Shop

Technical Specifications

• Input Voltage: 110-220V AC
• Output Voltage: 24V DC
• Output Current: 10A
• Redundancy Mode: 1+1 redundancy
• Dimensions: 89mm × 32mm × 100mm
• Weight: 0.25kg
• Indicator Light: Equipped with LED indicator lights to display the working status of the module, such as power-on status, normal operation, and fault status
• Hot Swap: Supported, enabling replacement of the module without shutting down the system, reducing maintenance downtime

Technical Specifications

• Electrical Parameters
  • Continuous torque: 0.3 - 48 Nm
  • Rated power: 0.1 - 7.5kW
  • Rated current: 50A
  • Rated speed: 100 rpm
  • Encoder type: Single-turn and multi-turn high-resolution absolute encoders are optional
• Environmental and Protective Parameters
  • Operating temperature: -40°C to 85°C
  • Protection level: The shell meets the IP65 protection level, and the self-cooling meets the IP67 protection level (excluding the shaft and joints)
• Physical Parameters
  • Dimensions: 20mm×30mm×40mm
  • Weight: 50kg

Technical Specifications

• Power Supply Parameters
  • Input voltage options: 19.2-28.8VDC, 90-146VDC, 120/240VAC (voltage selection via jumper).
  • Total output power limit: The sum of all output powers (5V backplane, 24V backplane and 24V user power supply) shall not exceed 70W.
  • Power supply output current: At 5V DC, the current is 10A; at 24V DC, the current is 2.88A.
  • Power failure resistance: It can withstand short-term power failures, and power failures will not affect the system operation for 20ms-3s.
• Structural Parameters
  • Installation method: The matching power supply is installed on the left side of the chassis with two screws.
  • Indicator light: The matching power supply is equipped with an LED, which lights up when the power supply is working normally.

• Input Voltage: Typically 24V DC, adaptable to specific application requirements.
• Digital Input/Output: Supports multiple digital signal input/output channels, configurable based on model and application needs.
• Analog Input/Output: Capable of handling analog signal inputs and outputs, with configuration options to suit diverse industrial control requirements.
• Processor: Equipped with a 1.2 GHz DSP (Digital Signal Processor) chip for high-speed computation and efficient data processing.

• Input Voltage: 48 - 220 VDC
• Output Voltage: 5 VDC and 24 VDC
• Output Current: 15 A at 5 VDC, 0.4 A at 24 VDC
• Power Output: Approximately 85 W
• Dimensions: 11 cm * 16.5 cm * 8.3 cm
• Weight: 0.4 kg
• Operating Temperature Range: - 25°C to +70°C

Technical Specifications

• Electrical Parameters
  • Power supply: 24V DC.
  • CPU: Dual-core processor with a main frequency of up to 1.3GHz.
  • Maximum input current: 0.5A.
  • Output voltage: 0-10V DC.
  • Output current: 0-20mA.
  • Power: 10W.
  • I/O points: Expandable up to 256.
• Communication Parameters
  • Communication interfaces: Ethernet/IP, PROFIBUS DP, RS-232, RS-485.
  • Supports multiple communication protocols to realize data transmission and exchange with other devices and systems.
• Environmental Parameters
  • Operating temperature range: -40°C to 85°C.
  • Storage temperature range: -55°C to 125°C.
• Physical Parameters
  • Dimensions: 192mm × 64mm × 35mm.
  • Weight: 0.5kg.
  • Installation method: Rack-mounted installation.