Triconex 3601E Opto-Isolated Triple Modular Redundancy Digital Output Module - Image 1
Click to enlarge
Triconex 3511 High-Precision Triple Redundant Pulse Input Module
Triconex 3511 High-Precision Triple Redundant Pulse Input Module
Back to products
Triconex 3604E 24VDC 16-Point Triple Modular Redundancy Digital Output Module
Triconex 3604E 24VDC 16-Point Triple Modular Redundancy Digital Output Module

Triconex 3601E Opto-Isolated Triple Modular Redundancy Digital Output Module

  • Technical Specifications
    • Electrical and Signal Parameters
      • It is equipped with 16 opto – isolated, non – commoned digital output channels. The nominal output voltage is 115 VAC, with a voltage range of 80 – 155 VAC and a frequency range of 47 – 63 Hz.
      • The relay rating of the module reaches 5 A at 250 VAC or 30 VDC, and the signal response time is no more than 2 ms, which can realize rapid execution of control commands.
    • Physical and Weight Parameters
      • The shell is made of aluminum alloy, with dimensions of 200mm × 150mm × 50mm and a weight of 2 kilograms, which is convenient for installation in standard industrial control cabinets.
    • Environmental Parameters
      • The operating temperature range is – 40 °C to 70 °C, and the storage temperature can reach – 40 °C to 85 °C. It can operate normally in an environment with a relative humidity of 0% – 95% (non – condensing).
      • It has an IP65 environmental protection rating, which can effectively prevent dust and water from entering the module and ensure stable operation in humid and dusty industrial environments.
Category:
Description
  • Functional Features
    • Triple Modular Redundancy Ensures Fault Tolerance
      • The triple modular redundancy architecture enables the module to have three independent signal processing paths. When a single path malfunctions, the other two paths can still maintain normal operation and output correct signals through a voting mechanism. This design completely eliminates the impact of single – point faults and greatly improves the reliability and fault tolerance of the module in safety – critical systems.
    • Comprehensive Fault Diagnosis and Isolation
      • The module is equipped with complete fault detection, isolation, and fault tolerance functions. It can continuously monitor its own circuit status and output channel connections during operation.
      • Once an open circuit, short circuit, or opto – isolation failure occurs, it can quickly isolate the faulty channel and send fault alerts to the controller. This allows maintenance personnel to quickly locate the fault point and carry out targeted repairs.
    • Strong Compatibility and Fast Response
      • It supports multiple communication protocols such as Modbus, Profibus DP, and Ethernet/IP, which can seamlessly connect with various industrial control networks and realize smooth data exchange with other equipment in the system.
      • With a response time of no more than 2 ms, it can quickly convert the controller’s instructions into actions of the executive components. This rapid response capability is essential for scenarios that require immediate response to dangerous conditions, such as emergency shutdowns.
  • Application Scenarios
    • Oil and Gas Industry
      • In offshore drilling platforms and onshore oilfields, it is integrated into emergency shutdown systems and fire and gas protection systems. When gas sensors or fire detectors detect leaks or fires, the module can quickly drive emergency shutdown valves and alarm devices to cut off the oil and gas transmission path and remind on – site personnel to evacuate, avoiding large – scale accidents.
      • In oil refineries, it is used in the safety control system of distillation towers and catalytic cracking units. It drives the on – off valves of pipelines according to the controller’s instructions. When the temperature and pressure of the equipment exceed the safety range, it can immediately cut off the feeding valve to prevent equipment damage caused by excessive load.
    • Chemical and Power Industry
      • In chemical plants producing flammable and explosive materials, it is applied to burner management systems and reactor interlock systems. It controls the ignition device and fuel supply valve of the burner. When the combustion is abnormal, it can quickly cut off the fuel supply; it can also drive the emergency discharge valve of the reactor when the reaction parameters are abnormal to avoid dangerous reactions such as explosions.
      • In thermal power plants, it is used in boiler safety protection systems and steam turbine control systems. It drives safety valves and pressure relief devices. When the boiler pressure is too high or the turbine operates abnormally, it can immediately open the pressure relief valve to ensure the safe operation of the boiler and turbine.
    • Pharmaceutical and Metallurgical Industry
      • In pharmaceutical production workshops that require strict process control, it is integrated into the production process safety control system. It drives the switching components of material feeding and discharge pipelines. When the temperature and pH value of the reaction kettle deviate from the set range, it can quickly cut off the material transmission to ensure the quality and safety of pharmaceutical products.
      • In metallurgical factories, it is used in blast furnace and converter safety control systems. It controls the on – off of air supply valves and material adding mechanisms. When the temperature and pressure of the blast furnace or converter are abnormal, it can stop the air supply and feeding in time to prevent equipment damage and production accidents.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Triconex 3601E Opto-Isolated Triple Modular Redundancy Digital Output Module”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Triconex 3009 Enhanced Main Processor (UMP) Module

