ProSoft AN-X2-AB-DHRIO EtherNet - Image 1
ProSoft AN-X2-AB-DHRIO EtherNet - Image 2
Click to enlarge
ProSoft AN-X2-AB-DHRIO EtherNet
ProSoft AN-X2-AB-DHRIO EtherNet - Image 2
ProSoft 5601-RIO-MCM Remote I/O to Modbus Master
ProSoft 5601-RIO-MCM Remote I/O to Modbus Master
Back to products
ProSoft MVI56-MDA4 MDA Scientific CM4 Gas Analyzer Master Module
ProSoft MVI56-MDA4 MDA Scientific CM4 Gas Analyzer Master Module

ProSoft AN-X2-AB-DHRIO EtherNet

  • Technical Specifications
    • Power Supply Parameters
      • The typical power consumption is 200mA at 12V DC or 100mA at 24V DC, with a maximum power consumption of 2.4W. It adapts to the common low – voltage DC power supply environment in industrial sites and has low overall energy consumption.
    • Communication Parameters
      • It is equipped with one RJ45 10/100 Mbps Ethernet port and one DH+/Remote I/O port. It supports DH+, Remote I/O and EtherNet/IP protocols and now supports DH+ migrations on SLC networks.
      • It supports all DH+ and Remote I/O baud rates, which are 57.6k baud, 115.2k baud and 230.4k baud, and Remote I/O addressing ranges from 0 to 76 octal.
    • Environmental and Physical Parameters
      • The operating temperature ranges from 0°C to 50°C, and the storage temperature ranges from -40°C to 85°C. It can withstand extreme temperature changes in both indoor and outdoor industrial environments.
      • The relative humidity tolerance is 5% to 95% non – condensing. Its dimensions are 107mm x 126mm x 34mm excluding connectors, and it weighs approximately 310 grams. It supports DIN rail mounting for convenient integration into industrial control cabinets.
Category:
Description
  • Functional Features
    • Multi – mode Operation for Diverse Upgrade Needs
      • It has multiple operation modes. The Drive mode supports upgrading legacy Allen – Bradley drives on Remote I/O to new EtherNet/IP – enabled drives and can support up to 4 EtherNet/IP drives without changing PLC code. The HMI mode allows upgrading legacy PanelViews on Remote I/O or DH+ to Ethernet/IP – based PanelView Plus series HMIs and supports up to 8 PanelViews on the same network.
      • The Remote I/O Scanner mode supports replacing legacy Remote I/O PLCs with ControlLogix or CompactLogix PACs and can handle up to 32 racks of Remote I/O. The Flex I/O Scanner mode replaces obsolete 1794 – ASB adapters and supports up to 16 EtherNet/IP connections.
    • Convenient Configuration and Diagnostics
      • The built – in web server eliminates the need for complex dedicated configuration software. Maintenance personnel can complete configuration and parameter adjustment through a web browser, and easily view real – time diagnostic data to quickly identify connection failures or data transmission abnormalities.
      • The auto – configuration utility can automatically discover baud rates and map discrete I/O, which greatly reduces configuration errors and improves the efficiency of on – site commissioning.
    • High Compatibility and Replacement Capabilities
      • It is fully compatible with Allen – Bradley equipment such as PLC – 5, CompactLogix, ControlLogix, PowerFlex drives and PanelView HMIs. It supports all PowerFlex drives on EtherNet/IP and works smoothly with various mainstream Allen – Bradley devices.
      • It can directly replace multiple old ProSoft modules, which simplifies the supply chain management for enterprises and reduces the difficulty of spare part replacement during later maintenance.
    • Stable and Reliable Operation Performance
      • The optional conformal coating enhances its resistance to harsh environmental factors such as moisture and dust in industrial sites, ensuring stable operation in harsh working conditions.
      • When upgrading related equipment in different modes, most scenarios do not require modifying the existing PLC code, which avoids operational risks caused by code changes and ensures the stable operation of the original control logic.
  • Application Scenarios
    • Legacy Drive Upgrade in Manufacturing Plants
      • In automobile assembly, electronic component processing and other manufacturing workshops, it upgrades legacy Allen – Bradley Remote I/O – connected drives to EtherNet/IP – enabled PowerFlex drives. It maintains the original PLC control logic, ensures the continuous and stable operation of production lines such as assembly lines and conveyor belts, and improves the controllability and monitoring capabilities of the drives.
    • HMI Modernization in Industrial Control Rooms
      • In industrial control rooms equipped with Allen – Bradley PLC – 5 or SLC controllers, it upgrades old Remote I/O or DH+ – connected PanelView HMIs to PanelView Plus series HMIs that support EtherNet/IP. Operators can obtain clearer interface display and faster data response while retaining the original control system, enhancing operation efficiency.
    • PLC System Migration in Petrochemical Plants
      • In petrochemical production sites with long – running Allen – Bradley Remote I/O PLCs, it helps replace the legacy PLCs with ControlLogix or CompactLogix PACs. It retains the existing racks of I/O equipment, realizes the migration of control systems at a low cost, and ensures the smooth transmission of data such as pipeline pressure and material flow between new controllers and on – site I/O modules.
    • Flex I/O Adapter Replacement in Food Processing Plants
      • It replaces obsolete 1794 – ASB adapters in food processing lines, enabling PLCs on Remote I/O to connect and control 1794 – AENT EtherNet/IP Flex adapters. It ensures the stable operation of on – site detection and execution equipment such as temperature sensors and material conveying valves, and meets the strict requirements of the food industry for production continuity.
    • DH+ to EtherNet/IP Data Link in Power Plants
      • In power plants with Allen – Bradley legacy control systems, it acts as a bridge between DH+ networks and EtherNet/IP networks. It realizes data interaction between legacy generators, transformer monitoring modules and modern EtherNet/IP – based SCADA systems. It ensures that operational data such as power generation and equipment temperature are uploaded to the central monitoring platform in real time, facilitating centralized management and early fault warning.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ProSoft AN-X2-AB-DHRIO EtherNet”

