Triconex 4000189-560

Technical Specifications:

• It is designed for high availability and fault tolerance, ensuring continuous operation even in the event of hardware failures.
• The system supports safety integrity levels up to SIL 3 according to IEC 61508, making it suitable for critical safety applications.
• It operates with a triple modular redundant (TMR) architecture where three independent systems process data simultaneously and compare results to ensure accuracy and reliability.

• • Processor and Memory Parameters
    • It is equipped with a 32-bit Motorola MPC860 processor running at a clock speed of 50 MHz, which efficiently supports the operation of complex control logic.
    • It is configured with 6MB Flash PROM for stable storage of application programs, 16MB DRAM for running programs and storing sequence of events data, and 8KB NVRAM dedicated to maintaining variables.
  • I/O and Power Parameters
    • It is equipped with 8 digital input channels, 8 digital output channels, 4 analog input channels, and 4 analog output channels. It supports input types such as dry contacts, photoelectric signals and analog signals, and output types including relays and transistors.
    • The digital output current reaches 500mA, the typical input voltage is 24V DC, and some models can support 5V DC input. The module has a rated power of 12W.

• Input and Signal Parameters
  • It is configured with 32 digital input channels, supporting 24V AC/DC input voltage, with a recommended input voltage range of 20 - 42.5V DC and a maximum allowable voltage of 42.5V AC/DC.
  • It accommodates DC signals and AC signals within the 47 - 63Hz frequency range, and achieves optical isolation between the field side and the Tricone system to prevent electromagnetic interference.
  • The response time of the module is less than 1ms, enabling rapid capture and transmission of field signal changes to meet real-time control requirements.
• Physical and Environmental Parameters
  • The module weighs approximately 0.5 kilograms, with dimensions of 120mm x 80mm x 35mm, and features a compact structure suitable for installation in 19-inch standard DIN rail racks.
  • Its operating temperature ranges from -40°C to 70°C, and the storage temperature spans from -40°C to 85°C. It operates stably in environments with 5% - 95% relative humidity without condensation, and has a protection level of IP20.

• Technical Specifications
  • Electrical and Signal Parameters
    • It is equipped with 16 non-commoned independent output channels, with a nominal output voltage of 24 VDC and a voltage adaptation range of 22 - 45 VDC.
    • Each channel can carry a current of 2A, and the signal response time is less than 1ms, enabling rapid execution of control commands.
    • It adopts optical isolation technology, with a point-to-point isolation voltage of 1500 VDC, which can effectively prevent electrical interference between channels and external circuits.
  • Physical and Weight Parameters
    • Its dimensions are 49cm × 45.3cm × 6.8cm, and it is designed for 19-inch rack mounting, which is consistent with standard industrial control cabinet installation specifications.
    • The weight of the module is 3.65 kg, and its solid structure ensures stability during long-term operation.
  • Environmental Parameters
    • The operating temperature range is -40°C to 85°C, which allows it to adapt to the extreme temperature fluctuations of various outdoor and indoor industrial sites.
    • It can work normally in an environment with a relative humidity of 0% - 95% (non-condensing), resisting the impact of humid air on internal components.