BOSCH REXROTH VT-MACAS-500-10/V0/I - Image 1
BOSCH REXROTH VT-MACAS-500-10/V0/I - Image 2
BOSCH REXROTH VT-MACAS-500-10/V0/I - Image 3
Click to enlarge
BOSCH REXROTH VT-MACAS-500-10/V0/I
BOSCH REXROTH VT-MACAS-500-10/V0/I - Image 2
BOSCH REXROTH VT-MACAS-500-10/V0/I - Image 3
Matrox XSL514
Matrox XSL514
Back to products
BOSCH REXROTH VT-TSPD-1-1X/V00 R900208591
BOSCH REXROTH VT-TSPD-1-1X/V00 R900208591

BOSCH REXROTH VT-MACAS-500-10/V0/I

Product Name:​ Analog Position / Velocity Closed-Loop Controller — Proportional Amplifier (MACAS Series)
Product Introduction:
Designed for closed-loop position or speed control of hydraulic cylinders and servo valves. Receives command values (±10 V or 4–20 mA) from a PLC and compares them with actual position feedback (potentiometer or LVDT), then drives the proportional valve coil accordingly.
Category:
Description
Key Technical Specifications:
  • Supply Voltage:​ 24 V DC nominal (range 21–40 V DC; also accepts 21–28 V AC rectified, single-phase full-wave)
  • Current Consumption:​ max. 200 mA
  • Command Input:​ ±10 V differential (Ri = 100 kΩ) — or — 4–20 mA (Rsh = 200 Ω) depending on version
  • Feedback Input:​ ±10 V (potentiometer 0–10 V or LVDT)
  • Valve Output:​ ±10 V / max. ±100 mA (valve drive current)
  • Enable Signal:​ 8.5–40 V DC
  • Ramp Time:​ Range I = 0.1–1 s; Range II = 1–10 s
  • Control Modes:​ Position control = PT1; Velocity control = PI (with tachogenerator)
  • Area Ratio Adjustment (AK:AR):​ 1:1 to 1:4
  • Actual Value Trim:​ Zero point –5…+10%; Gain 50…110%
  • Cable Break Detection:​ Yes (actual value line)
  • Short-Circuit Protection:​ Yes on interfaces
  • Isolation / EMC:​ With EMC filter (version /I)
Physical & Installation:
  • Dimensions (W×H×D):​ 86 × 110 × 95.5 mm
  • Mounting:​ DIN rail TH35-7.5 (hat rail) per EN 60715or G32 rail
  • Enclosure:​ IP20
  • Operating Temp.:​ 0 … +70 °C
  • Storage Temp.:​ –20 … +70 °C
  • Weight:​ approx. 0.38 kg
Applications:​ Injection molding machines, hydraulic presses, metallurgy, test rigs — wherever precise hydraulic actuator positioning is required.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BOSCH REXROTH VT-MACAS-500-10/V0/I”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

AMAT 0100-71267 Semiconductor Control Module

echnical Specifications:
  • Compatibility: Designed specifically for integration with Applied Materials' semiconductor processing systems.
  • Electrical Characteristics: Details about voltage requirements, current ratings, and power consumption would be specified in technical documentation tailored to its specific application within the system.
  • Physical Attributes: Dimensions and weight suitable for installation within semiconductor manufacturing equipment, ensuring compatibility with existing hardware and facilitating ease of replacement or maintenance.
  • Environmental Tolerance: Engineered to withstand the demanding conditions inside semiconductor fabrication facilities, including resistance to electromagnetic interference, temperature variations, and particulate matter.
Read more
Quick view

EATON XC-CPU202-EC4M-8DI-6DO-XV

  • Power Supply: 24 V DC, with an input power of 33 W and a supply voltage range of 20.4 - 28.8 V DC.
  • Dimensions: Length/Depth 100 mm, Height 100 mm, Width 60 mm.
  • Weight: 0.25 kg.
  • Processor: ARM 532 MHz.
  • Memory: 4 MB.
  • I/O Configuration: 8 digital inputs (DI) and 6 digital outputs (DO).
  • Communication Interfaces: Ethernet (100 Base - TX/10 Base - T), RS 232, CAN.
  • Certifications: EN 50178, IEC/EN 61131 - 2, EAC.
  • Protection Level: IP20.
  • Ambient Operating Temperature: 0 °C - 55 °C.
  • Ambient Storage Temperature: - 25 °C - 70 °C.
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

MOLEX SST-PFB-SLC

Product Introduction

The MOLEX SST-PFB-SLC is a Profibus scanner module designed for use with the Allen-Bradley SLC 500 controller series. It is manufactured by SST, a brand under Molex. The module enables communication between an SLC processor (SLC 5/03 or later) and DP remote I/O devices on a Profibus network, acting as a Profibus DP remote I/O scanner.
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

ONLINE DEVELOPMENT 56SAM-810

Technical Specifications:
  • Processor: Equipped with a high-performance microprocessor tailored for real-time processing tasks, ensuring efficient operation in demanding environments.
  • Memory: Includes both RAM and flash memory options to facilitate program execution and data storage. The exact size can vary but is typically sufficient for storing application-specific software and temporary data.
  • Communication Interfaces: Supports multiple communication protocols, including serial interfaces (RS-232/485), Ethernet, and possibly fieldbus options like CAN or Modbus, facilitating connectivity with other devices and systems.
  • Input/Output Capabilities: Designed to interface with various sensors, actuators, and control systems through configurable digital and analog input/output channels.
Read more
Quick view

SAACKE FSC-01

Technical Specifications:
  • Supply Voltage: 24 V DC (typical), with options for 110–230 V AC in certain configurations
  • Power Consumption: Low power draw, optimized for continuous operation
  • Operating Temperature: -10°C to +55°C
  • Storage Temperature: -25°C to +70°C
  • Humidity Range: 5% to 95% relative humidity, non-condensing
  • Protection Rating: IP20 (suitable for indoor panel mounting)
  • Input Compatibility: Accepts signals from flame detectors including UV, IR, and ionization sensors
  • Output Relays: Equipped with safety-rated relay outputs for burner activation, alarm signaling, and system shutdown
Read more
Quick view

XP POWER F8B6D4A3G3

Technical Specifications

  • Output Characteristics: It is a quad - output power supply, but specific output voltage and current values are not clearly provided in the existing information.
  • Dimensions: Approximately 15 × 11 × 7 inches (LxWxH).
  • Weight: About 8 lbs.
Read more
Quick view