Technical Specifications
- Central Processor: Intel Celeron N2807 dual-core low-power CPU
- Base System Memory: 4 GB DDR3L industrial RAM, expandable to 8 GB
- Storage Medium: External accessible microSD card slot, 32 GB industrial SSD onboard
- Display Parameter: 10.4-inch TFT LCD screen, resolution 800 × 600 SVGA
- Touch Input: Analog single-touch resistive touchscreen
- Front Panel Hardware: Integrated membrane function key matrix (0021 configuration)
- Rated Power Supply: 24 VDC ±20%, wide-range industrial power input
- Nominal Power Consumption: ≤32 W full load operation
- Front Protection Grade: IP65 dust and water splash resistant
- Rear Housing Protection: IP20 cabinet internal grade
- Operating Temperature Band: 0 ℃ ~ +55 ℃ continuous operation
- Storage Temperature Limits: -20 ℃ ~ +70 ℃
- Humidity Operating Window: 5% ~ 95% RH non-condensing
- Communication Interfaces: 2 × Gigabit Ethernet RJ45, 4 × USB 2.0, 2 × RS232/485 serial ports, EtherCAT slave/master interface
- Physical Dimension: 280 mm (W) × 210 mm (H) × 65 mm (D)
- Panel Cutout Size: 262 mm × 192 mm standard cabinet opening
- Net Weight: 3.2 kg
Function Features
- Fanless passive aluminum heat sink design eliminating rotating mechanical components
- IP65 front panel fully sealed against workshop dust, coolant splash and cleaning water
- Integrated EtherCAT master communication interface for direct servo drive and I/O terminal control
- Windows Embedded Standard / TwinCAT 3 real-time PLC runtime pre-compatible
- External microSD card slot accessible from rear panel for program backup and OS recovery
- Membrane physical function keys for one-touch machine operation without touchscreen interaction
- Multi-protocol industrial communication support: Modbus TCP, Modbus RTU, Profinet, OPC UA
- Complete system hardware self-monitoring: CPU temperature, storage health, power supply voltage alarm
Performance Parameters
- CPU base clock frequency: 1.58 GHz dual-core
- TwinCAT real-time cycle minimum: 100 μs deterministic control cycle
- Display brightness: 400 cd/m² industrial high-brightness TFT panel
- Touchscreen operating life: 10 million single-touch actuation cycles
- SSD service life: 60,000 power-on hours continuous operation
- Factory rated MTBF: 85,000 hours under standard industrial operating conditions
Material Composition
- Front panel frame: Machined aluminum alloy with matte anodized anti-scratch coating
- Touch cover glass: Tempered soda-lime glass with anti-reflection coating
- Rear housing: Extruded aluminum alloy integrated passive heat sink structure
- Internal circuit substrate: FR-4 industrial grade PCB with conformal silicone coating
- Membrane keys: Polyester film with silver conductive traces, abrasion-resistant silicone overlay
Structural Characteristics
- Standard cabinet front panel embedded mounting design, four rear M6 threaded mounting holes for fixed installation
- All wiring communication ports concentrated on rear bottom panel for clean cabinet wiring layout
- Removable rear service cover enabling easy access to internal storage and RAM expansion slots
- Sealed silicone rubber gasket between front frame and cabinet cutout to maintain IP65 front protection
- Rear panel equipped with status LED indicators for power, network, EtherCAT operational status
Working Principle
The panel PC operates TwinCAT 3 real-time automation runtime to execute PLC motion and logic control programs, receives machine feedback signals via EtherCAT/serial communication interfaces, displays real-time production data, alarm status and machine parameter curves on front TFT touchscreen. Operators send control commands via resistive touchscreen or physical membrane function keys; control instructions are transmitted to field I/O terminals and servo drives through onboard EtherCAT master port. All system configuration, production recipes and historical alarm data are stored on internal industrial SSD with backup function via external microSD card slot.
Advantage Highlights
- Fanless fully sealed front panel design eliminates dust accumulation and fan failure risks
- IP65 front protection tolerates direct workshop coolant splash and periodic high-pressure cabinet cleaning
- Native EtherCAT master interface removes external PLC controller hardware requirement for small machine tools
- Low-power Intel Celeron processor reduces cabinet heat generation and energy consumption
- Integrated physical membrane keys provide reliable operation under glove-wearing workshop conditions
- Wide-range 24 VDC power input tolerates industrial grid voltage fluctuation up to ±20%
- TwinCAT real-time OS delivers microsecond-level deterministic motion control performance
Applicable Industries
CNC machine tools, packaging automation machinery, textile production equipment, food processing machinery, injection molding machines, semiconductor assembly equipment, logistics conveying systems
Installation Requirements
- Embed into standard industrial control cabinet front panel matching 262 mm × 192 mm cutout dimension
- Tighten four rear M6 mounting bolts uniformly to compress front sealing silicone gasket completely
- Maintain ≥30 mm rear housing clearance inside cabinet for aluminum heat sink convection cooling
- Route all communication and power cables through cabinet cable glands to prevent dust ingress
- Cabinet internal ventilation fan recommended for continuous operation at ambient temperature above 45 ℃
- Separate power supply wiring and signal communication cables with internal cabinet isolation partitions
Usage Precautions
- Do not use high-pressure hot water jet directly on front touchscreen panel during equipment cleaning
- Avoid sharp metal tools scratching tempered touch cover glass surface
- Only utilize Beckhoff certified industrial microSD storage media for OS backup
- Prevent rear housing aluminum heat sink from contact with insulating foam blocking heat dissipation
- Do not operate panel PC with cabinet cutout gasket damaged or missing, IP65 protection will be invalid
- Avoid exposure to corrosive solvent vapor or conductive metal dust long-term operation
Reviews
There are no reviews yet.