GE IC698PSA350D - Image 1
GE IC698PSA350D - Image 2
Click to enlarge
GE IC698PSA350D
GE IC698PSA350D - Image 2
GE IC698PSA100
GE IC698PSA100
Back to products
GE IC752SPL013-BA
GE IC752SPL013-BA

GE IC698PSA350D

  • Product Overview: High-power primary power supply for GE PACSystems RX7i main racks, installed in slot 0 of the VME64 backplane. It converts 85–264 VAC (47–63 Hz) or 100–150 VDC input to +5 VDC (60A), +12 VDC (12A), -12 VDC (4A) outputs with 350W total power. The module sends logic-level sequencing signals to backplane modules, maintains output during 1 AC line cycle interruption, and includes overcurrent/overvoltage/short-circuit protection with front-panel LED indicators. Active power factor correction (PFC) improves efficiency and reduces harmonic distortion.
  • Technical Specifications – Input Voltage: 85–264 VAC (47–63 Hz) or 100–150 VDC; nominal 120/240 VAC or 125 VDC
Category:
Description
  • Technical Specifications – Output Voltages & Currents: +5 VDC (60A max), +12 VDC (12A max), -12 VDC (4A max)
  • Technical Specifications – Total Output Power: 350W continuous at 0°C–60°C (no forced air cooling)
  • Technical Specifications – Input Power: 440W typical, 500W maximum input power
  • Technical Specifications – Ride-Through & Hold-Up: 15ms minimum ride-through; 5ms minimum hold-up
  • Technical Specifications – Protection Limits: +5 VDC overvoltage 5.7–6.7V; +5 VDC overcurrent 63A; +12 VDC overcurrent 13A; -12 VDC overcurrent 5A
  • Technical Specifications – Power Factor Correction: Active PFC for AC input improves efficiency and reduces harmonics
  • Technical Specifications – Physical: Single-slot width; front-panel LEDs (FIELD OK, OUTPUT OK, OVER TEMP, ON/OFF Switch); slide-in rack mount
  • Technical Specifications – Environmental: Operating 0°C–60°C; storage -40°C–85°C; 5%–95% non-condensing humidity
  • Technical Specifications – Isolation: 3750 VDC input-to-backplane isolation; 500 VDC output-to-chassis isolation
  • Functional Features – Slot 0 Dedicated: Installs in slot 0 of RX7i main rack; powers all backplane modules and provides sequencing signals
  • Functional Features – High-Current Outputs: 60A +5 VDC, 12A +12 VDC, 4A -12 VDC support high-density I/O, CPUs, and communication modules
  • Functional Features – Wide Input Compatibility: 85–264 VAC/100–150 VDC input works with global power grids and DC systems
  • Functional Features – Power Interruption Ride-Through: Maintains output during 1 AC line cycle (16.7ms at 60Hz) for short grid disturbances
  • Functional Features – Comprehensive Protection: Overcurrent, overtemperature, overvoltage shutdown with active limits prevent damage to modules
  • Functional Features – LED Status Monitoring: FIELD OK (input within range), OUTPUT OK (DC outputs normal), OVER TEMP (overtemperature fault)
  • Functional Features – Logic Sequencing: Sends backplane logic-level signals to ensure modules initialize/power up in correct order
  • Functional Features – No Forced Cooling: 350W output at 0°C–60°C without fans reduces maintenance and dust ingress
  • Application Scenarios – RX7i High-Density Main Racks: Powers CPU, I/O, communication modules in slot 0 of RX7i main racks with 60A +5 VDC for high I/O counts
  • Application Scenarios – Process Automation: Chemical, oil/gas, water treatment with wide input voltage tolerance and 350W power for large I/O systems
  • Application Scenarios – Power Generation: Turbine/generator control rooms with 125 VDC backup and ride-through for grid fluctuations
  • Application Scenarios – Discrete Manufacturing: Automotive/electronics assembly lines with high I/O counts requiring 60A +5 VDC
  • Application Scenarios – Legacy System Migration: Supports Series 90-70 I/O modules in RX7i racks, maintaining power compatibility
  • Application Scenarios – Remote/Unattended Sites: No forced cooling reduces downtime in harsh, dust-prone environments
  • Application Scenarios – High-Availability Systems: Combined with IC698PSA040 redundant power for zero-downtime critical infrastructure
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GE IC698PSA350D”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

GE 516TX 336A4940DNP516TX — Industrial Ethernet Switch (N-Tron 516TX Series)

