Bently Nevada 165335-01 2-Wire Vibration Transmitter - Image 1
Bently Nevada 165335-01 2-Wire Vibration Transmitter - Image 2
Click to enlarge
Bently Nevada 165335-01 2-Wire Vibration Transmitter
Bently Nevada 165335-01 2-Wire Vibration Transmitter - Image 2
Bently Nevada 125680-01 3300 XL Eddy Current Probe Extension Cable
Bently Nevada 125680-01 3300 XL Eddy Current Probe Extension Cable
Back to products
Bently Nevada 170110-01 24V DC Power Supply Module
Bently Nevada 170110-01 24V DC Power Supply Module

Bently Nevada 165335-01 2-Wire Vibration Transmitter

Technical Specifications

  • Brand: Bently Nevada
  • Model: 165335-01
  • Type: 2-Wire Loop-Powered Vibration Transmitter
  • Power Supply: 12 to 36 VDC (typical 24 VDC)
  • Operating Temperature: -40 °C to +150 °C
  • Operating Humidity: Up to 100% condensation
  • Environmental Protection Rating: IP65
  • Sensing Range: 0.0001 mm to 10 mm (vibration amplitude); 0 to 20 mm/s RMS (velocity)
  • Resolution: 0.0001 mm; 0.001 μm per mm/s
  • Accuracy: ±0.25% full scale; ±1% of reading
  • Frequency Response: 1 Hz to 1 kHz (standard); 10 Hz to 1 kHz (typical)
  • Output Signal: 4-20 mA linear current
  • Proximitor Sensor Compatibility: 3300 NSV proximity probes
  • System Length Options: 5m and 7m (with matching extension cables)
  • Pro X Out Linear Range: 1.4 mm (55 mils), starting from 0.25 mm (10 mils) from target surface
  • Pro X Out Incremental Scale Factor: Calibrated for precision signal transmission
  • Output Impedance: 10 kΩ (Pro X Out), calibrated for 10 MΩ load
  • Power-On Suppression: Signal output remains below 3.6 mA (Not Ok) for 2-3 seconds
  • Dimensions: 120 mm × 80 mm × 50 mm
  • Weight: 250 g
  • Mounting Options: DIN rail clips, bulkhead mounting screws
  • Communication: HART communication (for configuration and diagnostics)
Category:
Description

Function Features

  • Integrated Proximitor Sensor: Eliminates the need for external sensor units, simplifying system design and installation
  • Precise Signal Processing: Converts weak vibration signals into accurate 4-20 mA output for reliable data transmission
  • Diagnostic Capabilities: Features non-isolated “Pro X Out” and “Com” terminals, plus coaxial connector for dynamic vibration and gap voltage signal outputs
  • Fault Protection Circuit: “Not Ok/Signal Defeat” function prevents high output or false alarms caused by probe failures or loose connections
  • Easy Calibration: Non-interactive zero and span potentiometers enable convenient loop adjustment
  • Quick Verification: Test input pins allow fast validation of loop signal output using a function generator
  • Compact & Rugged Design: Potted construction ensures durability in high-humidity and harsh industrial environments
  • Space-Saving Installation: Compatible with low-clearance sensor mounting, ideal for compact machinery
  • Seamless System Integration: 4-20 mA output ensures compatibility with PLC, DCS, and other industrial control systems
  • User-Friendly Operation: Supports HART communication for easy setup and access to critical data
  • Maintenance-Free Performance: Long-lasting design reduces operational and maintenance costs
  • Wide Compatibility: Works with non-grounded portable test equipment; requires 122115-01 test adapter for grounded AC-powered equipment

