Shop

• • Electrical Parameters
    • The input voltage range covers 10.5V to 30V RMS, and the output voltage range is 0V to 10V RMS. The maximum output current reaches 24 amperes, and the maximum working frequency is 2500 Hz, with a control accuracy of ±1%.
    • The power consumption is optimized for energy efficiency. The galvanic isolation design is adopted, and the isolation voltage meets industrial anti-interference standards, which can effectively reduce the impact of electrical noise on the system.
  • Physical Parameters
    • There are differences in dimensions and weight among different versions. One common version has dimensions of approximately 15.9 cm × 14.7 cm × 8.1 cm and weighs about 1.13 kilograms. Another version has dimensions of 16 cm × 16 cm × 12 cm and a weight of 0.8 kilograms, and there is also a model weighing 1.36 kilograms, which is compact and convenient for installation in standard control cabinets.

Technical Specifications

• Processor: Equipped with triple modular redundancy (TMR) architecture for enhanced reliability and fault tolerance
• Communication Interfaces: Supports multiple communication protocols such as Modbus, Ethernet, and proprietary Triconex protocols for integration with different systems
• Memory: Sufficient onboard memory for storing application programs and data, ensuring reliable operation without data loss
• Power Supply: Operates on standard industrial power supplies, typically 24V DC or 110/230V AC depending on configuration
• Operating Temperature: Designed for stable operation within industrial environments, generally from -20°C to +60°C

• Electrical Parameters
  • It is equipped with 32 digital input channels, and each channel has independent electrical isolation performance, with an isolation voltage of 1500V AC between the channels and the ground.
  • The standard input voltage is 24 VDC, the typical input current is 2.5 mA, and the maximum input current is 3.3 mA. The power consumption of the whole module is less than 5 W.
  • The response time of the input signal is less than 2 ms, which can quickly capture the changes of on - site equipment signals and ensure the real - time performance of system control.
• Physical Parameters
  • Its overall dimensions are 171mm × 89mm × 46mm, and the weight is about 0.9 kg to 1 kg, which is compact and easy to install in limited control cabinet space.
  • It supports DIN rail installation and rack - mounted installation. The screw terminal design is adopted for wiring, which is firm and not easy to loose, reducing the risk of poor contact.

Technical Specifications:

• Type: Typically serves as an interface or communication module within the Tricon system.
• Communication Protocols: Supports industry-standard protocols to ensure compatibility with various control systems and devices.
• Power Supply: Operates within specified voltage ranges suitable for industrial environments.
• Environmental Endurance: Designed to withstand harsh conditions including wide temperature ranges, humidity, and exposure to dust.
• Certifications: Certified for use in Safety Instrumented Systems (SIS) up to Safety Integrity Level 3 (SIL 3), ensuring compliance with stringent safety standards.

• Electrical Parameters
  • It supports active analog current output with ranges of 4 to 20 mA and 0 to 1 mA, and the accuracy of the 4 to 20 mA range reaches ±1% of full scale.
  • The maximum load for the 4 to 20 mA range is 1200 ohms, while the maximum load for the 0 to 1 mA range is 10 k ohms. It achieves 36 Vpk isolation from RTDs and analog inputs to avoid signal interference.
  • It is equipped with 4 assignable outputs that can be configured for parameters such as phase currents, phase voltages, three - phase average power, and motor load torque as required.
• Physical Parameters
  • Its overall dimensions are 45 cm × 20 cm × 15 cm, and it weighs 3 kg, which is suitable for installation in standard industrial control cabinets.
  • It adopts a modular structural design that conforms to the installation standards of Triconex series modules, facilitating quick assembly with the system chassis and later disassembly for maintenance.

• Electrical Parameters
  • It supports multiple analog input ranges, including 0 - 10V, -10V to 10V, 4 - 20mA, and 0 - 20mA, covering the signal requirements of most industrial field sensors.
  • It has a measurement accuracy of ±0.1% and a resolution of 12 bits, and the signal update rate reaches 250ms, which can ensure the accuracy and real-time performance of data collection.
  • It uses a 24VDC power supply, with a power consumption of only 5W, which will not add excessive power burden to the overall safety system.
• Physical Parameters
  • Its overall dimensions are 110mm × 45mm × 22mm, and its weight is 150g. The compact and lightweight design allows it to be flexibly installed in control cabinets with limited space.
  • It is equipped with screw-type terminals, which can provide firm wiring connections and avoid poor contact caused by vibration in industrial environments.