Your email address will not be published. Required fields are marked *

Shipping and Delivery
wd-ship-1
wd-ship-2

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

ProSoft 5302-MBP-MCM4MB

Technical Specifications
  • Ports:
    • 1x Modbus Plus port (DB9 female connector, fully configurable for master/slave operation).
    • 4x Modbus serial ports (RS-232/RS-485, each independently configurable for master/slave roles).
  • Protocol Support:
    • Modbus Plus: Supports master and slave implementations.
    • Modbus RTU/ASCII: Supports master and slave modes on all serial ports.
  • Mechanical Design:
    • DIN-rail mounting for compact installation in control cabinets.
    • Dimensions: 21 × 54 × 32 mm (standard industrial form factor).
Read more
Quick view

ProSoft 5601-RIO-MCM Remote I/O to Modbus Master

  • Technical Specifications
    • Electrical Parameters
      • The power supply voltage ranges from 18VDC to 32VDC, with a maximum current load of 500mA at 32VDC.
      • It adopts a passive power design that draws power directly from the connected Remote I/O scanner, eliminating the need for an independent external power supply and simplifying the wiring layout.
    • Communication Parameters
      • It supports Remote I/O, Modbus RTU and Modbus TCP protocols. The Modbus serial ports support baud rates ranging from 110 baud to 115k baud, with configurable stop bits of 1 or 2, data sizes of 7 or 8 bits, and parity options including none, even and odd.
      • The Remote I/O interface supports baud rates of 57.6k, 115k and 230k, and can realize block data transmission with the scanner, supporting BTR commands up to 63 words and BTW commands up to 64 words.
    • Environmental and Physical Parameters
      • The operating temperature ranges from -40°C to 85°C, and the storage temperature ranges from -40°C to 85°C. It can adapt to extreme temperature changes in both indoor and outdoor industrial sites.
      • The relative humidity tolerance is 5% to 95% non-condensing. Its dimensions are 222.25mm x 88.90mm x 38.10mm and it weighs 0.72kg.
Read more
Quick view

ProSoft MVI56-MDA4 MDA Scientific CM4 Gas Analyzer Master Module

Technical Specifications
  • Mechanical and Backplane Specifications
    • It is compatible with the 1756 backplane, adopts a single - slot design, and can be installed in both local and remote racks of ControlLogix chassis. It is recognized as a standard input and output module by the ControlLogix system and can access the processor memory smoothly.
  • Electrical Parameters
    • The input voltage ranges from 110V AC to 240V AC, and the operating frequency is 50Hz or 60Hz. The maximum power consumption does not exceed 5W, which shows low energy consumption and has little impact on the overall power load of the industrial control system.
  • Communication and Measurement Parameters
    • It supports Modbus RTU and Modbus ASCII communication protocols, is equipped with two RS - 232 communication ports for connecting to CM4 gas analyzers, and an RJ45 serial port for configuration operations.
    • The sampling rate can reach up to 10Hz. For common gases, the measurement range includes 0 - 25% volume for oxygen and 0 - 20000 ppm for carbon monoxide, with a measurement accuracy of ±0.5%.
Read more
Quick view

ProSoft MVI56-MNETR Modbus TCP

  • Technical Specifications
    • Mechanical and Power Parameters
      • It adopts a single-slot design compatible with the Controllogix 1756 backplane, enabling easy installation into Controllogix chassis without occupying excessive space.
      • The backplane current load reaches 800 mA under 5 VDC and 3 mA under 24 VDC, matching the power supply requirements of Controllogix systems for stable operation.
    • Communication Parameters
      • It is equipped with a 10/100 Mbps Ethernet interface with auto-crossover detection, using an RJ45 connector suitable for Cat5 cables, and it supports Ethernet/IP pass-through communication.
      • It supports storage and transfer of up to 5000 16-bit registers with the Controllogix processor through block transfer or side-connect interface. Client parameters are configurable, including a minimum response delay ranging from 0 to 65535 milliseconds, and it also supports floating-point data types.
    • Environmental and Display Parameters
      • The operating temperature ranges from 0 °C to 60 °C, and the storage temperature ranges from -40 °C to 85 °C. It can operate normally in 5% to 95% relative humidity environments without condensation.
      • It is equipped with a 4-character scrolling alphanumeric LED display that shows module version, IP address, application port settings and error information, along with LED indicators for module status, application status and error status.
Read more
Quick view

