Foxboro FCP280 RH924YA - Image 1
Foxboro FCP280 RH924YA - Image 2
Click to enlarge
Foxboro FCP280 RH924YA
Foxboro FCP280 RH924YA - Image 2
Foxboro FCM2F2 RH914YZ
Foxboro FCM2F2 RH914YZ
Back to products
HIMA F3330
HIMA F3330

Foxboro FCP280 RH924YA

Product Name:​ Foxboro Evo Field Control Processor 280 — FCP280 (Order Code RH924YA)
Function:​ Core distributed control engine of EcoStruxure Foxboro DCS; executes regulatory, sequential, ladder-logic control and collects data from up to 128 FBMs.
  • Manufacturer:​ Foxboro / Schneider Electric
Category:
Description
  • Processor:​ 32-bit RISC / ARM-based with hardware floating point
  • Memory:​ 128 MB SDRAM (control database + runtime) + 128 MB Flash (checkpoint/images); newer firmware options support 2 GB / 4 GB
  • I/O Capacity:​ Up to 128 × 200-series FBMs; or mixed 100/200-series (max 64 × 100-series per PIO bus); 4 × PIO (HDLC) ports
  • Fieldbus Speed:​ 2 Mbps to 200-series FBMs; 268 kbps backward-compatible to 100-series
  • Network Interface:​ 100 Mbps Ethernet (copper or fiber) to Foxboro Mesh Control Network (FTE / Plant Network)
  • Fault Tolerance:​ Optional redundant pair — two modules run in lockstep, bit-for-bit comparison; automatic bumpless switchover on failure
  • Self-Hosted Mode:​ Can boot and run from local flash checkpoint if host workstation / network is unavailable
  • Online Upgrade:​ Supports OLUG / EOLUG (Online Image Upgrade) without process interruption
  • Display:​ Front-panel LCD for status text + multiple diagnostic LEDs
  • Power Input:​ 24 VDC (redundant) from baseplate
  • Power Dissipation:​ ~11 W (single); ~20 W (redundant pair)
  • Enclosure:​ Die-cast aluminum, G3 harsh-environment conformal coating
  • Operating Temp.:​ -20 °C to +60 °C | Storage:​ -40 °C to +70 °C
  • Humidity:​ 5 %–95 % RH, non-condensing
  • Mounting:​ Foxboro baseplate (horizontal or vertical orientation)
  • Certifications:​ CE, ISA EDSA cybersecurity, cULus
  • Installation Tip:​ Always configure redundant FCP280 pairs on separate power feeds; verify Mesh network cabling (cross-over vs straight-through) per Foxboro topology guidelines before commissioning.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Foxboro FCP280 RH924YA”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Foxboro 2AX-ALM-AR Alarm Annunciator Module

Product Type: Discrete Alarm Processing and Annunciation Module Overview: The Foxboro 2AX-ALM-AR is a dedicated alarm annunciator module designed for the Foxboro I/A Series Distributed Control System (DCS). It processes discrete alarm inputs, provides alarm prioritization, and drives annunciator outputs to alert operators of abnormal process conditions. The module is installed in a standard I/A Series chassis and communicates with the system controller via the I/A Series backplane.
Read more
Quick view

Foxboro 685-069171-100 Pressure Transmitter Component

Product Type: Pressure Transmitter Sensing Element / Internal Module Assembly Overview: The Foxboro 685-069171-100 is a precision pressure sensing component used within Foxboro pressure transmitters. It serves as the core sensing element (diaphragm-based) that converts applied process pressure into an electrical signal. This part number identifies a specific revision of the sensor assembly compatible with Foxboro E-Series and I/A Series transmitter housings.
Read more
Quick view
Placeholder

