GE IC693ALG221J 4-Channel Analog Current Input Module - Image 1
GE IC693ALG221J 4-Channel Analog Current Input Module - Image 2
Click to enlarge
GE IC693ALG221J 4-Channel Analog Current Input Module
GE IC693ALG221J 4-Channel Analog Current Input Module - Image 2
GE IC693ACC302 Auxiliary Battery Module
GE IC693ACC302 Auxiliary Battery Module
Back to products
GE IC693BEM331D Genius Bus Controller Module
GE IC693BEM331D Genius Bus Controller Module

GE IC693ALG221J 4-Channel Analog Current Input Module

Product Introduction
The IC693ALG221J is an analog current input module designed for the GE Fanuc Series 90-30 PLC system . It provides four independent channels specifically optimized for 4–20 mA and 0–20 mA current loops, converting field signals from transmitters and sensors into digital data for the CPU . Typical applications include monitoring continuous industrial variables such as pressure, temperature, and flow .

Category:
Description

Technical Specifications
Module Type: Analog Input Module
Compatible System: GE Fanuc Series 90-30
Number of Channels: 4
Input Type: Analog current
Input Ranges: 4–20 mA and 0–20 mA
Resolution: 12-bit
Accuracy: ±0.1% of full scale at 25°C
Input Impedance: 250 Ω
Update Rate: Approximately 1.5 ms per channel
Isolation: 1500 V RMS field-side to logic-side isolation
Power Consumption: 100 mA from +5V bus; 25 mA from isolated +24V bus
Weight: 0.35 kg
LED Indicators: RUN, FAULT, and channel status indicators

Key Features
High-Accuracy Conversion: 12-bit resolution with ±0.1% full-scale accuracy ensures precise signal acquisition for critical process control applications .
Strong Electrical Isolation: 1500 V RMS isolation between field connections and the PLC backplane protects against ground loops, surges, and industrial electrical noise .
Configurable Input Ranges: Supports both 4–20 mA and 0–20 mA current inputs, selectable via jumpers to accommodate different field transmitter specifications .
Loop Fault Detection: The 4–20 mA standard enables automatic detection of open-circuit conditions when current drops below 4 mA, providing immediate fault signaling .
Fast Data Acquisition: Provides an update rate of approximately 1.5 ms per channel, supporting responsive PID control and rapid fault detection requirements .
LED Status Indication: Front-panel LEDs display RUN, FAULT, and individual channel status for simplified troubleshooting and commissioning .
Wide Compatibility: Supports both loop-powered and externally powered transmitters when wired correctly for flexible installation options .

Application Scenarios
Process Control: Monitoring temperature, pressure, and flow in chemical, pharmaceutical, and food processing plants .
Oil and Gas: Measurement of process variables in extraction, refining, and pipeline operations .
Power Generation: Monitoring equipment status and operational parameters in power plants .
Water Treatment: Flow and pressure monitoring in municipal and industrial water management facilities .
Manufacturing Automation: Integration with sensor networks for automated production lines in automotive, packaging, and textile industries .

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GE IC693ALG221J 4-Channel Analog Current Input Module”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

GE 239-RTD-AN Motor Protection Relay with RTD Inputs

unctional Features

  1. Advanced Protection Algorithms
    • 15 Thermal Curves: Configurable overload curves to match motor characteristics .
    • RTD Monitoring: Direct integration with PT100/PT1000 sensors for real-time winding temperature tracking (±0.5% accuracy) .
  2. Operational Flexibility
    • Programmable Outputs: Customizable relay actions for alarms, trips, or process signals (e.g., motor load percentage) .
    • Test Mode: Simulates faults without activating outputs for system validation .
Read more
Quick view

GE 469-P5-HI-A20-E-H Motor Management Relay

Technical Specifications:
  • Voltage Rating: Designed to operate within standard industrial control voltages, typically compatible with 125 VDC or 250 VDC control systems.
  • Current Input: Accepts standard current transformer (CT) inputs such as 1 A or 5 A, enabling integration with various generator monitoring setups.
  • Communication Interfaces: Equipped with multiple communication options including Modbus RTU over RS-485, and optionally Ethernet for integration into SCADA and distributed control systems.
Read more
Quick view