ProSoft MVI56-PDPMV1 PROFIBUS DP-V1 Master Network Interface Module for ControlLogix

  • Technical Specifications
    • Power and Physical Parameters
      • It is compatible with the 1756 backplane and occupies a single slot. The backplane current load is 800 mA at 5.1 VDC and 3 mA at 24 VDC, matching standard ControlLogix chassis power supply configurations.
      • The operating temperature range is 0°C to 60°C, and the storage temperature range is -40°C to 85°C. It can operate normally in an environment with 5% to 95% relative humidity without condensation.
      • It resists 30g operational shock and 50g non-operational shock, and can withstand 5g vibration within the frequency range of 10Hz to 150Hz, adapting to harsh industrial site conditions.
    • Communication Parameters
      • It supports all standardized PROFIBUS baud rates, with the maximum baud rate reaching 12 Mbps, meeting the requirements of high-speed data transmission in industrial scenarios.
      • It can connect up to 125 slave devices and can access PROFIBUS PA slaves through DP/PA couplers or links. It also allows multiple master modules to be installed in a single rack to expand network capacity.
      • It is equipped with an RS-232 configuration port with an RJ45 interface, and comes with an RJ45 to DB-9 male cable for on-site configuration and debugging.
    • Software Compatibility Parameters
      • It works with ProSoft Configuration Builder software, supporting functions such as importing project-specific GSD files and automatic bus parameter calculation.
      • It uses ladder logic for data transfer between the module and the processor, and a sample ladder file with add-on instructions is provided to simplify the configuration process for users.
      • It supports communication with configuration software via Ethernet routing through Rockwell Automation Ethernet interfaces such as 1756-ENBT and 1756-EN2T.
Read more
Quick view

ProSoft MVI56-PDPS PROFIBUS DP Slave Communication Module for ControlLogix

Technical Specifications
  • Mechanical and Power Parameters
    • It adopts a single-slot design compatible with the ControlLogix 1756 backplane, supporting installation in both local and remote ControlLogix racks.
    • The power consumption parameters match ControlLogix chassis requirements: 5 VDC backplane current draw is 800 mA, and 24 VDC current draw is 3 mA, ensuring stable operation without overloading the chassis power supply.
  • PROFIBUS DP Communication Parameters
    • It complies with PROFIBUS DP V0 and V1 standards, supporting baud rates ranging from 9.6 kbps to 12 Mbps for flexible network configuration.
    • The module supports up to 244 bytes of input data and 244 bytes of output data for cyclic communication. For acyclic communication, it supports PROFIBUS DP V1 services, including parameterization, diagnosis and alarm handling.
    • It is equipped with a standard DB9 male PROFIBUS DP connector, compatible with standard PROFIBUS DP cables and connectors, and supports PROFIBUS DP slave addressing from 0 to 125.
Read more
Quick view

ProSoft MVI94-GSC Flex I/O Generic Serial Communication Module

  • Technical Specifications
    • Mechanical and Power Parameters
      • It adopts DIN rail installation mode, with dimensions of 120mm x 80mm x 40mm and a weight of about 200g, featuring a compact structure that saves installation space.
      • The power supply range is 9 - 30V DC, meeting the power demand of most industrial on-site power supply systems, and its enclosure protection level reaches IP20.
      • The operating temperature range is -40°C to 85°C, which enables it to operate stably in extreme temperature environments such as cold workshops and high-temperature industrial sites.
    • Communication Parameters
      • It supports multiple communication protocols including RS-232, RS-422, RS-485, ASCII, Modbus RTU and Modbus TCP/IP, covering most serial communication needs in industrial fields.
      • The maximum baud rate can reach 115.2 kbps, and it supports flexible configuration of parameters such as data bits and stop bits to match different serial device communication requirements.
      • It is equipped with a single-slot interface that supports ASCII communication, and is built with a 4096-character data buffer to ensure the stability of data transmission and avoid data loss due to transmission delays.
    • Compatibility Parameters
      • It is fully compatible with Allen-Bradley ControlLogix and CompactLogix series PLCs, and can be perfectly integrated into the corresponding control system architectures.
      • It is compatible with various serial industrial devices such as bar code readers, scales, terminals and printers, without requiring additional adaptation accessories during connection.
Read more
Quick view

ProSoft PLX31-EIP-SIE EtherNet/IP to Siemens Industrial Ethernet Gateway

Core Function

  • Protocol Conversion: Bridges EtherNet/IP (CIP, PCCC) and Siemens Industrial Ethernet protocols for seamless interoperability between Rockwell controllers and Siemens PACs .
  • Data Exchange: Supports high-speed bidirectional transfers of up to 10,000 16-bit registers, ideal for large-scale industrial data synchronization .
Read more
Quick view