GE DS200TCEAG1BNE Emergency Overspeed Protection Board
Technical Specifications
- Model: DS200TCEAG1BNE
- Brand: GE
- Manufacturer: GE Boards & Turbine Control
- Series: Mark V DS200
- Microprocessor: High-performance microprocessor for rapid response to speed changes
- PROM Modules: Multiple PROM modules for storing firmware and operational instructions
- Measurement Range: 0-100%
- Measurement Accuracy: ±0.5%
GE DS200TCDAH1B Control Module
Technical Specifications
- Processor: Integrated with advanced microprocessors for high-speed data processing and real-time control.
- Memory: Equipped with sufficient RAM to handle complex control algorithms and data storage requirements.
- Communication Interfaces: Supports multiple communication protocols, including Ethernet, RS-232/485, and other industrial fieldbus standards for seamless integration with other equipment.
- I/O Points: Provides a scalable number of input/output points to accommodate various control needs.
- Operating Temperature: Designed to operate reliably in a wide temperature range, typically from -20°C to +70°C.
GE DS200TCCAG1B Universal Control Interface Board
GE DS200SDCCG1AFD Drive Control Circuit Board
Technical Specifications
- Microprocessors: Three microprocessors (one for drive control, one for high-speed I/O and digital/analog I/O, and one for motor control processing)
- Memory: RAM for data storage and processing
- I/O Points: Up to 256 expandable I/O points
- Communication Interfaces: Ethernet, RS-232/485
- Storage Capacity: 512 KB
- Power Supply: 24 V DC
- Operating Temperature: -20°C to +60°C
- Storage Temperature: -40°C to +85°C
- Protection Rating: IP20
- Scan Cycle: 0.25 milliseconds
GE DS200ITXDG1ABA Dynamic Braking Buffer Board
Technical Specifications
Board Type: Dynamic braking buffer board
Input Voltage: 375 HP for constant torque applications (575 VAC), 300 HP for variable torque applications (380 VAC)
Connectors: Four-pin connector for interface with the IMCP (Interface Module Control Panel)
IGBT Compatibility: Designed to meet the switching frequency requirements of dynamic braking IGBTs
Output Regulation: Adjusts IGBT gate driver outputs to match the electrical characteristics of AT frame drivers
GE DS200DDTBG1A LCI Auxiliary I/O Terminal Board
Technical Specifications
- Input Voltage: 24 V DC
- Outputs: Four buffered analog outputs (±10 V range with 200 Ω series resistors)
- LED Indicators: 17 LEDs (1 for board status, 16 driven by software/hardware for diagnostic feedback)
- Jumpers: 12 jumpers for reconfiguring LEM/CT input channels to 4-20 mA current loop signals
- Test Points: 33 test points for signal measurement and debugging
- Connectivity: Screw-type terminal blocks for secure wiring connections
GE DS200DCFBG1BLC DC Feedback Power Supply Board
Technical Specifications
- Input Voltage: 38–115 VAC, 47–63 Hz (supports dual redundant inputs for enhanced reliability).
- Output Voltages:
- +5 V DC (4 A)
- ±15 V DC (0.8 A each)
- ±24 V DC (3 A/1 A)
- VCO Output: 0–500 kHz (nominal 250 kHz), isolated at 2.5 kV logic-to-power and 500 V channel-to-chassis.
- Feedback Input: Electromotive and field shunt resistors (50 mV–250 mV range).
GE DS200DCFBG1BJB Drive Control Power Supply Board
Technical Specifications
- Input Voltage Range: Compatible with multiple industrial power sources, typically ranging from 38 to 115 VAC (depending on system requirements).
- Output DC Voltage: Adjustable to meet the specific needs of connected drivers or exciters.
- Fan Power Supply: 115V AC (independent circuit to ensure reliable cooling).
- Protection Features:
- Overcurrent protection to prevent equipment damage.
- Overvoltage/undervoltage protection to ensure system stability.
- Feedback signal isolation to absorb millivolt-level interference and avoid unintended motor starts.
GE DS200DCFBG1BGB DC Feedback Power Supply Board
Technical Specifications
- Input Voltage Range: Compatible with multiple industrial power sources, typically ranging from 38 to 115 VAC (depending on system requirements).
- Output DC Voltage: Adjustable to meet the specific needs of connected drivers or exciters.
- Fan Power Supply: 115V AC (independent circuit to ensure reliable cooling).
- Efficiency: High conversion efficiency to minimize energy loss.
- Protection Features:
- Overcurrent protection to prevent equipment damage.
- Overvoltage/undervoltage protection to ensure system stability.
- Feedback signal isolation to absorb millivolt-level interference and avoid unintended motor starts.
GE DS200DCFBG1B DC Feedback Power Supply Board
Technical Specifications
- Input Voltage Range: Compatible with various industrial power sources (specific range depends on system requirements).
- Output DC Voltage: Adjustable (customizable based on drive requirements).
- Fan Power Supply: 115V AC (independent circuit for reliable cooling).
- Protection Features:
- Overcurrent protection: Automatically cuts off abnormal currents to prevent damage.
- Overvoltage/undervoltage protection: Monitors voltage fluctuations to ensure system stability.
- Feedback signal isolation: Absorbs millivolt-level interference to prevent unintended motor starts.
GE DS200CPCAG1ABB Contactor Guide Plate
Technical Specifications
Connectors:
One 12-pin connector
Two 2-pin connectors
Terminal Blocks: Four terminal blocks, supporting up to twelve signal wire connections.
Power Relay: Integrated 24VDC 15A socket power relay for reliable power distribution.
Electrical Ratings:
Rated Current: 16A
Rated Voltage: AC 240V
GE DS200CDBAG1ABA Mark V Turbine Control System Contactor Driver Board
Technical Specifications
- Function: Contactor driver for Mark V turbine control systems.
- Components: Includes a jumper (JP1) for factory testing, an electrometer for adjusting the current applied to contactor coils, and test points for board operation verification.
- Connectors: Connector 1TB consists of four parts (1TBA, 1TBB, 1TBC, 1TBD) for secure electrical connections.
- Protection: Features a 4 amp, 125 V, 2AG slow-blow fuse for overcurrent protection.
- Coating: The PCB is coated with a protective layer to shield against daily wear and tear and provide insulation.
