Triconex 5382

• Processor and Memory Parameters
  • It is equipped with a 32-bit TriCore VME processor that delivers powerful computing capabilities to support the rapid execution of complex safety control logic.
  • It has 16 MB of RAM for real-time data processing and 2 MB of Flash ROM for storing system programs and configuration data, ensuring stable data storage and quick access.
• Communication and Backplane Parameters
  • It is configured with serial ports and Ethernet ports for data interaction with upper monitoring systems and external devices.
  • It uses the TriBus backplane with a communication rate of 25 Mbps, which guarantees efficient and stable data transmission between the module and matching I/O modules.
  • It supports connection with an RS-232 optical isolation interface, which enhances the module's anti-interference ability during communication.

• Output and Signal Parameters
  • It has 4 common - return, DC - coupled output channels, with a 12 - bit resolution and an output accuracy of less than 0.25% of the full - scale range within the 4 - 20mA controlled current range.
  • The output current can reach an over - range of 0 - 22mA and also has a 0mA output capability, with a step function response time of less than 2ms.
  • The typical switch time when a channel fails is 1ms, and the maximum switch time does not exceed 3ms.
• Power and Loop Parameters
  • The nominal external loop power supply is 24V DC, and the maximum allowable voltage is 32V DC, with reverse voltage protection.
  • For a 300Ω load, the loop power supply needs to be over 16V DC with a minimum current of 1A; for an 800Ω load, the loop power supply must be over 28V DC with a minimum current of 1A.
  • It has continuous over - range protection against 36V DC and 0V DC, which effectively protects the internal circuitry from damage due to abnormal voltage.

• Electrical Parameters
  • It provides 32 commoned output channels with a nominal voltage of 24 VDC and a voltage adaptation range of 16 - 32 VDC, and can withstand a maximum voltage of 36 VDC.
  • Each output point has a maximum current of 1.7 A, a surge current of 7 A within 10 milliseconds, a minimum required load current of 10 mA, and a maximum load leakage current of 4 mA.
  • The typical voltage drop is less than 2.8 VDC at 1.7 A, the power module load is less than 13 watts, and the point isolation voltage reaches 1500 VDC to avoid electrical interference between circuits.
• Physical Parameters
  • The module weighs 0.8 kg and has dimensions of 16cm × 16cm × 12cm, featuring a compact and lightweight design that facilitates installation in various industrial control cabinets.
  • It adopts an IP20-rated enclosure and is equipped with dedicated LED indicators for each output point to show on/off states, as well as module status indicators for pass, fault, load, and active conditions.

Technical Specifications

• Processor: Equipped with triple modular redundancy (TMR) architecture for enhanced reliability and fault tolerance
• Communication Interfaces: Supports multiple communication protocols such as Modbus, Ethernet, and proprietary Triconex protocols for integration with different systems
• Memory: Sufficient onboard memory for storing application programs and data, ensuring reliable operation without data loss
• Power Supply: Operates on standard industrial power supplies, typically 24V DC or 110/230V AC depending on configuration
• Operating Temperature: Designed for stable operation within industrial environments, generally from -20°C to +60°C