TRICONEX 3000656-210-REVA Fault-Safe I/O Module

• Processor and Memory Parameters
  • It is equipped with a 32-bit TriCore VME processor that delivers powerful computing capabilities to support the rapid execution of complex safety control logic.
  • It has 16 MB of RAM for real-time data processing and 2 MB of Flash ROM for storing system programs and configuration data, ensuring stable data storage and quick access.
• Communication and Backplane Parameters
  • It is configured with serial ports and Ethernet ports for data interaction with upper monitoring systems and external devices.
  • It uses the TriBus backplane with a communication rate of 25 Mbps, which guarantees efficient and stable data transmission between the module and matching I/O modules.
  • It supports connection with an RS-232 optical isolation interface, which enhances the module's anti-interference ability during communication.

• Input and Signal Parameters
  • The analog input version has 32 shared points, with a nominal input current of 4 - 20mA DC and an operating current range of 2 - 22mA DC. It has a 16-bit resolution and an accuracy of ±0.01% within the 1000 - 20000Hz frequency range.
  • The pulse input version has 8 high-frequency input points, a pulse count measurement resolution of 1 microsecond, and an input diagnostic fault range of 0.5% of the full scale. The input change sampling cycle is the longer one between one scan and 210 milliseconds.
  • The module has an input bandwidth of 16Hz, an absolute maximum field voltage of 33V DC, and an absolute maximum reverse field voltage of -0.6V DC.
• Power and Electrical Parameters
  • The nominal power supply voltage is 24V DC. The minimum isolation between functional and protective earth is 500V DC, and the minimum isolation between functional and functional earth is 800V DC.
  • The module has a source impedance of 180Ω, an input impedance of 250Ω when paired with a baseplate, and a 100Ω I-to-V resistor with a tolerance of ±0.01%.

• Electrical Parameters
  • It provides 32 commoned output channels with a nominal voltage of 24 VDC and a voltage adaptation range of 16 - 32 VDC, and can withstand a maximum voltage of 36 VDC.
  • Each output point has a maximum current of 1.7 A, a surge current of 7 A within 10 milliseconds, a minimum required load current of 10 mA, and a maximum load leakage current of 4 mA.
  • The typical voltage drop is less than 2.8 VDC at 1.7 A, the power module load is less than 13 watts, and the point isolation voltage reaches 1500 VDC to avoid electrical interference between circuits.
• Physical Parameters
  • The module weighs 0.8 kg and has dimensions of 16cm × 16cm × 12cm, featuring a compact and lightweight design that facilitates installation in various industrial control cabinets.
  • It adopts an IP20-rated enclosure and is equipped with dedicated LED indicators for each output point to show on/off states, as well as module status indicators for pass, fault, load, and active conditions.

Technical Specifications:

• Type: Typically serves as an interface or communication module within the Tricon system.
• Communication Protocols: Supports industry-standard protocols to ensure compatibility with various control systems and devices.
• Power Supply: Operates within specified voltage ranges suitable for industrial environments.
• Environmental Endurance: Designed to withstand harsh conditions including wide temperature ranges, humidity, and exposure to dust.
• Certifications: Certified for use in Safety Instrumented Systems (SIS) up to Safety Integrity Level 3 (SIL 3), ensuring compliance with stringent safety standards.