Motorola APM-420A Power Module - Image 1
Motorola APM-420A Power Module - Image 2
Click to enlarge
Motorola APM-420A Power Module
Motorola APM-420A Power Module - Image 2
Motorola 188987-008R 188987-008R001
Motorola 188987-008R 188987-008R001
Back to products
Motorola IPMC712
Motorola IPMC712

Motorola APM-420A Power Module

Technical Specifications:

  • Input Voltage: Typically supports a wide range of AC input voltages (specific range not detailed in sources, but industrial modules often support 90-264VAC).
  • Output Voltage and Current: Provides stable DC output with precise voltage regulation and current limiting to protect connected devices. Exact output specifications depend on the configuration but are designed to meet the requirements of industrial equipment.
  • Efficiency: High conversion efficiency, reducing energy loss and heat generation.
  • Protection Functions: Includes over-voltage protection, over-current protection, and over-temperature protection to safeguard the module and connected devices.
  • Thermal Management: Equipped with a thermal management system to maintain stable operation in high-temperature environments.
  • Remote Monitoring and Management: Some models support remote monitoring and management via network interfaces, allowing users to monitor the status of the power system and make adjustments as needed.
  • Modular Design: The module is designed for easy installation, maintenance, and replacement, reducing downtime and operational costs.
Category:
Description

Key Features:

  • High Reliability: Motorola’s products are known for their high reliability and stability, ensuring long-term operation in industrial environments.
  • Efficient Power Conversion: The module efficiently converts input power into the required DC output, minimizing energy waste.
  • Comprehensive Protection: Multiple protection features ensure the safety of the module and connected devices under various fault conditions.
  • Flexible Configuration: The modular design allows for flexible configuration to meet different application requirements.
  • Easy Maintenance: The module is designed for easy installation and replacement, reducing maintenance time and costs.

Applications:

  • Industrial Automation: Used in DCS (Distributed Control Systems) and PLC (Programmable Logic Controller) systems to provide stable power supply for control units, sensors, and actuators.
  • Wireless Communication: Powers base stations, repeaters, and other wireless communication equipment, ensuring reliable signal transmission.
  • Network Equipment: Provides power for routers, switches, and other network devices in industrial networks.
  • Embedded Systems: Serves as a core power component in embedded systems requiring high reliability and stability.

Industry Use Cases:

  • Power Generation: Manages and monitors critical equipment in power plants, including generators and transformers.
  • Manufacturing: Controls and monitors production lines, ensuring consistent operation of machinery and robots.
  • Transportation: Powers signaling and control systems in railways and subways, enhancing safety and efficiency.
  • Oil and Gas: Provides reliable power for monitoring and control systems in remote oil and gas fields.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Motorola APM-420A Power Module”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

MOTOROLA MVME-2434 VMEbus Processor Module

Technical Specifications
  • Processor:
    • Motorola 68020 (some versions may feature different processors, such as the PowerPC e500 in advanced models).
    • Advanced models may include the Freescale MPC8540 system-on-chip with a PowerPC e500 core, running at speeds up to 833 MHz.
  • Memory:
    • 2MB RAM (expandable in some models).
    • 1MB Flash memory for firmware storage.
    • Advanced models support up to 512MB DDR333 ECC memory for enhanced data processing accuracy.
Read more
Quick view

Motorola MVME-61006E-0163 VMEbus Single Board Computer

Technical Specifications
  • Processor: Equipped with an NXP MPC7457 PowerPC processor, running at up to 1.267 GHz, featuring a 128-bit AltiVec coprocessor for enhanced parallel processing capabilities.
  • Memory: Supports up to 1 GB of ECC-protected DDR DRAM for reliable data storage and processing, along with up to 128 MB of flash memory for firmware and application storage.
  • VMEbus Interface: Utilizes the Tundra Tsi148 VMEBridge ASIC, providing 2eSST protocol support for a VMEbus transfer rate of up to 320 MB/s, ensuring high-speed data communication within the VMEbus system.
  • I/O Interfaces:
    • Ethernet: Dual Gigabit Ethernet ports for high-speed network connectivity.
    • Serial Ports: One asynchronous serial port for communication with peripheral devices.
    • PMC Sites: Two 64-bit PMC (PCI Mezzanine Card) sites, supporting PCI bus speeds from 33 MHz to 66 MHz, allowing for expansion with industry-standard modules.
    • Other Interfaces: Includes a reset and abort switch, and LED indicators for board status monitoring.
Read more
Quick view

