Triconex 3806E

• Triconex 3009 是一款三重冗余控制器，支持符合 IEC 61508 的安全完整性等级 3 (SIL 3)，确保高可靠性和容错能力。
• 它可以在恶劣的环境条件下运行，并具有适合工业环境的特定温度范围。
• 支持各种输入/输出模块，以便与传感器、执行器以及过程控制和安全功能所需的其他现场设备进行接口。
• 配备通信接口，可与分布式控制系统 (DCS)、监控和数据采集 (SCADA) 系统以及其他工厂范围的网络无缝集成。

• Input and Signal Parameters
  • It is configured with 32 digital input channels, supporting 24V AC/DC input voltage, with a recommended input voltage range of 20 - 42.5V DC and a maximum allowable voltage of 42.5V AC/DC.
  • It accommodates DC signals and AC signals within the 47 - 63Hz frequency range, and achieves optical isolation between the field side and the Tricone system to prevent electromagnetic interference.
  • The response time of the module is less than 1ms, enabling rapid capture and transmission of field signal changes to meet real-time control requirements.
• Physical and Environmental Parameters
  • The module weighs approximately 0.5 kilograms, with dimensions of 120mm x 80mm x 35mm, and features a compact structure suitable for installation in 19-inch standard DIN rail racks.
  • Its operating temperature ranges from -40°C to 70°C, and the storage temperature spans from -40°C to 85°C. It operates stably in environments with 5% - 95% relative humidity without condensation, and has a protection level of IP20.

• • Electrical Parameters
    • The nominal output voltage is 120 VDC, with a voltage range of 90 - 150 VDC and a maximum withstand voltage of 160 VDC. The typical voltage drop of the module is less than 1.5 V, and the power module load is less than 10 watts.
    • Each output point has a maximum current of 0.8 A, a surge current of 4 A within 10 milliseconds, a minimum required load current of 30 mA, and a maximum load leakage current of 4 mA.
    • The field terminal is equipped with a 1 A fast - acting fuse, and the point isolation voltage can reach 1500 VDC / 2500 VDC, which can effectively isolate electrical interference.
  • Physical and Indicator Parameters
    • The module weighs 5000 grams, and its shell adopts a steel - blue robust structure, which can adapt to the installation and use of various industrial control cabinets.
    • It is equipped with multiple diagnostic indicators, including pass, fault, active and power indicators for overall module status, as well as an independent load indicator for each output point, which can directly reflect the working state of the module and each output point.

Technical Specifications:

• Type: Typically serves as an interface or communication module within the Tricon system.
• Communication Protocols: Supports industry-standard protocols to ensure compatibility with various control systems and devices.
• Power Supply: Operates within specified voltage ranges suitable for industrial environments.
• Environmental Endurance: Designed to withstand harsh conditions including wide temperature ranges, humidity, and exposure to dust.
• Certifications: Certified for use in Safety Instrumented Systems (SIS) up to Safety Integrity Level 3 (SIL 3), ensuring compliance with stringent safety standards.