CAT 164-8940 - Image 1
CAT 164-8940 - Image 2
Click to enlarge
CAT 164-8940
CAT 164-8940 - Image 2
Schneider 140XBP01000
Schneider 140XBP01000
Back to products
Parker 87-008145-03
Parker 87-008145-03

CAT 164-8940

Model Series: Cat C15 / C18 Diesel Engine Electronic Control System

Product Description:
The Cat 164-8940 is the primary electronic control module (ECM) for Caterpillar C15 and C18 Acert diesel engines. It governs all engine functions including fuel injection timing, turbocharger boost control, emissions management (SCR/DPF), and diagnostic reporting.

Category:
Description

Technical Specifications:

  • Part Number: 164-8940
  • Compatible Engines: Cat C15 Acert, C18 Acert
  • Processor: 32-bit ARM Cortex-based
  • Memory: 512 KB Flash, 256 KB RAM
  • Input Channels: 32 analog + 16 digital
  • Output Channels: 16 PWM + 8 digital
  • Operating Voltage: 8V to 32V DC
  • Operating Temperature: -40°C to +85°C
  • Communication: Cat ET (Serial), CAN 2.0B, J1939
  • Enclosure Rating: IP67 (when installed with proper connector seals)
  • Weight: 1.8 kg

Key Features:

  • Emissions Control: Manages SCR dosing, DPF regeneration, EGR valve position
  • Fault Diagnostics: Stores up to 500 active diagnostic trouble codes (DTCs)
  • Adaptive Control: Auto-calibrates fuel maps based on operating conditions
  • Flash Updateable: Firmware upgradable via Cat ET Service Tool

Applicable Industry: Heavy Equipment — Mining Trucks, Generator Sets, Marine Propulsion, Oil Field Equipment

Installation Requirements:

  • Mount in engine compartment with vibration isolator (max 5G)
  • Connect J1939 CAN bus with 120Ω termination at both ends
  • Seal all connector interfaces with dielectric grease
  • Verify 24V supply at ECM connector pin 1 (tolerance ±2V)

Usage Notes:

  • Re-flash ECM firmware every 24 months or when new emission regulations take effect
  • Replace ECM if internal fault code log exceeds 500 entries and cannot be cleared
  • Do not disconnect ECM while engine is running — immediate engine shutdown occurs
  • Operating above 85°C voids warranty — ensure cooling fan is functional at all times
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CAT 164-8940”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

BENDER IRDH575B1W-435

Technical Specifications:
    • Rated Voltage: Up to 690 V AC, 24–300 V DC
    • Measuring Range: 0 to 999 kΩ (depending on voltage level)
    • Response Time: Rapid detection time for insulation faults
    • Operating Temperature: -10°C to +60°C
    • Storage Temperature: -25°C to +70°C
    • Humidity Range: 0% to 95% relative humidity, non-condensing
    • Communication Interfaces: RS-485, Modbus RTU, Ethernet interface for network integration
    • Display: LCD display for status indication and parameter setting
Read more
Quick view

CONTROL 9180B-8

  • Power Supply: Supports AC 220V/50Hz or DC 24V, depending on design requirements.
  • Communication Interfaces: Equipped with RS-485, Ethernet, and Modbus protocols for seamless integration with other devices or systems.
  • Processor: High-performance CPU ensures rapid response and accurate control.
  • Protection Rating: IP65 or higher for dust and water resistance, suitable for harsh industrial conditions.
  • Operating Temperature: Wide temperature range to adapt to diverse industrial settings.
Read more
Quick view

KEBA FB201 — Comprehensive Data Sheet

Procurement Guidance

  1. Compatibility Notes
    • Verify suffix codes (e.g., FB201/xxx) for I/O capacity and environmental ratings .
    • Requires KEBA RobotStudio or ECL-3 software for configuration .
  2. Critical Accessories
    • Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
    • IP65 Housing for harsh environments (e.g., oil rigs, substations) .
  3. Avoid Mismatches
    • Servo drives → Refer to KEBA KeDrive.
    • HMIs → Use KEBA ETT Series.
Read more
Quick view

KUKA KSD1-08 Servo Drive Module – Complete Technical Profile

Technical Specifications:
  • The KSD1-08 is part of a series of drive systems tailored for dynamic and efficient operation of robotic arms and similar machinery.
  • It supports various communication protocols essential for integration within complex automation systems.
  • Capable of handling significant power loads while maintaining high efficiency and minimal heat generation, ensuring reliable performance over extended periods.
Read more
Quick view

Monico CDL-MCLE-FWM

Technical Specifications
  • Input Protocol: Caterpillar® CDL (Cat Data Link).
  • Output Protocols: Supports Modbus (RTU/TCP), CANopen, and other industrial protocols via configurable modules.
  • Data Polling Rate: High-speed, multi-threaded polling at 20–60 parameters per second for real-time monitoring.
  • Pre-configured Registers: Over 400 CDL-based registers for rapid deployment, with customizable mapping for specific applications.
Read more
Quick view

NOUENVOG AAP3798102-00131

Application Scenarios

  1. Compressor Control Systems
    • Cameron TA-Series: Manages inlet valve positioning, oil pressure, and vibration monitoring in TA2000/TA3000 compressors .
  2. Energy Infrastructure
    • Pump Stations: Regulates flow/pressure in pipeline transport .
    • Gas Turbine Backup: Synchronizes auxiliary systems during grid failures .
  3. Industrial Automation
    • Production Lines: Interfaces with Schneider/Bently Nevada PLCs for safety interlocks .
    • Remote Monitoring: Transmits operational data to SCADA via Modbus .
Read more
Quick view

TOSHIBA GBU648E-S

  • Slot Capacity: Supports up to 8 modules, allowing flexible configuration with TOSHIBA’s EX10 series components (e.g., power supplies, CPUs, I/O units).
  • Power Supply Compatibility: Works with modules like PS261 (power supply) and PU11A (CPU), ensuring stable energy distribution and control logic execution.
  • Communication Modules: Integrates with Profibus DP modules (e.g., GPF611-S) for seamless connectivity with field devices, enabling real-time data exchange in industrial networks.
  • Analog/Digital Modules: Compatible with GAD668-S (analog input) and GDA664-S (analog output) modules, supporting high-precision signal processing for sensors and actuators.
  • Physical Design: Compact, rack-mounted structure optimized for space efficiency in control panels.
Read more
Quick view

Yaskawa CACR-SR07BE12M

  • Input Voltage: Three - phase AC 200V - 230V
  • Output Current: 7A
  • Output Power: 1.5kW or 0.75kW
  • Control Method: Vector control
  • Communication Interface: RS - 485
  • Protection Level: IP20
  • Output Frequency Range: 0.1 - 400Hz
  • Overload Capacity: 150% of the rated current for 60 seconds
  • Dimensions: 150mm * 240mm * 350mm
  • Weight: Approximately 1.14kg
Read more
Quick view