Triconex 9853-610 Analog Input Terminal Block - Image 1
Triconex 9853-610 Analog Input Terminal Block - Image 2
Click to enlarge
Triconex 9853-610 Analog Input Terminal Block
Triconex 9853-610 Analog Input Terminal Block - Image 2
Triconex 9750-210 32-Point Current Input Terminal Board
Triconex 9750-210 32-Point Current Input Terminal Board
Back to products
ABB 5SHY4045L0006 3BHB030310R0001 IGCT module
ABB 5SHY4045L0006 3BHB030310R0001 IGCT module

Triconex 9853-610 Analog Input Terminal Block

Technical Specifications

  • Electrical Parameters
    • It supports multiple analog input ranges, including 0 – 10V, -10V to 10V, 4 – 20mA, and 0 – 20mA, covering the signal requirements of most industrial field sensors.
    • It has a measurement accuracy of ±0.1% and a resolution of 12 bits, and the signal update rate reaches 250ms, which can ensure the accuracy and real-time performance of data collection.
    • It uses a 24VDC power supply, with a power consumption of only 5W, which will not add excessive power burden to the overall safety system.
  • Physical Parameters
    • Its overall dimensions are 110mm × 45mm × 22mm, and its weight is 150g. The compact and lightweight design allows it to be flexibly installed in control cabinets with limited space.
    • It is equipped with screw-type terminals, which can provide firm wiring connections and avoid poor contact caused by vibration in industrial environments.
Category:
Description
    • Environmental Parameters
      • The operating temperature range is -40°C to 85°C, which can adapt to extreme temperature conditions in both cold and high-temperature industrial sites.
      • It has an IP65 protection level, which can effectively prevent the intrusion of dust and water splashes, and maintain stable performance in humid and dusty industrial workshops.
  • Functional Features
    • Multi-type Signal Adaptation and High-precision Acquisition
      • It supports four common analog input signal types, enabling it to connect with different types of field sensors such as pressure sensors, temperature sensors, and flow sensors without additional adapter components.
      • The combination of ±0.1% measurement accuracy and 12-bit resolution ensures that the converted digital signals can accurately reflect the actual status of field equipment and processes, laying a foundation for precise control of the system.
    • Anti-interference and High-reliability Design
      • Its input channels adopt a mutual isolation design, which can prevent signal crosstalk between different channels and avoid signal distortion caused by mutual interference.
      • It is made of high-grade materials and adopts advanced manufacturing processes. Its mean time between failures exceeds 100 years, which can ensure long-term uninterrupted operation in industrial environments and reduce the frequency of equipment failures.
    • Easy Configuration and Maintenance
      • It supports multiple communication protocols such as Modbus and Profibus, which facilitates quick configuration and parameter adjustment when connecting with different control systems.
      • The modular design simplifies the installation process. During routine maintenance or failure repair, the module can be quickly disassembled and replaced, minimizing production downtime caused by equipment maintenance.
  • Application Scenarios
    • Oil and Chemical Industry
      • In onshore refineries, it connects with flow and pressure sensors in distillation and catalytic cracking units. It collects analog signals of process parameters in real time and transmits them to the control system to ensure the stability of the refining process and prevent safety accidents such as overpressure.
      • In offshore oil drilling platforms, it is used with temperature and pressure sensors in oil transmission pipelines. It resists salt spray corrosion and stably collects pipeline operation parameters to ensure the safe transportation of crude oil.
    • Power Industry
      • In thermal power plants, it connects to the sensors of generators and transformers to collect analog signals such as operating temperature and output current of the equipment. The control system monitors abnormal parameters in time to avoid equipment damage due to overheating or overcurrent.
      • In nuclear power facilities, it is applied to the analog signal collection of reactor cooling system sensors. It provides reliable data support for the stable operation of the cooling system and ensures the safety of the nuclear reactor.
    • Manufacturing Industry
      • In automobile manufacturing plants, it is used in automated assembly lines to connect with position and speed sensors of robotic arms. It collects analog signals during the operation of robotic arms to ensure the accuracy of assembly actions and improve the qualification rate of finished products.
      • In non-ferrous metal smelting workshops, it connects with temperature sensors in smelting furnaces. It transmits real-time temperature signals to the control system, which adjusts the heating power in time to maintain the stability of smelting temperature.
    • Transportation Industry
      • In rail transit systems, it connects with sensors that monitor the operating status of trains and traffic lights. It collects analog signals such as train speed and signal light current and transmits them to the traffic control center to improve the operation efficiency and safety of the rail transit system.
      • In intelligent transportation systems on highways, it is matched with vehicle flow detection sensors. It converts the collected analog signals of vehicle flow into digital signals to provide data support for traffic signal control and traffic flow scheduling.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Triconex 9853-610 Analog Input Terminal Block”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Triconex 2201 Digital Input/Output Safety Module