GE IC698CPE010 – Control Processor Module

The GE IC698CPE010 (also referred to as the PACSystems RX7i VME CPU) is a high-performance industrial controller designed for real-time automation and process control in mission-critical environments. As part of GE’s PACSystems RX7i platform, it combines robust hardware with flexible programming capabilities to meet the demands of complex industrial applications.
Read more
Quick view

GE IC698CPE040-FJ Central Processing Unit Designed for RX7i PACSystems

Procurement Guidance

  1. Compatibility Notes
    • Valid for RX7i/RX3i PACSystems; firmware suffixes (e.g., -FJ) denote specific variants .
    • Backward-compatible with legacy GE PLCs (e.g., Series 90-70) .
  2. Critical Accessories
    • IC698ACC701 Lithium Battery: Mandatory for RAM backup .
    • VME I/O Modules: e.g., DS200 series for signal distribution .
  3. Avoid Mismatched Claims
    • "512 MB RAM" → Refers to GE IC698CPE030 model .
    • "3AC 400V Input" → Applies to power modules, not CPU logic .
  4. Warranty & Authenticity
    • 12-month warranty for factory-sealed units; verify holographic seals .
    • Cross-check part number 3BHE030579R0003 for industrial-grade variants .
Read more
Quick view

GE IS215UCVEM08 Mark VI Controller Processor Module

Technical Specifications:

  • Module Type: The IS215UCVEM08 is a Control Processing Module designed to execute control logic and communicate with field devices and other system components.
  • Processor: Equipped with a high-performance processor capable of handling complex control algorithms and real-time data processing.
  • Memory: Comes with onboard memory sufficient for storing configuration files, application code, and operational data. It supports both volatile and non-volatile storage options.
  • Communication Interfaces: Supports various communication protocols including Ethernet, ControlNet, and others, facilitating integration with different parts of the control system and external devices.
  • I/O Capabilities: Designed to interface with input/output modules for collecting data from sensors and sending commands to actuators. It can manage digital and analog signals.
Read more
Quick view

GE VMIVME-2540 Intelligent Counter/Controller

Technical Specifications:

  • Module Type: 16-channel analog-to-digital input module for VMEbus systems.
  • Input Resolution: 16-bit resolution ensures high accuracy and fine signal discrimination across the measurement range.
  • Input Voltage Ranges: Supports multiple selectable input ranges including ±10 V, ±5 V, 0–10 V, and 0–5 V, accommodating a wide variety of sensor and transducer outputs.
  • Sampling Rate: Capable of high-speed data acquisition with a per-channel sampling rate up to 100 kHz, enabling real-time monitoring of fast-changing signals.
  • Analog Inputs: Features 16 single-ended or 8 differential input channels, providing flexibility in signal connection and noise rejection.
Read more
Quick view

GE VMIVME-5576 High-Speed Fiber-Optic Reflective Memory Interface

Technical Specifications:

  • Processor: Equipped with a powerful processor that supports high-speed operation suitable for compute-intensive tasks. Depending on the specific configuration, it can feature processors like PowerPC or Intel architectures.
  • Memory: Offers significant RAM capacity, essential for running complex applications and multitasking efficiently. It also includes options for non-volatile memory for data retention without power.
  • Storage: Supports various storage options such as CompactFlash or SSD for storing operating systems, applications, and data.
  • I/O Interfaces: Comes with multiple I/O interfaces including USB ports, serial ports, Ethernet, and digital I/O, allowing connectivity to a wide range of peripherals and networks.
Read more
Quick view

GE VMIVME-7740-840 350-07740-840-M – High-Performance VME Single-Board Computer

Technical Specifications:

  • Processor: Equipped with a powerful processor suitable for industrial computing needs. The exact model can vary but often includes options such as PowerPC or other high-performance processors.
  • Memory: Supports substantial RAM capacity to handle complex tasks efficiently. Also includes onboard flash memory for storage.
  • Expansion Slots: Features multiple VMEbus slots allowing for flexible system expansion and integration with other VMEbus compatible modules.
  • Communication Interfaces: Includes Ethernet ports, serial interfaces, USB ports, and potentially other communication interfaces for versatile connectivity options.
  • Environmental Ratings: Designed to operate under specific temperature ranges and conditions suitable for harsh industrial environments.
  • Operating System Support: Compatible with various operating systems including VxWorks, Linux, and others depending on configuration and application requirements.
Read more
Quick view