The GE 516TX 336A4940DNP516TX (also referred to as the N-TRON 516TX-A Industrial Ethernet Switch) is a high-reliability networking device designed for mission-critical industrial environments. Part of GE's N-TRON series, this switch delivers robust connectivity and advanced management features for industrial automation systems.
Read more
Quick view

GE ACC-5595-208 Reflective Memory Hub – Comprehensive Datasheet

The GE ACC-5595-208 (also referred to as the VMIACC-5595 Reflective Memory Hub) is a high-performance networking device designed for mission-critical industrial environments requiring deterministic data synchronization. Part of GE’s reflective memory product line, this hub delivers robust connectivity and advanced management features for real-time control systems.
Read more
Quick view

GE DS200TCQCG1AJD Mark V Series RST Overflow / Analog I/O Expansion Board

Functional Features

  1. Advanced Control & Protection
    • Real-time processing of turbine parameters (speed, temperature, pressure) with ±0.25% accuracy .
    • Fault Mitigation: Auto-triggered shutdowns for overvoltage, overload, or mechanical stress .
  2. Diagnostics & Health Monitoring
    • Embedded diagnostics for predictive maintenance (e.g., bearing vibration analysis) .
    • Event logging with timestamped fault histories for root-cause analysis .
Read more
Quick view

GE IC698CRE040-HN-2

Technical Specifications:
  • The IC698CRE040-HN-2 features a powerful processor enabling fast execution of control logic, suitable for demanding real-time applications.
  • It supports a large memory capacity for user programs and data, allowing for sophisticated control strategies and data logging.
  • Provides integrated Ethernet communication ports for connectivity to programming devices, HMIs, SCADA systems, and other controllers, supporting standard protocols such as Modbus TCP/IP and SNMP.
  • Compatible with the entire range of RX3i I/O modules, enabling flexible system expansion and customization to meet specific application needs.
  • Operates within a wide temperature range and is designed to withstand industrial environmental conditions, including electrical noise and vibration.
Read more
Quick view

GE Multilin 369-H1-R-M-F-E-H-E – Motor Management Relay

The GE 369-HI-R-M-F-E-H-E (also referred to as the Multilin 369 Motor Management Relay) is a high-performance industrial device designed for advanced motor protection, monitoring, and control in mission-critical applications. As part of GE’s Multilin product line, it combines robust hardware with programmable logic to ensure reliability in harsh environments.
Read more
Quick view

GE RS-FS-9001 362A1052P004 – Complete Technical Profile

Technical Specifications:
  • Designed as part of the Mark VI or Mark Vie control system family, which are widely recognized for their application in gas and steam turbine controls.
  • Supports various input/output configurations tailored to handle signals from sensors, actuators, and other field devices integral to turbine operations.
  • Capable of operating within specific voltage ranges and environmental conditions suitable for industrial settings.
  • Equipped with robust communication capabilities that facilitate integration with broader plant networks and SCADA systems.
Read more
Quick view

GE VMIVME-2540 Intelligent Counter/Controller

Technical Specifications:

  • Module Type: 16-channel analog-to-digital input module for VMEbus systems.
  • Input Resolution: 16-bit resolution ensures high accuracy and fine signal discrimination across the measurement range.
  • Input Voltage Ranges: Supports multiple selectable input ranges including ±10 V, ±5 V, 0–10 V, and 0–5 V, accommodating a wide variety of sensor and transducer outputs.
  • Sampling Rate: Capable of high-speed data acquisition with a per-channel sampling rate up to 100 kHz, enabling real-time monitoring of fast-changing signals.
  • Analog Inputs: Features 16 single-ended or 8 differential input channels, providing flexibility in signal connection and noise rejection.
Read more
Quick view

GE VMIVME-7740-840 350-07740-840-M – High-Performance VME Single-Board Computer

Technical Specifications:

  • Processor: Equipped with a powerful processor suitable for industrial computing needs. The exact model can vary but often includes options such as PowerPC or other high-performance processors.
  • Memory: Supports substantial RAM capacity to handle complex tasks efficiently. Also includes onboard flash memory for storage.
  • Expansion Slots: Features multiple VMEbus slots allowing for flexible system expansion and integration with other VMEbus compatible modules.
  • Communication Interfaces: Includes Ethernet ports, serial interfaces, USB ports, and potentially other communication interfaces for versatile connectivity options.
  • Environmental Ratings: Designed to operate under specific temperature ranges and conditions suitable for harsh industrial environments.
  • Operating System Support: Compatible with various operating systems including VxWorks, Linux, and others depending on configuration and application requirements.
Read more
Quick view