Technical Specifications
  • Power and Physical Parameters
    • It uses a 24V DC power supply, which matches the power configuration of standard industrial control systems.
    • The operating temperature range is -40°C to +70°C, and it can maintain stable operation in extremely cold or high-temperature industrial environments.
    • Its dimensions are 15.5 centimeters × 10.5 centimeters × 2.5 centimeters, and the compact size allows for flexible installation in various control cabinets.
    • It adopts DIN rail mounting, which conforms to common industrial installation standards and simplifies the on-site installation process.
  • I/O and Communication Parameters
    • It is equipped with 16 digital input channels and 16 digital output channels, and can support up to 2048 I/O points when integrated into the system to meet the expansion needs of large-scale safety systems.
    • The maximum output current reaches 2A, which can directly drive most industrial on-site digital output devices without additional power amplification components.
    • It supports multiple communication protocols including Modbus, Ethernet/IP and OPC, and is also equipped with an RS485 communication interface to ensure smooth connection with existing industrial networks.
Read more
Quick view

Triconex 3008N Tricon V10 Main Processor Module

Technical Specifications
  • Processor and Memory Parameters
    • It is equipped with a 32-bit Motorola MPC860 processor running at a clock speed of 50 MHz, which supports real-time operating systems and efficiently executes complex control logic.
    • It is configured with 16 MB of non - battery backed DRAM, 32 KB of battery backed SRAM, and 6 MB of flash PROM, which can store a large number of control programs and real-time operation data stably.
  • Communication Parameters
    • It uses the TriBus communication bus with a data transmission rate of 25 Mbps. The bus is equipped with 32-bit CRC protection and 32-bit DMA, and the communication part is fully isolated to ensure secure and stable data transmission.
    • It supports multiple communication protocols such as Modbus, Modbus TCP/IP, and Ethernet/IP, and is also compatible with communication interfaces like RS - 232/422/485 to achieve seamless connection with various industrial devices and systems.
Read more
Quick view

Triconex 3351 Analog Input (AI) Module

Technical Specifications
  • Input and Signal Parameters
    • The analog input version has 32 shared points, with a nominal input current of 4 - 20mA DC and an operating current range of 2 - 22mA DC. It has a 16-bit resolution and an accuracy of ±0.01% within the 1000 - 20000Hz frequency range.
    • The pulse input version has 8 high-frequency input points, a pulse count measurement resolution of 1 microsecond, and an input diagnostic fault range of 0.5% of the full scale. The input change sampling cycle is the longer one between one scan and 210 milliseconds.
    • The module has an input bandwidth of 16Hz, an absolute maximum field voltage of 33V DC, and an absolute maximum reverse field voltage of -0.6V DC.
  • Power and Electrical Parameters
    • The nominal power supply voltage is 24V DC. The minimum isolation between functional and protective earth is 500V DC, and the minimum isolation between functional and functional earth is 800V DC.
    • The module has a source impedance of 180Ω, an input impedance of 250Ω when paired with a baseplate, and a 100Ω I-to-V resistor with a tolerance of ±0.01%.
Read more
Quick view