Technical Specifications
  • Processor and Memory Parameters
    • It is equipped with an Intel Core i7 - 4790 or PowerPC 604e processor, with a main frequency of up to 1.3 GHz, which can efficiently support the operation of complex control algorithms and large - scale system data processing.
    • It supports a maximum of 16GB DDR3L RAM, and is configured with a 2GB SSD for storage, which can stably store a large number of control programs, configuration parameters and real-time operation data of the system.
  • Power and Environmental Parameters
    • The input voltage is 24V DC, the output voltage is 5V DC, and the maximum power consumption is 22W, which meets the power supply standards of industrial control systems.
    • The operating temperature range is -40°C to +70°C, and the storage temperature range is -40°C to +85°C. It can adapt to the extreme temperature changes of most industrial sites.
    • It can work normally in an environment with a humidity of 5% to 95% non-condensing, has an anti - shock capacity of 30g (11ms) and an anti - vibration capacity of 5g (10 - 150Hz).
Read more
Quick view

Triconex 3101 Tricon Main Processor Module

Technical Specifications
    • Processor and Memory Parameters
      • It is equipped with a 32-bit Motorola MPC860 processor running at a clock speed of 50 MHz, which efficiently supports the operation of complex control logic.
      • It is configured with 6MB Flash PROM for stable storage of application programs, 16MB DRAM for running programs and storing sequence of events data, and 8KB NVRAM dedicated to maintaining variables.
    • I/O and Power Parameters
      • It is equipped with 8 digital input channels, 8 digital output channels, 4 analog input channels, and 4 analog output channels. It supports input types such as dry contacts, photoelectric signals and analog signals, and output types including relays and transistors.
      • The digital output current reaches 500mA, the typical input voltage is 24V DC, and some models can support 5V DC input. The module has a rated power of 12W.
Read more
Quick view

Triconex 3481 Analog Output Module

Technical Specifications
  • Output and Signal Parameters
    • It has 4 common - return, DC - coupled output channels, with a 12 - bit resolution and an output accuracy of less than 0.25% of the full - scale range within the 4 - 20mA controlled current range.
    • The output current can reach an over - range of 0 - 22mA and also has a 0mA output capability, with a step function response time of less than 2ms.
    • The typical switch time when a channel fails is 1ms, and the maximum switch time does not exceed 3ms.
  • Power and Loop Parameters
    • The nominal external loop power supply is 24V DC, and the maximum allowable voltage is 32V DC, with reverse voltage protection.
    • For a 300Ω load, the loop power supply needs to be over 16V DC with a minimum current of 1A; for an 800Ω load, the loop power supply must be over 28V DC with a minimum current of 1A.
    • It has continuous over - range protection against 36V DC and 0V DC, which effectively protects the internal circuitry from damage due to abnormal voltage.
Read more
Quick view

Triconex 3503EN High-Reliability Digital Input Module

Technical Specifications
  • Input and Signal Parameters
    • It supports 24V AC/DC input voltage, with a recommended input voltage range of 20 - 42.5V DC and a maximum allowable voltage of 42.5V AC/DC.
    • It is configured with 32 input channels, which are grouped into commoned units of 8 channels each. The input frequency is 47 - 63Hz for AC 24V and 50Hz for DC 24V, with a millisecond-level response time to capture field signal changes rapidly.
    • The point isolation voltage reaches 1500V DC, which effectively isolates external electromagnetic interference and ensures the accuracy and stability of input signals.
  • Power and Physical Parameters
    • It uses a 24V DC power supply and has a power consumption of less than 5W, which matches the power configuration of most industrial control systems.
    • It is designed for 19-inch rack installation, with dimensions of 150mm in width, 80mm in height and 50mm in depth. Its actual weight is 4 kilograms, and the transport weight is 10.5 kilograms.
Read more
Quick view

