GE D1063S Load Cell Signal Repeater and Isolator - Image 1
GE D1063S Load Cell Signal Repeater and Isolator - Image 2
Click to enlarge
GE D1063S Load Cell Signal Repeater and Isolator
GE D1063S Load Cell Signal Repeater and Isolator - Image 2
GE D20 EME 10BASE-T Digital Control Module
GE D20 EME 10BASE-T Digital Control Module
Back to products
GE DS200CDBAG1ABA Mark V Turbine Control System Contactor Driver Board
GE DS200CDBAG1ABA Mark V Turbine Control System Contactor Driver Board

GE D1063S Load Cell Signal Repeater and Isolator

Technical Specifications

  • Input: Accepts signals from load cells in hazardous areas (Zone 0, Zone 20, Division 1).
  • Output: Repeats the mV signal output to drive a load in the safe area, depending on the host system reference voltage.
  • Load Cell Connection: Supports up to four 350 Ω load cells, six 450 Ω load cells, or twelve 1000 Ω load cells connected in parallel.
  • Voltage Reference: Configurable via DIP switch to select internal or external (host system) supply.
  • Isolation: Three-port isolation (Input/Output/Supply) for enhanced safety and signal integrity.
Category:
Description
  • Field Wiring Fault Detection: Features a red LED indicator for any wire break in the hazardous area side.
  • Accuracy: High-precision signal repetition with minimal distortion.
  • Certifications: Complies with ATEX, IECEx, FM & FM-C, Russian maritime approvals (DNV and KR), and EMC standards (EN61000-6-2, EN61000-6-4).
  • Operating Temperature: -20°C to +60°C (storage temperature: -40°C to +85°C).
  • Mounting: Standard DIN rail mounting for easy installation.
  • Protection: IP68 rated for dust and water resistance (when properly installed).

Functional Characteristics

  • Transparent Repeater: Acts as a transparent interface, ensuring the weighing indicator sees the load cell as if it were directly connected.
  • Galvanic Isolation: Provides electrical isolation between the hazardous and safe areas, preventing interference and ensuring safety.
  • Field Programmability: Configurable via DIP switches for easy setup and customization.
  • High Reliability: Built with SMD components for long-term stability and durability.
  • Simplified Installation: Plug-in terminal blocks and DIN rail mounting reduce installation time and effort.

Application Scenarios

  • Industrial Automation: Used in weighing systems for precise measurement and control of materials in manufacturing processes.
  • Chemical and Petrochemical Plants: Ensures safe and accurate weighing in hazardous environments where explosive gases or dust may be present.
  • Oil and Gas Industry: Provides reliable load cell signal transmission in offshore and onshore applications.
  • Pharmaceuticals: Used in cleanroom environments for precise ingredient weighing and batching.
  • Food and Beverage: Ensures hygienic and accurate weighing in production lines.
  • Maritime Applications: Suitable for use in ships and offshore platforms due to its maritime certifications.
  • Energy Sector: Utilized in power plants and renewable energy installations for monitoring and control purposes.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GE D1063S Load Cell Signal Repeater and Isolator”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

GE DS200FCGDH1B

Procurement Guidance

  • Validated Models: DS200FCGDH1B (base) ; 3BHB005243R0106 (redundant variant for Mark VI).
  • Critical Accessories:
    • DS200DSPC (VME processor) for signal generation .
    • GE Mark V/VIturbine control racks for integration .
  • Exclude Mismatched Claims:
    • Circuit breaker specs → Refer to GE DS200 series breakers.
    • AC input modules → Use GE UFC760BE42.
  • Warranty: 12 months for factory-sealed units .
Read more
Quick view

GE IC695CPE310 PACSystems RX3i Controller — Full Technical Profile

Technical Specifications:
  • Processor: Equipped with a powerful processor capable of handling sophisticated control algorithms and large amounts of data at high speeds.
  • Memory: Features ample user memory for program storage and execution, alongside additional memory for data logging and historical information.
  • Communication Interfaces: Supports multiple communication protocols including Ethernet/IP, Modbus TCP, and serial communications, allowing seamless integration into diverse network environments.
  • I/O Capabilities: Designed to interface with various input/output modules, supporting both discrete and analog signals for comprehensive control over field devices.
  • Redundancy Options: Offers redundancy features to enhance system reliability, ensuring continuous operation in critical applications.
  • Environmental Tolerance: Built to operate reliably under harsh industrial conditions, withstanding wide temperature ranges, vibration, and electrical noise.
Read more
Quick view

