Shop

Technical Specifications

• Processor Architecture: Triple modular redundant (TMR) with three independent 32-bit processors executing in parallel.
• Memory: Standard main memory supporting complex logic programs.
• Scan Cycle: High-speed scanning with typical values as low as milliseconds.
• Communication Interfaces: Supports TriBus (TMR bus), ControlNet, EtherNet/IP, Profinet, and Modbus protocols.
• Safety Certifications: IEC 61508 SIL 3, TÜV-certified for safety-critical applications.
• Operating Temperature: 0 °C to 60 °C (standard industrial range).
• Power Supply: 20 V DC to 32 V DC, with redundant power options available.
• Dimensions: Designed for insertion into the leftmost slot of the main system rack.
• Weight: Approximately 2.94 kg (shipping weight: 4 kg).

Technical Specifications

1. Mechanical Specifications
   • Material: Impact‑resistant industrial black plastic (high‑grade polymer)
   • Form Factor: Tall blanking cover for I/O slots without terminal adapters
   • Dimensions: 30.5 mm (height) × 124 mm (width) × 126 mm (depth) (1.20 in × 4.88 in × 4.96 in)
   • Weight: 0.1 kg (0.22 lb)
   • Mounting: Tool‑free snap‑fit installation into ICS Triplex Trusted/AADvance chassis I/O slots
   • Protection Rating: Maintains chassis IP20 rating against dust and finger contact
   • Color: Black (standard industrial chassis color for visual consistency)
2. Environmental Specifications
   • Operating Temperature: -20°C to +70°C (-4°F to 158°F)
   • Storage Temperature: -40°C to +85°C (-40°F to 185°F)
   • Relative Humidity: 10%–95% (non‑condensing)
   • Vibration Resistance: Compliant with IEC 60068‑2‑6 (2 g, 10–150 Hz)
   • Shock Resistance: Compliant with IEC 60068‑2‑27 (15 g, 11 ms duration)
   • Chemical Resistance: Resistant to oils, greases, and common industrial solvents
   • Ingress Protection: Seals I/O slots to preserve chassis IP20 rating

Technical Specifications

1. Mechanical Specifications
   • Cable Length: 2 meters (6.56 feet)
   • Connector Type: DB37 male-to-male with locking screws
   • Shielding: Multi-layer foil and tinned copper braid (90% coverage)
   • Jacket Material: Oil-resistant, flame-retardant PVC (UL 94 V-0 rated)
   • Strain Relief: Integrated molded strain relief at both connectors
   • Weight: 0.45 kg (0.99 lb)
   • Color: Black (matches AADvance chassis and backplanes)
   • Form Factor: Flexible, industrial-grade cable for rack-to-rack connections
2. Electrical Specifications
   • Signal Type: Power (18–32 VDC) and high-speed AADvance backplane bus signals
   • Maximum Current Rating: 9.6 A (supports T9300 backplane total current)
   • Impedance: 100 Ω (differential signals) for signal integrity
   • Voltage Rating: 60 VDC (safe for system power distribution)
   • Signal Propagation Delay: <1 µs/m (ensures real-time control signal transmission)
   • Crosstalk: < -60 dB (eliminates signal interference between conductors)

Technical Specifications

• Redundancy Architecture: Triple modular redundant (TMR) design with three independent CPUs, power supplies, and I/O modules for fault tolerance.
• Processor: 64-bit CPU with a clock speed of ≥1 GHz, enabling high-speed data processing and complex control algorithm execution.
• Memory: RAM ≥2 GB, Flash ≥512 MB, supporting large-scale program storage and rapid data access.
• Input/Output Channels:
  • Digital Input: Up to 32 channels (expandable to 128 channels), supporting 0-32 V DC signals.
  • Digital Output: Supports relay outputs (max load 2 A/30 V DC).
• Communication Interfaces: Ethernet (10/100 Mbps), RS-485, Profibus-DP, Modbus TCP/RTU for seamless integration with other systems.
• Switching Time: ≤1 millisecond (from fault detection to main-backup switchover).
• Safety Certifications: TÜV SIL 3, IEC 61508, and IEC 61511 compliant, ensuring compliance with international safety standards.

Technical Specifications Mechanical Specifications Form Factor: AADvance standard module (compatible with T9300 3‑slot backplanes) Dimensions: 112 mm (width) × 70 mm (depth) × 123 mm (height) (4.41 in × 2.76 in × 4.84 in) Weight: 0.29 kg (0.64 lb) Mounting: Plug‑in to T9300 backplane; tool‑free installation Protection Rating: IP20 (dust and finger contact protection) Housing Material: Powder‑coated metal alloy with flame‑retardant polymer insulators Color: Black (matches AADvance controller chassis for uniform appearance)

Technical Specifications

1. Mechanical Specifications
   • Form Factor: AADvance standard termination assembly (compatible with T9300 backplanes)
   • Dimensions: 112 mm (width) × 70 mm (depth) × 123 mm (height) (4.41 in × 2.76 in × 4.84 in)
   • Weight: 1.0 kg (2.2 lb)
   • Mounting: Plug‑in to T9300 backplanes; tool‑free installation
   • Protection Rating: IP20 (dust and finger contact protection)
   • Housing Material: Powder‑coated metal alloy with flame‑retardant polymer insulators
   • Color: Black (matches AADvance controller chassis for uniform appearance)
   • Connector Type: Locking terminal blocks (screw‑type, 2.5 mm² wire capacity)