Triconex 8120E - Image 1
Click to enlarge
Triconex 8111 Expansion Chassis
Triconex 8111 Expansion Chassis
Back to products
Triconex 8305A
Triconex 8305A

Triconex 8120E

Technical Specifications:

  • Operating Temperature: -20°C to +60°C (-4°F to +140°F)
  • Storage Temperature (Non-operational): -20°C to +65°C (-4°F to +158°F)
  • Relative Humidity: Up to 95% (non-condensing)
  • Vibration Resistance: 0.04 G²/Hz, 1.04 Grms, 10 to 500 Hz
  • Input/Output Support: Compatible with various modules, including digital input modules and external terminal modules, for receiving and transmitting analog and digital signals.
  • Communication Capabilities: Supports multiple communication protocols, including MODBUS slave/master, Tristation, TSAA (including DDE, OPC), and point-to-point communication protocols.
  • Certifications: Meets TUV AK6, NFPA72, FM, CSA, and other safety and reliability standards.
Category:
Description

Functional Characteristics:

  • High Reliability: The TMR architecture ensures continuous operation even if one of the three control paths fails, enhancing system availability.
  • Fault Tolerance: Independent diagnostic circuits detect and isolate faults, preventing them from affecting the overall system.
  • Flexible Configuration: Supports a wide range of I/O modules, allowing for customization based on specific application requirements.
  • Easy Maintenance: Modules can be replaced online without shutting down the system, reducing downtime and maintenance costs.
  • Comprehensive Diagnostics: Provides detailed diagnostic information for monitoring system health and troubleshooting issues.

Application Scenarios:
The Triconex 8120E is widely used in industries where safety and reliability are critical, including:

  • Oil and Gas: Monitoring and controlling critical parameters in extraction, transportation, and refining processes to prevent accidents and ensure environmental compliance.
  • Chemical Industry: Safeguarding chemical production processes by enabling communication between safety instrumented systems and other process control systems.
  • Power Generation: Automating power plants, transmission lines, and substations for safe and efficient operation, including emergency shutdown systems.
  • Railway Transportation: Ensuring safe and reliable operation of railway signaling and control systems.
  • Boiler Management: Protecting boilers from various disturbances, ensuring safe start-up and shutdown sequences, and monitoring flame status.
  • Turbine Compressor Control: Providing high-reliability control and protection for turbine-driven compressor units, ensuring continuous operation and safety.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Triconex 8120E”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Triconex 3008 Triple Modular Redundancy Main Processor Module

Technical Specifications
  • Processor and Memory Parameters
    • It is equipped with a 32-bit TriCore VME processor that delivers powerful computing capabilities to support the rapid execution of complex safety control logic.
    • It has 16 MB of RAM for real-time data processing and 2 MB of Flash ROM for storing system programs and configuration data, ensuring stable data storage and quick access.
  • Communication and Backplane Parameters
    • It is configured with serial ports and Ethernet ports for data interaction with upper monitoring systems and external devices.
    • It uses the TriBus backplane with a communication rate of 25 Mbps, which guarantees efficient and stable data transmission between the module and matching I/O modules.
    • It supports connection with an RS-232 optical isolation interface, which enhances the module's anti-interference ability during communication.
Read more
Quick view

Triconex 3201 Communication Module

Technical Specifications
  • Communication Port Parameters
    • It is equipped with three configurable RS - 232/485 serial ports and two Ethernet ports. Some versions can be configured with four serial ports, with a total data transmission rate of 460.8 kilobits per second for all serial ports.
    • The two Ethernet ports include 802.3 copper Ethernet ports and fiber - optic Ethernet ports in different models, with the Ethernet transmission speed reaching 100Mbps.
    • The first serial port can support Modbus or Trimble GPS interface, and the fourth serial port can be configured as Modbus or Tristation interface.
  • Power and Electrical Parameters
    • The nominal input voltage is 24V DC, and the working voltage range is 19.2V DC to 30V DC, which can tolerate 5% AC ripple.
    • The maximum power interruption time allowed from the nominal voltage is 1 millisecond, the minimum repetition rate of power interruption is 1 second, and the maximum logic power consumption of the module is 8 watts.
Read more
Quick view

