Supply Voltage: 24 to 250 V DC or AC, allowing flexible integration into various control systems
  • Power Consumption: Low power draw, optimized for continuous operation
  • Operating Temperature: -25°C to +70°C
  • Storage Temperature: -40°C to +85°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Mounting Type: DIN rail mounting
  • Protection Rating: IP20 (front panel), suitable for indoor panel installation
  • Terminal Type: Spring clamp or screw terminals for secure wiring
  • Certifications: Complies with relevant IEC, EN, and UL standards for industrial control equipment
Read more
Quick view

ALSTOM EP3-E-4-A Controller Module

Technical Specifications:
  • Input Voltage: AC 220V/380V
  • Control Interface: RS485, Modbus protocols
  • Operating Temperature: -20°C to +55°C
  • Communication: Supports multi-protocol compatibility and flexible configuration
  • Diagnostic Features: Self-diagnosis and remote monitoring capabilities
  • Component Quality: Industrial-grade hardware for durability
Read more
Quick view

ALSTOM N897164610L Control and Protection Module

echnical Specifications:
  • Voltage Rating: Supports a wide range of operating voltages, typically compatible with medium-voltage (MV) and high-voltage (HV) systems.
  • Current Rating: Designed to handle high current levels, ensuring robust performance in demanding industrial environments.
  • Communication Protocols: Supports standard industrial communication protocols such as Modbus, IEC 61850, and Profibus for seamless integration with SCADA systems and other control devices.
  • Input/Output (I/O) Channels: Equipped with multiple digital and analog I/O channels for connecting sensors, actuators, and other field devices.
  • Protection Functions: Includes overcurrent, overvoltage, undervoltage, differential, and distance protection capabilities.
  • Environmental Resistance: Operates reliably in temperatures ranging from -20°C to +70°C and is resistant to humidity, dust, and vibration.
  • Physical Dimensions: Compact and rugged design suitable for installation in control panels or outdoor enclosures.
Read more
Quick view

ALSTOM N897164611M Industrial Control Module

Technical Specifications:
  • Input/Output (I/O) Channels: Supports multiple digital and analog I/O channels for connecting sensors, actuators, and other field devices.
  • Communication Protocols: Compatible with Modbus, Profibus, and IEC 61850 for seamless integration with SCADA systems and industrial networks.
  • Ethernet Connectivity: Optional Ethernet port for high-speed data transmission and remote configuration.
  • Auto-Calibration: Features automatic verification and calibration for unattended or remote operation.
  • Fault Logging: Maintains a history of faults and calibration records for diagnostic purposes.
  • Relay Functions: Provides NAMUR-compliant relay outputs for transmitting alarm levels and maintenance messages.
  • Environmental Resistance: Operates in temperatures ranging from -20°C to +70°C and is resistant to humidity, dust, and vibration.
  • Physical Dimensions: Compact and rugged design suitable for installation in control panels or outdoor enclosures.
Read more
Quick view