Triconex 3504E High-Density Triple Modular Redundancy Digital Input Module

  • Technical Specifications
    • Input and Signal Parameters
      • It is configured with 64 commoned, DC-coupled input channels. It offers software-selectable voltage options of 24 VDC or 48 VDC, adapting to different industrial field requirements.
      • The voltage range for 24 VDC is 15 - 30 VDC with a maximum voltage of 36 VDC; for 48 VDC, the range is 20 - 72 VDC. The turn-on voltage threshold exceeds 15 VDC for 24 VDC and 32 VDC for 48 VDC, while the turn-off threshold is below 6 VDC for 24 VDC and 11 VDC for 48 VDC.
      • The nominal turn-on current is 2 - 3 mA. The input delay is less than 2 ms for 24 VDC and less than 10 ms for 48 VDC, and the minimum point isolation voltage reaches 1500 VDC.
    • Physical and Weight Parameters
      • There are conflicting data on its physical dimensions from different sources, but it is designed for integration into standard Triconex system racks. One source lists its weight as 5000 grams, while another cites approximately 0.5 kilograms, and these discrepancies may stem from differences in whether accessories are included in the weighing.
    • Environmental Parameters
      • It maintains stable operation within an operating temperature range of -40°C to 70°C, which allows it to adapt to extreme temperature conditions in various industrial sites.
      • It has a protection level of IP65, enabling it to resist the impact of dust and water in harsh industrial environments and ensuring long-term reliable operation.
Read more
Quick view

Triconex 3511 High-Precision Triple Redundant Pulse Input Module

Technical Specifications
  • Input and Signal Parameters
    • It is equipped with 8 independent non-common-ground input channels. The typical input voltage is 24 VDC, and the typical input current per channel is 10 mA.
    • The input signal frequency range is 1 Hz to 100 kHz, and the precision reaches ±0.01% when measuring frequencies between 1000 Hz and 20000 Hz.
    • It has a 16-bit resolution and a pulse counting resolution of 1 microsecond, and the pulse width resolution ranges from 100 microseconds to 10 milliseconds, which can capture pulse signal changes accurately.
  • Power and Physical Parameters
    • It relies on 24 VDC power supply to operate stably, matching the power supply configuration of most industrial control systems.
    • There are differences in dimension and weight data from different sources. One source states its dimensions as 80mm x 110mm x 40mm and weight of approximately 200 grams, while another source records dimensions as 120mm x 80mm x 30mm and weight of about 3.3 kilograms, which may be due to whether the measurement includes accessories.
Read more
Quick view

Triconex 3625C1 32-Point Triple Modular Redundancy Digital Output Module

Technical Specifications
  • Electrical Parameters
    • It is configured with 32 commoned digital output channels, the nominal output voltage is 24 VDC, and the adaptive voltage range is 16 - 32 VDC, with a maximum withstand voltage of 36 VDC.
    • Each output channel can provide a maximum current of 1.7 A, the overall power consumption of the module is less than 13 watts, and some data shows that its output power can reach 15 watts.
    • It adopts a dual-power design, which further improves the stability of power supply and avoids system operation interruption caused by single power failure.
  • Processing and Memory Parameters
    • It is equipped with a dual-core PowerPC processor with a clock frequency of 800 MHz, which can efficiently support complex control algorithms and logic operations.
    • The module provides a memory range of 1 GB - 8 GB, which can store a large number of control logic programs and real-time operating data to meet the needs of complex industrial control scenarios.
Read more
Quick view

TRICONEX 9563-810 Digital Input Termination Panel

Technical Specifications:

  • Type: Typically serves as an interface or communication module within the Tricon system.
  • Communication Protocols: Supports industry-standard protocols to ensure compatibility with various control systems and devices.
  • Power Supply: Operates within specified voltage ranges suitable for industrial environments.
  • Environmental Endurance: Designed to withstand harsh conditions including wide temperature ranges, humidity, and exposure to dust.
  • Certifications: Certified for use in Safety Instrumented Systems (SIS) up to Safety Integrity Level 3 (SIL 3), ensuring compliance with stringent safety standards.
Read more
Quick view