Foxboro E69F-BI2-MS Pneumatic Signal Converter

Technical Specifications
  • Accuracy
    • Output signal codes 2 and 3: ±1.0% of full scale
    • Output signal codes 7 and 8: ±2% of full scale
  • Linearity
    • ±0.5% of full scale, typical
  • Repeatability
    • ±0.25% of full scale, typical
  • Hysteresis
    • ±0.5% of full scale, typical
  • Supply Pressure Effect
    • Change in supply pressure causes zero shift of less than 0.04% of full scale/kPa
  • Ambient Temperature Effect
    • Over an operating range of 0 to 60°C (32 to 140°F), a 28°C (50°F) change in ambient temperature causes zero and span shifts of ±1% of full scale or less
  • Inclination Effect
    • A 5 - degree change in vertical inclination results in a maximum zero displacement of 0.25% of full scale
  • Shock Effect
    • At a shock test level of 300 m/s² (30 “g”) measured at the feedback bracket, the maximum zero displacement is 0.5% of full scale
Read more
Quick view

Foxboro FBM201 Analog Input Interface Module

Technical Specifications
  • Channels: 8 isolated and independent channels
  • Input Signal Range: 0 - 20 mA DC, 0 - 100 mV DC, 0 - 5 V DC, 0 - 10 V DC
  • Accuracy: ±0.1% of full scale
  • Resolution: 16 - bit (0.0015% accuracy)
  • Isolation Voltage: 1500V AC (between channels)
  • Operating Temperature: - 40°C to 70°C
  • Power Supply: 24VDC ±10%
  • Dimensions: 10.4 cm x 4.5 cm x 11.4 cm
  • Weight: 0.284 kg
Read more
Quick view

Foxboro FBM203 Foundation Fieldbus Analog Input Module

Product Type: 8-Channel Foundation Fieldbus H1 Analog Input Module Overview: The Foxboro FBM203 is an 8-channel analog input module for the Foxboro FBM Series Foundation Fieldbus system. It accepts 4–20 mA DC signals from field transmitters (pressure, temperature, level, flow) and communicates the digitized values to the DCS controller via the Foundation Fieldbus H1 segment. The module also supports HART communication for smart transmitter configuration.
Read more
Quick view

Foxboro FBM218 — 8-Channel Analog Output Module

Product Series: Foxboro I/A Series Fieldbus Module (FBM) — Analog Output Product Introduction: The FBM218 is an 8-channel analog output module that generates 4–20 mA current loop outputs (or 1–5 VDC voltage outputs) to control final control elements including control valves, VSDs, and dampers. It is the standard 8-channel output module in the Foxboro I/A Series FBM family and provides precise, isolated analog output signals for process control applications.
Read more
Quick view

Foxboro FCM10E Fieldbus Interface Module

Technical Specifications
  • Supported Protocols: Foundation Fieldbus H1, Profibus DP
  • Communication Rate: Foundation Fieldbus H1 (31.25 kbps); Profibus DP (up to 12 Mbps)
  • Number of Ports: 2 independent fieldbus ports (for redundant or dual-bus configuration)
  • Power Supply: 24 VDC ±10%
  • Power Consumption: 5 W (typical), 8 W (maximum)
  • Operating Temperature Range: -40°C to +70°C
  • Storage Temperature Range: -40°C to +85°C
  • Relative Humidity: 5% to 95% (non-condensing)
  • Isolation: 1500 V AC galvanic isolation between fieldbus ports and power supply
  • Dimensions: 10.4 cm (W) × 4.5 cm (H) × 11.4 cm (D)
  • Weight: 0.3 kg
Read more
Quick view

ProSoft PLX32-EIP-PND EtherNet/IP to PROFINET Gateway

Functional Features

    1. Bidirectional Data Integration
      • Seamless data mapping between EtherNet/IP™ and PROFINET® I/O controllers without ladder logic programming .
      • Supports 100 configurable commands per client for customized data reads/writes .
    2. High Reliability & Redundancy
      • Dual Ethernet ports enable redundant network topologies, eliminating single-point failures .
      • SD Card Slot: Stores configurations for rapid recovery or transfer between gateways .
Read more
Quick view