TRICONEX MP3001 Processor Module

• Output and Signal Parameters
  • It has 4 common - return, DC - coupled output channels, with a 12 - bit resolution and an output accuracy of less than 0.25% of the full - scale range within the 4 - 20mA controlled current range.
  • The output current can reach an over - range of 0 - 22mA and also has a 0mA output capability, with a step function response time of less than 2ms.
  • The typical switch time when a channel fails is 1ms, and the maximum switch time does not exceed 3ms.
• Power and Loop Parameters
  • The nominal external loop power supply is 24V DC, and the maximum allowable voltage is 32V DC, with reverse voltage protection.
  • For a 300Ω load, the loop power supply needs to be over 16V DC with a minimum current of 1A; for an 800Ω load, the loop power supply must be over 28V DC with a minimum current of 1A.
  • It has continuous over - range protection against 36V DC and 0V DC, which effectively protects the internal circuitry from damage due to abnormal voltage.

• Input and Signal Parameters
  • It is equipped with 8 independent non-common-ground input channels. The typical input voltage is 24 VDC, and the typical input current per channel is 10 mA.
  • The input signal frequency range is 1 Hz to 100 kHz, and the precision reaches ±0.01% when measuring frequencies between 1000 Hz and 20000 Hz.
  • It has a 16-bit resolution and a pulse counting resolution of 1 microsecond, and the pulse width resolution ranges from 100 microseconds to 10 milliseconds, which can capture pulse signal changes accurately.
• Power and Physical Parameters
  • It relies on 24 VDC power supply to operate stably, matching the power supply configuration of most industrial control systems.
  • There are differences in dimension and weight data from different sources. One source states its dimensions as 80mm x 110mm x 40mm and weight of approximately 200 grams, while another source records dimensions as 120mm x 80mm x 30mm and weight of about 3.3 kilograms, which may be due to whether the measurement includes accessories.

• Electrical Parameters
  • It provides 32 commoned output channels with a nominal voltage of 24 VDC and a voltage adaptation range of 16 - 32 VDC, and can withstand a maximum voltage of 36 VDC.
  • Each output point has a maximum current of 1.7 A, a surge current of 7 A within 10 milliseconds, a minimum required load current of 10 mA, and a maximum load leakage current of 4 mA.
  • The typical voltage drop is less than 2.8 VDC at 1.7 A, the power module load is less than 13 watts, and the point isolation voltage reaches 1500 VDC to avoid electrical interference between circuits.
• Physical Parameters
  • The module weighs 0.8 kg and has dimensions of 16cm × 16cm × 12cm, featuring a compact and lightweight design that facilitates installation in various industrial control cabinets.
  • It adopts an IP20-rated enclosure and is equipped with dedicated LED indicators for each output point to show on/off states, as well as module status indicators for pass, fault, load, and active conditions.

Technical Specifications:

• Type: Typically serves as an interface or communication module within the Tricon system.
• Communication Protocols: Supports industry-standard protocols to ensure compatibility with various control systems and devices.
• Power Supply: Operates within specified voltage ranges suitable for industrial environments.
• Environmental Endurance: Designed to withstand harsh conditions including wide temperature ranges, humidity, and exposure to dust.
• Certifications: Certified for use in Safety Instrumented Systems (SIS) up to Safety Integrity Level 3 (SIL 3), ensuring compliance with stringent safety standards.