GE IS200JPDMG1ACC S1AT005-09 - Image 1
Click to enlarge
GE IS420PPNGH1A
GE IS420PPNGH1A
Back to products
ABB REC670
ABB REC670

GE IS200JPDMG1ACC S1AT005-09

Technical Specifications
  • Voltage: 28V
  • Connector Current: 25A
  • Dimensions: Approximately 16.51 cm x 17.8 cm
  • Temperature Range: – 30°C to 65°C
  • Approval Rating: Class 1 Div 2
Category:
Description
Functional Features
  • Power Distribution
    • It accepts redundant power inputs and distributes power to other system boards. For example, it can distribute 125V DC power to relevant components in the system.
  • Status Feedback
    • Provides full – status feedback via a connection with a PPDA I/O pack. This feedback includes detection of bus magnitude, ground faults, and excessive AC voltage on the DC bus.
  • Reliability
    • The module can operate with any combination of one or more active inputs, resulting in a high – reliability power source for the control system. It also meets the Class 1 Div 2 approval rating, indicating its suitability for use in hazardous locations.
Application Scenarios
  • Power Generation
    • Suitable for thermal power generation, hydroelectric power generation, nuclear power generation, wind power generation, etc.
  • Industrial Manufacturing
    • Can be used in steel manufacturing, chemical manufacturing, automotive manufacturing, aviation manufacturing, etc.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “GE IS200JPDMG1ACC S1AT005-09”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

GE 239-RTD-AN Motor Protection Relay with RTD Inputs

unctional Features

  1. Advanced Protection Algorithms
    • 15 Thermal Curves: Configurable overload curves to match motor characteristics .
    • RTD Monitoring: Direct integration with PT100/PT1000 sensors for real-time winding temperature tracking (±0.5% accuracy) .
  2. Operational Flexibility
    • Programmable Outputs: Customizable relay actions for alarms, trips, or process signals (e.g., motor load percentage) .
    • Test Mode: Simulates faults without activating outputs for system validation .
Read more
Quick view

GE 469-P5-HI-A20-E-H Motor Management Relay

Technical Specifications:
  • Voltage Rating: Designed to operate within standard industrial control voltages, typically compatible with 125 VDC or 250 VDC control systems.
  • Current Input: Accepts standard current transformer (CT) inputs such as 1 A or 5 A, enabling integration with various generator monitoring setups.
  • Communication Interfaces: Equipped with multiple communication options including Modbus RTU over RS-485, and optionally Ethernet for integration into SCADA and distributed control systems.
Read more
Quick view

GE IC698CMX016-ED VMIVME-5567-000 350-005567-000 E

Technical Specifications

  • IC698CMX016-ED Control Memory Exchange Module
    • Memory: 16 MB SDRAM with parity for reflective memory data storage .
    • Communication:
      • Fiber Optic Interface: 2.12 Gbaud transmission rate over multimode fiber (LC connectors), supporting up to 300 meters .
      • Network Nodes: Up to 256 nodes in a daisy-chained loop configuration .
      • Packet Sizes: Dynamic 4–64 bytes, achieving 43–174 MB/s transfer rates .
Read more
Quick view

GE IC698CPE040-FJ Central Processing Unit Designed for RX7i PACSystems

Procurement Guidance

  1. Compatibility Notes
    • Valid for RX7i/RX3i PACSystems; firmware suffixes (e.g., -FJ) denote specific variants .
    • Backward-compatible with legacy GE PLCs (e.g., Series 90-70) .
  2. Critical Accessories
    • IC698ACC701 Lithium Battery: Mandatory for RAM backup .
    • VME I/O Modules: e.g., DS200 series for signal distribution .
  3. Avoid Mismatched Claims
    • "512 MB RAM" → Refers to GE IC698CPE030 model .
    • "3AC 400V Input" → Applies to power modules, not CPU logic .
  4. Warranty & Authenticity
    • 12-month warranty for factory-sealed units; verify holographic seals .
    • Cross-check part number 3BHE030579R0003 for industrial-grade variants .
Read more
Quick view

GE IS215UCVEH2AE

The GE IS215UCVEH2AE is a VMEbus-based controller card designed for mission-critical industrial control systems, particularly within GE's Mark VI Speedtronic Turbine Control System. It serves as the central processing unit (CPU) for managing real-time operations in gas and steam turbines, ensuring precise control and monitoring of rotational speed, load, and safety parameters.
Read more
Quick view

GE RS-FS-9001 362A1052P004 – Complete Technical Profile

Technical Specifications:
  • Designed as part of the Mark VI or Mark Vie control system family, which are widely recognized for their application in gas and steam turbine controls.
  • Supports various input/output configurations tailored to handle signals from sensors, actuators, and other field devices integral to turbine operations.
  • Capable of operating within specific voltage ranges and environmental conditions suitable for industrial settings.
  • Equipped with robust communication capabilities that facilitate integration with broader plant networks and SCADA systems.
Read more
Quick view

GE VMIVME-2540 Intelligent Counter/Controller

Technical Specifications:

  • Module Type: 16-channel analog-to-digital input module for VMEbus systems.
  • Input Resolution: 16-bit resolution ensures high accuracy and fine signal discrimination across the measurement range.
  • Input Voltage Ranges: Supports multiple selectable input ranges including ±10 V, ±5 V, 0–10 V, and 0–5 V, accommodating a wide variety of sensor and transducer outputs.
  • Sampling Rate: Capable of high-speed data acquisition with a per-channel sampling rate up to 100 kHz, enabling real-time monitoring of fast-changing signals.
  • Analog Inputs: Features 16 single-ended or 8 differential input channels, providing flexibility in signal connection and noise rejection.
Read more
Quick view

GE VMIVME-7740-840 350-07740-840-M – High-Performance VME Single-Board Computer

Technical Specifications:

  • Processor: Equipped with a powerful processor suitable for industrial computing needs. The exact model can vary but often includes options such as PowerPC or other high-performance processors.
  • Memory: Supports substantial RAM capacity to handle complex tasks efficiently. Also includes onboard flash memory for storage.
  • Expansion Slots: Features multiple VMEbus slots allowing for flexible system expansion and integration with other VMEbus compatible modules.
  • Communication Interfaces: Includes Ethernet ports, serial interfaces, USB ports, and potentially other communication interfaces for versatile connectivity options.
  • Environmental Ratings: Designed to operate under specific temperature ranges and conditions suitable for harsh industrial environments.
  • Operating System Support: Compatible with various operating systems including VxWorks, Linux, and others depending on configuration and application requirements.
Read more
Quick view