Triconex 3504E High-Density Triple Modular Redundancy Digital Input Module

  • Technical Specifications
    • Input and Signal Parameters
      • It is configured with 64 commoned, DC-coupled input channels. It offers software-selectable voltage options of 24 VDC or 48 VDC, adapting to different industrial field requirements.
      • The voltage range for 24 VDC is 15 - 30 VDC with a maximum voltage of 36 VDC; for 48 VDC, the range is 20 - 72 VDC. The turn-on voltage threshold exceeds 15 VDC for 24 VDC and 32 VDC for 48 VDC, while the turn-off threshold is below 6 VDC for 24 VDC and 11 VDC for 48 VDC.
      • The nominal turn-on current is 2 - 3 mA. The input delay is less than 2 ms for 24 VDC and less than 10 ms for 48 VDC, and the minimum point isolation voltage reaches 1500 VDC.
    • Physical and Weight Parameters
      • There are conflicting data on its physical dimensions from different sources, but it is designed for integration into standard Triconex system racks. One source lists its weight as 5000 grams, while another cites approximately 0.5 kilograms, and these discrepancies may stem from differences in whether accessories are included in the weighing.
    • Environmental Parameters
      • It maintains stable operation within an operating temperature range of -40°C to 70°C, which allows it to adapt to extreme temperature conditions in various industrial sites.
      • It has a protection level of IP65, enabling it to resist the impact of dust and water in harsh industrial environments and ensuring long-term reliable operation.
Read more
Quick view

Triconex 3625A 32-Point Triple Modular Redundancy Digital Output Module

Technical Specifications
  • Electrical Parameters
    • It is equipped with 32 output channels, the nominal output voltage is 24 VDC, and the adaptive voltage range is 16 - 32 VDC, with a maximum withstand voltage of 36 VDC.
    • Each output channel has a maximum output current of 1.7 A, a surge current of 7 A that can last for 10 milliseconds, a minimum load current of 10 mA, and a maximum load leakage current of 4 mA.
    • The isolation voltage between channels reaches 1500 VDC to effectively prevent electrical interference between different channels, and the overall power consumption of the module is less than 13 watts.
  • Physical Parameters
    • The module has dimensions of 160 x 160 x 125 mm and a weight of approximately 2.5 kg, which is suitable for installation in the slot of the Triconex system rack.
    • It adopts a corrosion-resistant metal shell, and is equipped with LED indicators for each output channel and overall status, which can directly display the working state of the module and each channel.
Read more
Quick view

Triconex 3625C1 32-Point Triple Modular Redundancy Digital Output Module

Technical Specifications
  • Electrical Parameters
    • It is configured with 32 commoned digital output channels, the nominal output voltage is 24 VDC, and the adaptive voltage range is 16 - 32 VDC, with a maximum withstand voltage of 36 VDC.
    • Each output channel can provide a maximum current of 1.7 A, the overall power consumption of the module is less than 13 watts, and some data shows that its output power can reach 15 watts.
    • It adopts a dual-power design, which further improves the stability of power supply and avoids system operation interruption caused by single power failure.
  • Processing and Memory Parameters
    • It is equipped with a dual-core PowerPC processor with a clock frequency of 800 MHz, which can efficiently support complex control algorithms and logic operations.
    • The module provides a memory range of 1 GB - 8 GB, which can store a large number of control logic programs and real-time operating data to meet the needs of complex industrial control scenarios.
Read more
Quick view

Triconex 4355X

Technical Specifications
  • Architecture: Triple Modular Redundancy (TMR) for fault tolerance.
  • Processor: High-performance CPU with sufficient memory for complex control tasks.
  • Communication Protocols:
    • Modbus (RTU/TCP) for integration with PLCs and SCADA systems.
    • Profibus DP for real-time control of sensors and actuators in factory automation.
    • Ethernet for high-speed data exchange and remote monitoring.
  • Input/Output (I/O):
    • Digital Inputs/Outputs: 16 isolated digital inputs and 8 relay outputs (potential-free contacts).
    • Analog Support: Optional integration with analog modules for temperature, pressure, and flow monitoring.
Read more
Quick view

TRICONEX CM3201 – Communication Module for Safety-Critical Systems

Technical Specifications:

  • Type: Communication Module
  • System Compatibility: Designed to work within the Tricon system architecture, supporting seamless integration with other Tricon components.
  • Communication Protocols: Supports various industry-standard communication protocols, facilitating connectivity with Distributed Control Systems (DCS), Supervisory Control and Data Acquisition (SCADA) systems, and other plant networks.
Read more
Quick view