ZYGO ZMI-2002 8020-0211-1-J Precision Measurement System
Technical Specifications:
- The ZMI-2002 operates based on innovative interferometry principles, offering nanometer-level precision for surface form measurements.
- It supports a wide range of optical configurations to accommodate diverse measurement needs.
- Capable of providing high-resolution data, which ensures accurate characterization of surfaces and components.
KUKA KSD1-08 Servo Drive Module – Complete Technical Profile
Technical Specifications:
- The KSD1-08 is part of a series of drive systems tailored for dynamic and efficient operation of robotic arms and similar machinery.
- It supports various communication protocols essential for integration within complex automation systems.
- Capable of handling significant power loads while maintaining high efficiency and minimal heat generation, ensuring reliable performance over extended periods.
GE IS220PSVOH1A Servo I/O Module
Technical Specifications:
- It operates as a servo interface module, playing a critical role in interfacing between the servo valve and the turbine control system.
- Voltage and current specifications are tailored to ensure compatibility with various servo valves used in turbine applications.
- The module supports precise signal conversion and transmission essential for accurate control of hydraulic actuators associated with fuel valves or other turbine mechanisms.
NI PXI-7340 Motion Controller — Complete Technical Profile
Technical Specifications:
- Interface: It is designed to fit into a PXI chassis and offers connectivity for up to four axes of motion.
- Communication: Supports communication with NI-Motion software for easy configuration and control.
- Performance: Provides high-performance trajectory generation, which allows for smooth and accurate motion profiles.
- Resolution: High-resolution encoder feedback for precise position control.
- Connectivity: Includes multiple I/O lines for limit switches, home sensors, and other motion control peripherals.
MOOG D136-002-005 Multi-Axis Motion Controller
This servo valve typically features high resolution and low hysteresis, which are critical for accurate control. It is an electro-hydraulic servo valve that converts an electric input signal into a proportional hydraulic output. The exact technical specifications such as flow rate, pressure drop, response time, and power requirements would be listed in the product's datasheet.
EATON XV-440-10TVB-1-50 Industrial HMI-PLC Touch Panel
YOKOGAWA CP451-51 Multifunction Processor Module
Procurement Guidance
- Compatibility Notes
- Valid for CENTUM CS3000/VPS and AFV300/AFV400 systems; replaces legacy CP451-11 (#ref_11).
- Suffix
-51denotes standard non-explosion-proof variant; confirm ISA G3 compliance for corrosive environments (#ref_11).
- Critical Accessories
- Backplane Adapter (e.g., Yokogawa SDCS-PIN-24) for DCS rack integration (#ref_5).
- Battery Backup Module (IC698ACC701) for RAM retention during power loss (#ref_8).
- Avoid Mismatches
- Standalone HART isolators → Use Yokogawa CP451-HART.
- Low-power I/O modules → Refer to Yokogawa AFL111.
- Authenticity Verification
- Holographic seals on factory-sealed units; 12-month warranty (#ref_3).
- Cross-check part number 3BHE030579R0003 for industrial-grade variants (#ref_14).
KEBA FB201 — Comprehensive Data Sheet
Procurement Guidance
- Compatibility Notes
- Verify suffix codes (e.g.,
FB201/xxx) for I/O capacity and environmental ratings . - Requires KEBA RobotStudio or ECL-3 software for configuration .
- Verify suffix codes (e.g.,
- Critical Accessories
- Backplane Adapter (e.g., SDCS-PIN-24) for PLC integration .
- IP65 Housing for harsh environments (e.g., oil rigs, substations) .
- Avoid Mismatches
- Servo drives → Refer to KEBA KeDrive.
- HMIs → Use KEBA ETT Series.
UNIOP ETT-VGA-0045 Industrial HMI Touch Panel
Procurement Guidance
- Compatibility Notes
- Confirm suffix ETT-VGA-0045/xxx for size/protection variants (e.g.,
/IP65or/7INCH) . - For converter mode, verify HDMI audio support in specifications .
- Confirm suffix ETT-VGA-0045/xxx for size/protection variants (e.g.,
- Critical Accessories
- Backplane Adapter (e.g., UNIOP SDCS-PIN-24) for PLC integration .
- IP65 Protective Housing for outdoor HMI installations .
- Avoid Mismatches
- Standalone VGA converters → Use UNIOP ETT-CVT-1080P.
- Non-touch HMIs → Refer to UNIOP ETT-MON-001.
ABB LDGRB-01 3BSE013177R1 Industrial Signal-Conditioning & Remote I/O Module
GE VME7740-841 High-Performance VMEbus Single-Board Computer
Procurement Guidance
- Compatibility Notes
- Valid for VMEbus Rev. C.1 systems; firmware suffixes denote processor variants (e.g.,
-841= Pentium III). - Backward-compatible with legacy GE VersaPAC/VME systems .
- Valid for VMEbus Rev. C.1 systems; firmware suffixes denote processor variants (e.g.,
- Critical Accessories
- IC698ACC701 Lithium Battery: Mandatory for RAM backup .
- Resolver/Encoder Modules (e.g., X6/X12 interfaces) for closed-loop control .
- Avoid Mismatches
- High-channel I/O claims → Use GE VMIVME-5565 series.
- Core i7 processors → Refer to GE IC698CPE030.
- Authenticity Verification
- Holographic seals on factory-sealed units; 12-month warranty .
- Cross-check part number 3BHE030579R0003 for industrial-grade variants .
GE IC698CPE040-FJ Central Processing Unit Designed for RX7i PACSystems
Procurement Guidance
- Compatibility Notes
- Valid for RX7i/RX3i PACSystems; firmware suffixes (e.g.,
-FJ) denote specific variants . - Backward-compatible with legacy GE PLCs (e.g., Series 90-70) .
- Valid for RX7i/RX3i PACSystems; firmware suffixes (e.g.,
- Critical Accessories
- IC698ACC701 Lithium Battery: Mandatory for RAM backup .
- VME I/O Modules: e.g., DS200 series for signal distribution .
- Avoid Mismatched Claims
- "512 MB RAM" → Refers to GE IC698CPE030 model .
- "3AC 400V Input" → Applies to power modules, not CPU logic .
- Warranty & Authenticity
- 12-month warranty for factory-sealed units; verify holographic seals .
- Cross-check part number 3BHE030579R0003 for industrial-grade variants .
