TRICONEX DO9662-810 Digital Output Module

• Processor and Memory Parameters
  • It is equipped with a 32-bit Motorola MPC860 processor running at a clock speed of 50 MHz, which supports real-time operating systems and efficiently executes complex control logic.
  • It is configured with 16 MB of non - battery backed DRAM, 32 KB of battery backed SRAM, and 6 MB of flash PROM, which can store a large number of control programs and real-time operation data stably.
• Communication Parameters
  • It uses the TriBus communication bus with a data transmission rate of 25 Mbps. The bus is equipped with 32-bit CRC protection and 32-bit DMA, and the communication part is fully isolated to ensure secure and stable data transmission.
  • It supports multiple communication protocols such as Modbus, Modbus TCP/IP, and Ethernet/IP, and is also compatible with communication interfaces like RS - 232/422/485 to achieve seamless connection with various industrial devices and systems.

• Input and Signal Parameters
  • It is equipped with 8 independent non-common-ground input channels. The typical input voltage is 24 VDC, and the typical input current per channel is 10 mA.
  • The input signal frequency range is 1 Hz to 100 kHz, and the precision reaches ±0.01% when measuring frequencies between 1000 Hz and 20000 Hz.
  • It has a 16-bit resolution and a pulse counting resolution of 1 microsecond, and the pulse width resolution ranges from 100 microseconds to 10 milliseconds, which can capture pulse signal changes accurately.
• Power and Physical Parameters
  • It relies on 24 VDC power supply to operate stably, matching the power supply configuration of most industrial control systems.
  • There are differences in dimension and weight data from different sources. One source states its dimensions as 80mm x 110mm x 40mm and weight of approximately 200 grams, while another source records dimensions as 120mm x 80mm x 30mm and weight of about 3.3 kilograms, which may be due to whether the measurement includes accessories.

• Electrical Parameters
  • It provides 32 commoned output channels with a nominal voltage of 24 VDC and a voltage adaptation range of 16 - 32 VDC, and can withstand a maximum voltage of 36 VDC.
  • Each output point has a maximum current of 1.7 A, a surge current of 7 A within 10 milliseconds, a minimum required load current of 10 mA, and a maximum load leakage current of 4 mA.
  • The typical voltage drop is less than 2.8 VDC at 1.7 A, the power module load is less than 13 watts, and the point isolation voltage reaches 1500 VDC to avoid electrical interference between circuits.
• Physical Parameters
  • The module weighs 0.8 kg and has dimensions of 16cm × 16cm × 12cm, featuring a compact and lightweight design that facilitates installation in various industrial control cabinets.
  • It adopts an IP20-rated enclosure and is equipped with dedicated LED indicators for each output point to show on/off states, as well as module status indicators for pass, fault, load, and active conditions.

Technical Specifications:

• Type: Typically serves as an interface or communication module within the Tricon system.
• Communication Protocols: Supports industry-standard protocols to ensure compatibility with various control systems and devices.
• Power Supply: Operates within specified voltage ranges suitable for industrial environments.
• Environmental Endurance: Designed to withstand harsh conditions including wide temperature ranges, humidity, and exposure to dust.
• Certifications: Certified for use in Safety Instrumented Systems (SIS) up to Safety Integrity Level 3 (SIL 3), ensuring compliance with stringent safety standards.