MOTOROLA MVME147S-1 VME Single-Board Computer

Technical Specifications
  • Microprocessor:
    • 16, 25, or 33.33 MHz MC68030 enhanced 32-bit microprocessor with on-chip cache memory for both instructions and data, increasing processor efficiency by 20% to 40%.
    • Optional 16, 25, or 33.33 MHz MC68882 floating-point coprocessor for enhanced numerical computation capabilities.
  • Memory:
    • 4, 8, 16, or 32MB shared DRAM with programmable parity checking.
    • 4K x 8 SRAM with battery backup for real-time clock and data retention.
    • Four 28/32-pin sockets for ROM/PROM/EPROM/EEPROM (16-bit wide).
  • VMEbus Interface:
    • A32/D32 VMEbus master/slave interface with system controller functionality.
    • Supports 4-level requester, 7-level interrupter, and 7-level interrupt handler for VMEbus operations.
Read more
Quick view

Motorola MVME162-213 Embedded Controller

Technical Specifications:
  • Processor:
    • 25 MHz or 32 MHz MC68040 enhanced 32-bit microprocessor with 8KB cache, MMU (Memory Management Unit), and optional FPU (Floating-Point Unit).
    • Alternatively, a 25 MHz MC68LC040 enhanced 32-bit microprocessor (without FPU) is available.
  • Memory:
    • 4MB, 8MB, or 16MB shared DRAM with parity protection (expandable up to 64MB via expansion mezzanine).
    • 512KB SRAM with battery backup for non-volatile storage.
    • 1MB flash memory for firmware or user-installed applications.
    • 8K x 8 NVRAM with battery backup for clock and critical data retention.
Read more
Quick view

Motorola MVME2100 VMEbus Single Board Computer (SBC)

Technical Specifications:
  • Processor:
    • Typically equipped with an MPC8240 or PowerPC 603e processor (32-bit PowerPC architecture).
    • Clock speeds range from 200 MHz to 400 MHz, supporting high-performance computing tasks like real-time data processing and complex algorithm execution.
    • Integrated 16 KB L1 instruction cache and 16 KB L1 data cache to enhance instruction execution efficiency.
  • Memory:
    • Onboard 32 MB or 64 MB SDRAM (synchronous dynamic random-access memory) with optional ECC (Error-Correcting Code) protection for data reliability.
    • 1 MB flash memory (via two 32-pin PLCC/CLCC sockets) for firmware storage.
    • Supports 4 MB or 8 MB surface-mount flash memory (64-bit interface) for large-capacity storage needs.
    • 8 KB NVRAM (non-volatile random-access memory), with 4 KB available for user-defined critical configuration data.
Read more
Quick view

Motorola MVME2400-0361

Technical Specifications
  • Processor:
    • PowerPC 750 (MPC750) microprocessor, clocked at up to 450 MHz, offering low power consumption and high performance for embedded systems.
  • Memory:
    • Up to 512 MB ECC SDRAM for error-corrected data storage.
    • 128 MB Flash ROM for firmware and application storage.
    • 1 MB NVRAM with battery backup for non-volatile data retention.
  • VMEbus Interface:
    • Supports VME64 bus (version 3.x) with high bandwidth and data transfer rates.
    • 6U VMEbus form factor for compatibility with standard industrial enclosures.
Read more
Quick view

Motorola MVME2434 VMEbus Processor Module

Technical Specifications:
  • Processor:
    • PowerPC 750 32-bit RISC microprocessor with floating-point unit (FPU) and memory management unit (MMU).
    • Clock speed: Typically 200–400 MHz (specific models may vary).
    • Cache: 32 KB L1 instruction cache and 32 KB L1 data cache.
    • Back-End Cache: 1 MB secondary cache for enhanced performance.
  • Memory:
    • SDRAM: 32 MB to 512 MB board-mounted ECC SDRAM (Error-Correcting Code) for data integrity.
    • Flash Memory: 1 MB or 4 MB (depending on configuration) for firmware storage.
    • NVRAM: 8 KB non-volatile RAM with battery backup for critical data retention.
Read more
Quick view

Motorola MVME5100

Technical Specifications:
  • Processor: Supports PowerPC-based microprocessors (e.g., MPC7410, MPC750, MPC755) with clock speeds up to 1.5 GHz, offering high performance and low power consumption.
  • Memory:
    • 128 MB SDRAM (expandable to 1 GB via mezzanine cards).
    • 2 GB IDE or solid-state drive (SSD) for storage.
  • I/O Interfaces:
    • 2x RS-232C serial ports.
    • Dual 10/100BaseTX Ethernet ports for high-speed networking.
    • PCI and CompactFlash slots for peripheral expansion.
Read more
Quick view