Application Scenarios

  • Centrifugal Air Compressors: Primary application for OEMs, monitoring vibration to ensure stable operation
  • Rotating Machinery: Monitors motors, pumps, fans, and blowers in industrial settings
  • Power Generation: Protects turbines, generators, and auxiliary equipment in thermal and hydropower plants
  • Oil & Gas Industry: Monitors pumps, compressors, and rotating equipment in drilling and refining operations
  • Chemical Processing: Ensures reliability of process pumps, mixers, and agitators in harsh chemical environments
  • Manufacturing Facilities: Supports predictive maintenance for production line machinery and automation equipment
  • HVAC Systems: Monitors fans and compressors to maintain system efficiency and prevent breakdowns
  • Mining Operations: Protects heavy-duty pumps, conveyors, and processing machinery
  • Food & Beverage Industry: Monitors rotating equipment in hygienic production environments
  • General Industrial Maintenance: Enables proactive maintenance for any rotating machinery requiring continuous vibration monitoring
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Bently Nevada 165335-01 2-Wire Vibration Transmitter”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

BENTLY 3500/15 127610-01

Technical Specifications
  • Power Supply Module:
    • Input Voltage: 100–240 VAC, 50/60 Hz, 2 A.
    • Output Voltage: 24 VDC (5.5 A max for single power supply; 7.5 A max for redundant setup).
    • Power Capacity: 190–250 W (adjustable based on load).
    • Operating Temperature: 0°C to 60°C (storage: -40°C to 70°C).
    • Protection: Overload, short-circuit, and overvoltage protection.
    • Certifications: Complies with CCC and industrial safety standards.
Read more
Quick view

Bently Nevada 125704-01 Versatile I/O & TMR Relay Module

Technical Specifications

  • Manufacturer: Bently Nevada (Baker Hughes)
  • Product Type: Versatile I/O Module with TMR Relay Functionality
  • Input Channels: 4 sensor inputs (supports 2-wire/3-wire accelerometers, velocity sensors, proximitor sensors); 4 temperature inputs
  • Temperature Input Compatibility: E, J, K, T-type thermocouples; 2-wire/3-wire RTDs
  • Output Channels: 6 relay outputs; 4 configurable 4-20 mA recorder outputs; 1 dedicated buffer output per sensor input
  • Relay Specifications: SPDT relay type; 10 A current rating (120V AC); 5 A current rating (120V AC/DC)
  • Operating Voltage: 120V AC/DC
  • Communication Protocols: Modbus RTU, Ethernet/IP, Profinet, RS-485; optional Modbus gateway support
  • Communication Interfaces: Ethernet port; software-configurable RS232/485 serial ports
  • ADC Resolution: 24-bit
  • Frequency Range: 0.5 Hz to 200 Hz
  • Operating Temperature Range: -40°C to 85°C
Read more
Quick view

Bently Nevada 130539-25 3500/62 PLC Process Variable Monitor Card

Technical Specifications

  • Manufacturer: Bently Nevada
  • Product Type: PLC Process Variable Monitor Card
  • Series Compatibility: 3500 Series Monitoring System
  • Input/Output Configuration:
    • Analog input channels: 8 channels (compatible with magnetic pickup sensors and proximity probes)
    • Analog output channels: 8 channels
  • Input Signal Specifications:
    • Compatible sensor types: Magnetic pickup sensors, proximity probes
    • Input signal range: Configurable for standard industrial process variables
  • Power Requirements:
    • Input voltage: 12 VDC
  • Environmental Ratings:
    • Operating temperature: -40 °C to +90 °C
    • Storage temperature: -40 °C to +100 °C
    • Vibration resistance: Compliant with industrial vibration standards for rack-mounted equipment
    • Electrical interference immunity: Meets EMC industrial standards
Read more
Quick view