GE IC698CPE040-FJ Central Processing Unit Designed for RX7i PACSystems

Procurement Guidance

  1. Compatibility Notes
    • Valid for RX7i/RX3i PACSystems; firmware suffixes (e.g., -FJ) denote specific variants .
    • Backward-compatible with legacy GE PLCs (e.g., Series 90-70) .
  2. Critical Accessories
    • IC698ACC701 Lithium Battery: Mandatory for RAM backup .
    • VME I/O Modules: e.g., DS200 series for signal distribution .
  3. Avoid Mismatched Claims
    • "512 MB RAM" → Refers to GE IC698CPE030 model .
    • "3AC 400V Input" → Applies to power modules, not CPU logic .
  4. Warranty & Authenticity
    • 12-month warranty for factory-sealed units; verify holographic seals .
    • Cross-check part number 3BHE030579R0003 for industrial-grade variants .
Read more
Quick view

GE IS200VAICH1D – Analog Input Module for Mark VI Systems

Technical Specifications:

  • Function: Analog Input Card
  • Compatibility: Designed to work with Mark VI Speedtronic turbine control systems
  • Signal Conversion: Converts various analog signals (e.g., 4-20mA, voltage) to digital format for processing
  • Channels: Typically supports multiple input channels depending on configuration
  • Power Supply: Operates within specified voltage ranges suitable for industrial environments
  • Environmental Conditions: Rated for operation under certain temperature and humidity conditions
Read more
Quick view

GE IS215VPROH1BD – Turbine Protection Module

Technical Specifications

  • Hardware Architecture
    • Input Voltage: 125V DC (operational range: 70–145V DC) .
    • Output Voltage: 5V DC (logic supply) and 28V DC (actuation supply) .
    • Sampling Rate: Up to 100 Hz for real-time monitoring of turbine speed, vibration, and other parameters .
Read more
Quick view

GE MRP643486 IS200VSVOH1BDC — VME Servo Control Card

Technical Specifications:

  • Function: Servo Output Board
  • Compatibility: Designed for use with the Mark VI and Mark Vie Speedtronic turbine control systems.
  • Channels: Typically includes multiple channels for controlling different servo mechanisms.
  • Signal Processing: Converts digital control signals from the system into analog outputs to drive servos.
  • Power Supply: Operates within specified voltage ranges suitable for industrial environments.
  • Environmental Conditions: Rated for operation under specific temperature and humidity conditions, ensuring reliability in demanding settings.
Read more
Quick view

GE RS-FS-9001 362A1052P004 – Complete Technical Profile

Technical Specifications:
  • Designed as part of the Mark VI or Mark Vie control system family, which are widely recognized for their application in gas and steam turbine controls.
  • Supports various input/output configurations tailored to handle signals from sensors, actuators, and other field devices integral to turbine operations.
  • Capable of operating within specific voltage ranges and environmental conditions suitable for industrial settings.
  • Equipped with robust communication capabilities that facilitate integration with broader plant networks and SCADA systems.
Read more
Quick view

GE VMIVME-5576 High-Speed Fiber-Optic Reflective Memory Interface

Technical Specifications:

  • Processor: Equipped with a powerful processor that supports high-speed operation suitable for compute-intensive tasks. Depending on the specific configuration, it can feature processors like PowerPC or Intel architectures.
  • Memory: Offers significant RAM capacity, essential for running complex applications and multitasking efficiently. It also includes options for non-volatile memory for data retention without power.
  • Storage: Supports various storage options such as CompactFlash or SSD for storing operating systems, applications, and data.
  • I/O Interfaces: Comes with multiple I/O interfaces including USB ports, serial ports, Ethernet, and digital I/O, allowing connectivity to a wide range of peripherals and networks.
Read more
Quick view