Triconex 3201 Communication Module

Technical Specifications:
  • System Architecture: The 3201 model is part of a triply redundant architecture, offering fault tolerance and high availability. This triple modular redundancy (TMR) ensures continuous operation even in the event of hardware failures.
  • Processor Capabilities: Equipped with powerful processors capable of executing complex control logic and diagnostics simultaneously across three channels to ensure reliable operation.
  • Memory: Includes sufficient memory for storing application programs, historical data, and system parameters, supporting extensive configuration and logging capabilities.
  • Communication Interfaces: Supports various communication protocols including Modbus, OPC, and proprietary interfaces, enabling seamless integration with distributed control systems (DCS) and other plant networks.
Read more
Quick view

Triconex 3511 High-Precision Triple Redundant Pulse Input Module

Technical Specifications
  • Input and Signal Parameters
    • It is equipped with 8 independent non-common-ground input channels. The typical input voltage is 24 VDC, and the typical input current per channel is 10 mA.
    • The input signal frequency range is 1 Hz to 100 kHz, and the precision reaches ±0.01% when measuring frequencies between 1000 Hz and 20000 Hz.
    • It has a 16-bit resolution and a pulse counting resolution of 1 microsecond, and the pulse width resolution ranges from 100 microseconds to 10 milliseconds, which can capture pulse signal changes accurately.
  • Power and Physical Parameters
    • It relies on 24 VDC power supply to operate stably, matching the power supply configuration of most industrial control systems.
    • There are differences in dimension and weight data from different sources. One source states its dimensions as 80mm x 110mm x 40mm and weight of approximately 200 grams, while another source records dimensions as 120mm x 80mm x 30mm and weight of about 3.3 kilograms, which may be due to whether the measurement includes accessories.
Read more
Quick view

Triconex 3604E 24VDC 16-Point Triple Modular Redundancy Digital Output Module

  • Technical Specifications
    • Electrical and Signal Parameters
      • It is equipped with 16 non-commoned independent output channels, with a nominal output voltage of 24 VDC and a voltage adaptation range of 22 - 45 VDC.
      • Each channel can carry a current of 2A, and the signal response time is less than 1ms, enabling rapid execution of control commands.
      • It adopts optical isolation technology, with a point-to-point isolation voltage of 1500 VDC, which can effectively prevent electrical interference between channels and external circuits.
    • Physical and Weight Parameters
      • Its dimensions are 49cm × 45.3cm × 6.8cm, and it is designed for 19-inch rack mounting, which is consistent with standard industrial control cabinet installation specifications.
      • The weight of the module is 3.65 kg, and its solid structure ensures stability during long-term operation.
    • Environmental Parameters
      • The operating temperature range is -40°C to 85°C, which allows it to adapt to the extreme temperature fluctuations of various outdoor and indoor industrial sites.
      • It can work normally in an environment with a relative humidity of 0% - 95% (non-condensing), resisting the impact of humid air on internal components.
Read more
Quick view

Triconex 3625C1 32-Point Triple Modular Redundancy Digital Output Module

Technical Specifications
  • Electrical Parameters
    • It is configured with 32 commoned digital output channels, the nominal output voltage is 24 VDC, and the adaptive voltage range is 16 - 32 VDC, with a maximum withstand voltage of 36 VDC.
    • Each output channel can provide a maximum current of 1.7 A, the overall power consumption of the module is less than 13 watts, and some data shows that its output power can reach 15 watts.
    • It adopts a dual-power design, which further improves the stability of power supply and avoids system operation interruption caused by single power failure.
  • Processing and Memory Parameters
    • It is equipped with a dual-core PowerPC processor with a clock frequency of 800 MHz, which can efficiently support complex control algorithms and logic operations.
    • The module provides a memory range of 1 GB - 8 GB, which can store a large number of control logic programs and real-time operating data to meet the needs of complex industrial control scenarios.
Read more
Quick view

TRICONEX AI2351 7400210-010

  • Number of Channels: 8
  • Input Range: 4 mA to 20 mA
  • Accuracy: ±0.25%
  • Response Time: Less than 250 ms
  • Power Consumption: 24 VDC, 2.5 A
  • Operating Temperature: - 40°C to +70°C
  • Humidity: 0% to 95% non - condensing
  • Supported Input Signal Types: Voltage (±10V, 0 - 10V) and current (4 - 20mA) (additional information from another source)
Read more
Quick view

TRICONEX CM3201 – Communication Module for Safety-Critical Systems

Technical Specifications:

  • Type: Communication Module
  • System Compatibility: Designed to work within the Tricon system architecture, supporting seamless integration with other Tricon components.
  • Communication Protocols: Supports various industry-standard communication protocols, facilitating connectivity with Distributed Control Systems (DCS), Supervisory Control and Data Acquisition (SCADA) systems, and other plant networks.
Read more
Quick view