Bently Nevada 19000-00-90-18-02 Universal Machinery Monitoring System

Technical Specifications

  • Measurement & Input Parameters
    • Sensor inputs: 4 channels (supports 2-wire/3-wire accelerometers, velocity sensors, proximitor sensors)
    • Temperature inputs: 4 channels (compatible with E, J, K, T-type thermocouples; 2-wire/3-wire RTDs)
    • Frequency response: 0.5 Hz to 200 Hz
    • ADC resolution: 24-bit
    • Data acquisition: High-speed with advanced signal processing algorithms
  • Output Parameters
    • Relay outputs: 6 configurable channels (programmable based on normal, alarm, danger states)
    • Recorder outputs: 4 configurable 4–20 mA channels (transmits data for any variable from any channel)
    • Buffer outputs: 1 dedicated channel per sensor input (direct signal transmission)
  • Electrical Parameters
    • Operating voltage: 24 V DC; 100–240 V AC, 50/60 Hz
    • Input voltage range: 18–32 V DC, 2.5 A
    • Communication protocols: Ethernet/IP, Profinet, Modbus RTU, CAN, RS232/485
    • Communication interfaces: Ethernet port, software-configurable RS232/485 serial port, USB
    • Modbus gateway: Supports data transmission to Modbus clients (static variables, status, event logs, time/date)
Read more
Quick view

Bently Nevada 21000-16-05-00-050-04-02 Proximity Probe Housing Assembly

Technical Specifications

  • Product Type: Proximity Probe Housing Assembly
  • Compatible Probe: 8mm 3300 XL proximity probe with connector
  • Probe Cable Length: 0.5 meters (20 inches)
  • Standoff Adapter: No standoff adapter included
  • Probe Penetration: 5.0 inches
  • Fittings Option: One 3/4-14 NPT plug only
  • Mounting Thread: 3/4-14 NPT
  • Construction Material: Aluminum body with 304 stainless steel sleeve
  • Housing Body Diameter: 83.3 mm
  • Weight: 1.1 kg (typical, without fittings)
  • Operating Temperature Range: -51 °C to +177 °C (-60 °F to +351 °F)
  • Protection Rating: CSA Type 4, IP67
  • Certifications: CSA approved for hazardous areas, API 670 compliant
  • Country of Origin: USA
Read more
Quick view

Bently Nevada 3500/15 127610-01 – High-Reliability AC Power Supply Module

Technical Specifications

  • Input Parameters:
    • Voltage Range: 100–240 VAC (50/60 Hz) with wide compatibility for global power systems .
    • Input Current: ≤2 A at full load (24 VDC, 5 A output) .
    • Efficiency: ≥94% under typical load conditions, minimizing energy loss .
  • Output Parameters:
    • Voltage: 24 VDC with ±1% regulation to ensure stable power delivery .
    • Maximum Current: 5 A continuous, supporting up to 14 monitoring modules in a 3500/05 rack .
    • Ripple Noise: <100 mV peak-to-peak for sensitive industrial electronics .
Read more
Quick view

BENTLY NEVADA 3500/15 133292-01 LOW-VOLTAGE DC POWER MODULE

Technical Specifications:
  • Input Channels: Supports multiple input channels for connecting proximity probes, velocity sensors, and accelerometers, allowing comprehensive monitoring of machinery vibration and position.
  • Communication Interfaces: Equipped with standard communication interfaces such as Modbus/TCP or Ethernet, facilitating integration with distributed control systems (DCS) and other plant management networks.
  • Processor Capability: Features robust processing capabilities to handle real-time data acquisition, analysis, and alarming functions efficiently.
  • Power Supply: Operates on a specific voltage range suitable for industrial environments, with options for redundant power supplies to ensure uninterrupted operation.
  • Environmental Tolerance: Designed to withstand harsh industrial conditions, including resistance to temperature extremes, humidity, and electromagnetic interference.
Read more
Quick view

Bently Nevada 3500/22M 288055-01 – Transient Data Interface Module (TDI)

Technical Specifications:

  • Type: Proximity Transducer Driver Module
  • Compatibility: Designed to fit into the Bently Nevada 3500 series rack system.
  • Channels: Typically supports multiple channels (e.g., up to 6 channels) depending on the configuration, allowing for monitoring of several machine positions simultaneously.
  • Input Voltage: Operates within specified voltage ranges suitable for industrial environments.
  • Environmental Tolerance: Engineered to withstand harsh industrial conditions including temperature extremes, humidity, and electromagnetic interference.
  • Certifications: Meets industry standards for safety and reliability, ensuring suitability for use in critical applications.
Read more
Quick view