GE IC670MDL740K Digital Output Module - Image 1
GE IC670MDL740K Digital Output Module - Image 2
Click to enlarge
GE IC670MDL740K Digital Output Module
GE IC670MDL740K Digital Output Module - Image 2
GE IC670MDL640 Digital Input Module
GE IC670MDL640 Digital Input Module
Back to products
GE IC687RCM711 Redundant Communication Module
GE IC687RCM711 Redundant Communication Module

GE IC670MDL740K Digital Output Module

Technical Specifications

  • Number of Output Channels: 16 digital output channels
  • Output Signal Types: Supports 24 VDC output signals
  • Output Current: 0.5 A per channel
  • Maximum Total Output Current: 8 A (for all channels combined)
  • Output Voltage Range: 10 VDC to 30 VDC
  • Power Consumption: 111 mA from the Bus Interface Unit (BIU) power supply
Category:
Description
  • Operating Temperature: 0°C to 60°C
  • Storage Temperature: -40°C to 85°C
  • Humidity: 5% to 95% non-condensing
  • Isolation: Channel-to-channel and channel-to-bus isolation rated at 1500 VAC
  • Surge Current: 2 A maximum for 100 ms
  • Minimum Load Current: 1 mA per point
  • Output Leakage Current: 5.30 mA at 0 VDC
  • Response Time: Typical response time for on/off signal transitions

Functional Features

  • Status LED Indicators: Each output channel is equipped with an LED indicator to show the on/off status of the output.
  • Built-in Diagnostics: The module includes diagnostic capabilities for detecting open-circuit conditions and over-range faults, simplifying troubleshooting.
  • Robust Isolation: Features channel-to-channel and channel-to-bus isolation, enhancing system stability and protecting against electrical noise and ground loops.
  • Modular Design: Designed for easy installation and integration into existing VersaMax systems, supporting DIN rail or panel mounting.
  • Hot-Swapping Capability: Supports hot-swapping operations, allowing modules to be inserted or removed without powering down the system (when used with appropriate BIU firmware).
  • Protection Mechanisms: Includes a 5 A fuse for protecting the output from overcurrent conditions and a status indicator for fuse熔断 (fuse blow) detection.

Application Scenarios

  • Industrial Automation Control Systems: Used in manufacturing plants to control various mechanical equipment, such as motors, pumps, and conveyors, enhancing production efficiency and reliability.
  • Power System Monitoring: Powers and controls equipment in power generation and distribution systems, including solar farms and wind turbines, optimizing energy utilization.
  • Water and Wastewater Treatment: Drives actuators in water treatment plants, ensuring accurate control of chemical dosing and water distribution.
  • Building Automation: Manages HVAC, lighting, and security systems in smart buildings, enhancing occupant comfort and energy efficiency.
  • Process Control: Monitors and controls process variables like pressure, temperature, and flow rate in chemical, petrochemical, and pharmaceutical plants, ensuring precise process control.
  • Robotics Control Systems: Provides digital output signals for robot controllers, enabling precise control of robotic movements and operations.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GE IC670MDL740K Digital Output Module”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

GE 469-P5-HI-A20-E-H Motor Management Relay

Technical Specifications:
  • Voltage Rating: Designed to operate within standard industrial control voltages, typically compatible with 125 VDC or 250 VDC control systems.
  • Current Input: Accepts standard current transformer (CT) inputs such as 1 A or 5 A, enabling integration with various generator monitoring setups.
  • Communication Interfaces: Equipped with multiple communication options including Modbus RTU over RS-485, and optionally Ethernet for integration into SCADA and distributed control systems.
Read more
Quick view

GE DS200FCGDH1B

Procurement Guidance

  • Validated Models: DS200FCGDH1B (base) ; 3BHB005243R0106 (redundant variant for Mark VI).
  • Critical Accessories:
    • DS200DSPC (VME processor) for signal generation .
    • GE Mark V/VIturbine control racks for integration .
  • Exclude Mismatched Claims:
    • Circuit breaker specs → Refer to GE DS200 series breakers.
    • AC input modules → Use GE UFC760BE42.
  • Warranty: 12 months for factory-sealed units .
Read more
Quick view

GE DS200TCQCG1AJD Mark V Series RST Overflow / Analog I/O Expansion Board

Functional Features

  1. Advanced Control & Protection
    • Real-time processing of turbine parameters (speed, temperature, pressure) with ±0.25% accuracy .
    • Fault Mitigation: Auto-triggered shutdowns for overvoltage, overload, or mechanical stress .
  2. Diagnostics & Health Monitoring
    • Embedded diagnostics for predictive maintenance (e.g., bearing vibration analysis) .
    • Event logging with timestamped fault histories for root-cause analysis .
Read more
Quick view

GE IS215UCVEH2AE

The GE IS215UCVEH2AE is a VMEbus-based controller card designed for mission-critical industrial control systems, particularly within GE's Mark VI Speedtronic Turbine Control System. It serves as the central processing unit (CPU) for managing real-time operations in gas and steam turbines, ensuring precise control and monitoring of rotational speed, load, and safety parameters.
Read more
Quick view

GE IS215UCVEM08 Mark VI Controller Processor Module

Technical Specifications:

  • Module Type: The IS215UCVEM08 is a Control Processing Module designed to execute control logic and communicate with field devices and other system components.
  • Processor: Equipped with a high-performance processor capable of handling complex control algorithms and real-time data processing.
  • Memory: Comes with onboard memory sufficient for storing configuration files, application code, and operational data. It supports both volatile and non-volatile storage options.
  • Communication Interfaces: Supports various communication protocols including Ethernet, ControlNet, and others, facilitating integration with different parts of the control system and external devices.
  • I/O Capabilities: Designed to interface with input/output modules for collecting data from sensors and sending commands to actuators. It can manage digital and analog signals.
Read more
Quick view

GE IS215VPROH1BD – Turbine Protection Module

Technical Specifications

  • Hardware Architecture
    • Input Voltage: 125V DC (operational range: 70–145V DC) .
    • Output Voltage: 5V DC (logic supply) and 28V DC (actuation supply) .
    • Sampling Rate: Up to 100 Hz for real-time monitoring of turbine speed, vibration, and other parameters .
Read more
Quick view

GE Multilin 369-H1-R-M-F-E-H-E – Motor Management Relay

The GE 369-HI-R-M-F-E-H-E (also referred to as the Multilin 369 Motor Management Relay) is a high-performance industrial device designed for advanced motor protection, monitoring, and control in mission-critical applications. As part of GE’s Multilin product line, it combines robust hardware with programmable logic to ensure reliability in harsh environments.
Read more
Quick view

GE VMIVME-5576 High-Speed Fiber-Optic Reflective Memory Interface

Technical Specifications:

  • Processor: Equipped with a powerful processor that supports high-speed operation suitable for compute-intensive tasks. Depending on the specific configuration, it can feature processors like PowerPC or Intel architectures.
  • Memory: Offers significant RAM capacity, essential for running complex applications and multitasking efficiently. It also includes options for non-volatile memory for data retention without power.
  • Storage: Supports various storage options such as CompactFlash or SSD for storing operating systems, applications, and data.
  • I/O Interfaces: Comes with multiple I/O interfaces including USB ports, serial ports, Ethernet, and digital I/O, allowing connectivity to a wide range of peripherals and networks.
Read more
Quick view